The VACUPRESS IR2103 DUAL is a high-capacity infrared oven engineered for demanding orthotics, prosthetics, thermoforming, and plastic-forming workshops. Designed to handle large sheets, shell blanks, or batch processes — and to support two independent heating tasks at once — this oven combines powerful radiant heating, precise temperature control, and flexible workflow management.  Key Features & Benefits Very large heated area — 2140 × 1040 mm: The expansive chamber lets you heat entire large-format plastic sheets or shell blanks (e.g. seat shells, full-size orthoses, large molds) in one piece — reducing seams, joints, and material handling.  Dual independent heating zones / dual thermostat control: The “DUAL” design allows you to run two separate heating processes simultaneously, including different temperature settings — for example, heating two different materials or two sheets up to ~1 × 1 m each. This increases flexibility and throughput.  Infrared radiant heating — fast, efficient, surface-focused: As with other VACUPRESS infrared ovens, the IR2103 uses direct radiant heat to warm the material directly rather than heating ambient air. This yields much faster cycle times, immediate readiness (no long pre-heat), and overall energy efficiency.  Accurate material-surface temperature control: An optical IR temperature sensor continuously measures the actual surface temperature of the material — not the air. Combined with PID control and dual-zone regulation, this ensures precise, repeatable heating without the risk of scorching or overheating.  Modern user interface with touch-panel controls: The 3.5″ touch-panel controller displays both the target (“set”) and actual material temperature. Built-in timer and ramp-up functions, graphical heating-process display, and a USB interface for firmware updates make operation intuitive and future-proof.  Flexible material handling with mobile tray & optional frame holders: Typically includes a roll-about tray on casters (for ergonomic loading/unloading of large sheets), and frame holders that can support blister-forming or deep-drawing frames — helping integrate the oven into vacuum-forming or thermoforming workflows.  Energy-efficient & workshop-optimized design: Because infrared heating acts directly on materials, no long idle heating is needed. The oven avoids unnecessary energy use, reduces warm-up times, and lowers heat emission, making it practical even in busy orthotic and prosthetic workshops.  Typical Use Cases Heating large thermoplastic sheets for custom orthotic / prosthetic shells, seating shells, or large-form components in one piece. Running two simultaneous jobs — e.g., pre-heating two different materials or two blanks of different size/thickness — to maximize throughput in busy production settings. Prepping blanks for vacuum-forming or deep-drawing of insoles, foot orthoses, AFOs / KAFOs, prosthetic sockets, or structural shells. Batch-processing multiple sheets or molds in a single heating cycle — useful for labs, clinics, or medium-to-large manufacturing workshops. Situations requiring precise, repeatable heating — such as composite prep, pre-preg processing (with vacuum-bagging), or sensitive thermoforming needing exact temperature control. Why Choose VACUPRESS IR2103 DUAL The IR2103 DUAL stands out as a powerful, versatile, and production-grade infrared oven — ideal for large-format, high-throughput, or multi-task orthotic & prosthetic workshops. Its dual-zone capability, large heating area, precise surface-temperature monitoring, and efficient infrared heating make it a core asset when you need to process big sheets, run concurrent jobs, or maintain consistent quality across many parts. For labs or shops aiming to boost capacity, reduce cycle time, and improve reliability — this oven offers a top-tier heating solution.

Read more less

The IR1303 XTR from VACUPRESS is a top-tier infrared heating oven built for professional orthotic, prosthetic, and thermoforming workshops that require large-format capacity, precise heating, and reliable temperature control. With 24 infrared quartz tubes, advanced material-surface temperature control, and a versatile mobile cart, this oven is designed to handle large sheets, shell blanks, orthotic shells, prosthetic sockets, or multiple parts in a single batch — and deliver consistent, high-quality results.  Key Features & Benefits High-power 24-tube infrared heating system: The oven uses 24 infrared-quartz tubes with reflectors, offering strong and even radiant heating across a large surface — ideal for heating big plastic sheets, shell blanks, or orthotic/prosthetic components. Two-stage switching (6 or 24 tubes) allows flexible heating intensity depending on material size.  Large heating chamber & mobile material cart: Internal dimensions of 1300 × 1590 × 500 mm provide ample space for large parts and multiple components. The included mobile material cart (with lockable casters, foldable holders for deep-drawing/blister-forming frames, and gas-spring adjustable height) makes loading/unloading ergonomic and efficient.  Surface-temperature measurement & precise PID control: Unlike conventional ovens that monitor air temperature, the IR1303 XTR uses an opto-electronic infrared sensor to measure the actual surface temperature of the material. This ensures accurate, repeatable heating and helps prevent overheating or burning of plastics — even with diverse materials or colored laminates.  Advanced controller with modern interface: The oven features a 3.5" touch-panel controller that displays set and actual material temperatures. It offers programmable heating cycles with ramp & soak, timer functionality, graphical heating-process display, individual maintenance notifications, multilingual UI, and software-updates via USB — making it user-friendly and future-proof.  Flexible operation & energy-efficient usage: With adjustable heating zones, you can activate only part of the infrared tubes when working on smaller pieces — saving energy and increasing efficiency. The system shuts off heating when the material reaches the target temperature, reducing energy waste and extending lamp life.  Workshop-ready construction: The oven includes a space-saving sliding door (vertically guided on ball bearings with gas-springs), double-pane viewing window for safety, internal lighting, and a stainless-steel interior — all designed to meet the demands of frequent daily use in orthotic, prosthetic or plastic-forming workshops.  Typical Use Cases Pre-heating large thermoplastic sheets, EVA foils, or shell blanks for vacuum-forming insoles, foot orthoses, AFO/KAFO shells, prosthetic sockets, or large orthotic components. Forming big orthotic shells or prosthetic socket molds for adult use — large enough to accommodate size-heavy parts. Batch processing multiple parts or large-format pieces in a single heating cycle — ideal for labs and workshops dealing with multiple orders. Preparing materials for lamination, composite lay-up, or post-forming treatments — especially when using pre-preg or layered plastics requiring precise temperature control. Workshops, clinics, or manufacturing facilities requiring a reliable, high-capacity heating solution that balances speed, precision, and ergonomics. Why Choose VACUPRESS Infrared Oven IR1303 XTR The IR1303 XTR stands out as a powerful, versatile, and professional-grade infrared oven — combining exceptional heating capacity, precise material-surface control, ergonomic material handling, and energy-efficient operation. For orthotics, prosthetics, custom footwear, or plastic-forming workshops that demand large-part capacity, repeatable results, and long-term reliability — this oven offers a future-proof solution that significantly improves throughput, material consistency, and operator convenience.

Read more less

The IR1003 is a high-performance infrared-heating oven engineered specifically for the demands of orthotic and prosthetic workshops. It provides fast, direct, and consistent heating of thermoplastic sheets, shell blanks, EVA foils, and other materials — ensuring reliable performance for vacuum forming, deep drawing, shell molding, and material pre-heating.  Key Features & Benefits Direct infrared heating — no pre-heat needed: The IR1003 uses an array of 12 specialized IR-quartz tubes to deliver radiant heat directly to the surface of the material — drastically reducing warm-up time and enabling faster processing cycles.  Surface-temperature control with optical sensor + PID controller: A built-in optical sensor monitors the surface temperature of the material in real time. This ensures precise heating, avoids overheating or scorching, and produces consistent results — even with different plastics or colored materials.  Roll-about tray with adjustable height & Teflon-coated surface: The oven includes a movable, height-adjustable tray that makes loading/unloading easier and supports blister-forming frames or flat sheets. The Teflon coating facilitates material handling and helps prevent sticking or deformation.  Optimized for orthotics & prosthetics work: Heated area (~ 92 × 72 cm) is well suited for plastic sheets, shell blanks, foot-orthotic components, socket shells, and similar parts — making the IR1003 practical for workshops producing orthoses, prosthetic sockets, and custom devices.  Energy-efficient & responsive: Because infrared heating directly targets the material — not the surrounding air — the IR1003 requires no lengthy preheating. Heating begins only when required, reducing energy consumption and shortening processing cycles compared to traditional convection ovens. User-friendly, workshop-ready design: The oven’s controls allow custom heating cycles (timers, ramp-up) to match different materials and workflows. The carriage tray, safety shutoff when the door is opened, and robust build make it suitable for daily use in busy labs or clinics.  Typical Use Cases Pre-heating thermoplastic sheets, EVA or PP/PE blanks before vacuum-forming insoles, shells, prosthetic sockets, or orthotic devices. Softening plastic blanks for thinning, trimming, or manual molding — e.g., foot orthoses, insoles, shell components, or custom shoe parts. Heating blister-forming trays for prosthetic socket molds or deep-drawing applications. Rapid turnaround small-to-medium batch processing — ideal for clinics, custom orthotic labs, prosthetic workshops, or custom-shoe makers. Material preparation before lamination, bonding, or forming — ensuring uniform heat and controlled softening for consistent results. Why Choose IR1003 The IR1003 stands out by combining speed, precision, and practicality — delivering direct, controlled infrared heating in a form factor optimized for orthotic and prosthetic production. Its surface-temperature control, infrared heating array, and ergonomic design make it an effective alternative to traditional convection ovens — especially when you need fast cycles, consistent results, and energy-efficient heating. For professionals working with plastics, orthoses, prosthetic shells, and custom components, the IR1003 is a reliable, high-quality heating solution.

Read more less

The IR1001 COMPACT is a bench-top infrared heating oven engineered to meet the needs of orthotic & prosthetic labs, custom footwear makers, and small-batch thermoforming workshops. By using infrared radiation instead of ambient air heating, it provides rapid, consistent warming of plastic sheets, EVA, liners, and shell materials — enabling efficient vacuum forming, molding, or material heating — without long pre-heating times.  🔥 Key Features & Advantages Efficient infrared heating with 12-tube array: Twelve IR-quartz tubes (with reflectors) deliver direct surface heating — enabling fast, even heating of plastic sheets and components without overheating surrounding air.  Material surface temperature control: An optical IR-temperature sensor monitors surface temperature in real time. Coupled with a digital PID controller, this ensures accurate, repeatable heating cycles — minimizing risk of scorching or warping.  Wide heating area for versatile parts: The internal working area (heated tray) offers approx. 1000 × 800 mm (external dims: 1270 × 920 × 455 mm), giving sufficient space for large plastic sheets, insoles, orthotic shells, or multiple small parts at once.  Pull-out tray for easy loading/unloading: A full-size, ball-bearing-mounted tray slides out for straightforward placement and removal of materials — simplifying workflow and improving ergonomics.  Bench-top design, optional stand: Its relatively compact footprint allows integration into smaller workshops or labs. For more ergonomic working height, an optional stand is available.  Instant-on operation & energy-efficient: Because infrared heating acts directly on material surfaces rather than heating the whole chamber air — there is no long warm-up time. Heating is demand-based, reducing unnecessary energy use and speeding up cycles.  Common Use Cases Pre-heating thermoplastic sheets, EVA blanks, liners, or plastic sheets before vacuum-forming or deep-drawing — for insoles, foot orthoses, prosthetic shells, shoe soles, and similar components. Softening materials for manual forming — for custom orthotics, shoe modification, casting/heat forming, and shell adjustments. Small-batch or bespoke production — suitable for clinics, prosthetic labs, orthotic workshops, custom footwear makers, or rehab-device fabrication sites with limited space. Heating multiple small parts or several components in a single batch — increasing efficiency for workshops handling diverse orders. Why Choose IR1001 COMPACT The IR1001 COMPACT stands out for its speed, precision, and flexibility — combining advanced infrared heating technology with a practical bench-top design. It gives orthotic and prosthetic technicians, shoemakers, and small workshop owners a reliable, efficient way to warm, soften, or shape plastics and thermoplastics without the complexity or footprint of large industrial ovens. Especially valuable when you need fast turnaround, consistent heating results, and a workspace-friendly solution.

Read more less

The IR803 is a compact but powerful infrared-heating oven designed specifically to meet the needs of orthotic, prosthetic, and custom-footwear workshops. It delivers quick, even heating of thermoplastics, blister-forming trays, sheet materials, and other plastics — making it an essential tool for vacuum forming, deep drawing, shell molds, and pre-forming preparation.  Core Features & Benefits Direct infrared heating — no preheating required: Unlike conventional convection ovens, the IR803 uses infrared-quartz tubes to heat material surfaces directly, dramatically reducing warm-up times and increasing workshop throughput.  Precise material-surface temperature control: An integrated optical IR-sensor coupled with a microprocessor-based PID controller continuously measures the surface temperature of the material — preventing overheating or burnt plastics and guaranteeing consistent results.  Wide temperature range & flexible process control: Temperature is infinitely adjustable between ~30 °C and 250 °C, suitable for a broad range of thermoplastics. Built-in timer and ramp functions allow custom heating cycles and gentle heat-up, ideal for sensitive materials.  Workshop-ready ergonomic design: The IR803 includes a pull-out Teflon-coated tray for easy loading of sheets or forming frames, double-pane viewing windows for safe monitoring, and interior lighting — making it practical for daily use in labs or clinics.  Efficient & energy-saving operation: With no need for long pre-heating and no idle-time heating of air (as happens in convection ovens), the IR803 offers faster cycle-times and lower energy consumption — helping lower operating costs.  Typical Use Cases Pre-heating thermoplastic sheets or blanks for vacuum-forming insoles, orthotic shells, prosthetic sockets, or foot orthoses. Heating blister-forming trays for prosthetic/quasi-sock molds or thermoforming applications. Softening EVA, PP/PE, or other polymer sheets prior to forming or shaping. Preparing plastic parts before post-processing, bonding, or shell sealing. Batch processing small to medium-size plastic sheets — ideal for clinics, ortho labs, and custom-device

Read more less

The VACUPRESS Pre-Preg Oven PO1800 is a professional-grade convection oven engineered especially for the demands of pre-preg composite processing, thermoforming support, and orthotic/prosthetic manufacturing workflows. Its large interior, advanced control system, and built-in vacuum connectivity make it a top-tier solution for curing, forming, or finishing composite and thermoplastic parts — from small orthoses to large shell molds and structural components.  Key Features & Benefits Spacious oven chamber for large molds and shells — With internal dimensions of approximately 1000 × 620 × 1790 mm (W × D × H), the PO1800 provides ample space for hanging molds, full-size orthotic or prosthetic shells, larger thermoplastic parts, or multiple items at once.  Advanced microprocessor control with PID regulation — Equipped with a modern control panel (touch-interface) that allows you to precisely manage temperature, program custom heating cycles (ramp & soak), and monitor material-core temperature for optimal curing or forming results.  Material-temperature sensing & programmable heating profiles — The built-in mould/material sensor enables the oven to regulate heating based on the actual part temperature (not just ambient air), ensuring accurate, repeatable results when processing composites or sensitive thermoplastics.  Vacuum integration for pre-preg and lamination workflows — Includes a standard 4-port vacuum connector inside the chamber plus an external water-separator, enabling vacuum bagging or vacuum-assisted lamination processes directly inside the oven. This is essential for high-quality composite socket shells, braces, or orthotic components.  Energy-efficient three-zone chamber segmentation — The oven’s internal shelving and zoned segmentation allow reduction of active volume when processing smaller molds — improving energy efficiency and reducing heating times when full-height capacity isn’t needed.  Heavy-duty, workshop-ready build — Large double doors, stainless-steel interior, built-in lighting, and a robust frame make PO1800 suitable for frequent use in busy prosthetic, orthotic, or composite-shell manufacturing environments.  Typical Use Cases Curing pre-preg composite (carbon-fiber, fiberglass and similar materials) sockets, orthotic shells, braces, AFO/KAFO components, or structural parts under vacuum-bag conditions. Vacuum-bag processing or lamination of composite shells or structural components requiring combined vacuum and heat. Thermoforming, heat-treating or post-forming curing of larger orthotic, prosthetic, or custom-footwear shells and components. Batch-processing multiple molds or large parts in one batch — ideal for labs or workshops managing production runs or larger projects. Mixed workflows combining vacuum forming, composite lamination, and post-forming curing — especially useful in orthotics/prosthetics labs, rehab centers, custom-device workshops, and production facilities. Why Choose VACUPRESS Pre-Preg Oven PO1800 The PO1800 oven stands out as a professional-grade, versatile, and production-ready heating solution — combining a large working capacity, precise material-temperature control, integrated vacuum capability, and energy-efficient chamber segmentation. Whether you’re manufacturing composite sockets, orthotic shells, prosthetic components, or thermoformed devices, this oven ensures top-tier control, repeatability, and quality — making it an excellent investment for any serious orthotics/prosthetics lab or composite-shell production workshop. 

Read more less

The VACUPRESS Pre-Preg Oven PO1200 is a professional-grade convection heating oven specifically engineered for the demands of pre-preg composite processing, thermoforming support, and orthotic/prosthetic manufacturing workflows. Its large interior, precise temperature control, and intelligent heating management make it an ideal solution for curing, pre-heating and processing composite or thermoplastic materials — from small orthoses to larger shells and components.  Core Features & Benefits Designed for pre-preg composite processing: PO1200 is purpose-built to meet the stringent requirements of pre-impregnated composite materials — allowing reliable curing and processing with vacuum bagging or mould-based forming.  Large, workshop-ready chamber: The oven interior measures approximately 1000 × 620 × 1200 mm, big enough to accommodate hanging moulds, large shells, or multiple parts at once — ideal for orthotic shells, prosthetic socket moulds, or larger thermoformed components.  Precision heating control via microprocessor & PID regulation: A microprocessor-based controller with touch-panel interface delivers accurate temperature regulation, ensuring reproducible curing cycles and material integrity — critical in composite and pre-preg workflows.  Material-temperature sensing & programmable cycles: A built-in mould/material sensor allows the oven to control heating based on the actual core temperature of the part — not just ambient air temperature. Combined with a Timer & Ramp function, the user can program custom heating profiles for different materials and parts.  Energy-efficient, adaptable chamber size: A three-zone segmentation system (with intermediate shelf) reduces the internal volume when processing smaller molds, lowering energy consumption and improving heating efficiency.  Vacuum integration ready: The PO1200 comes standard with 4 vacuum connectors and an external water-separator — enabling vacuum bagging or vacuum-assisted lamination directly inside the oven, a crucial feature for composite socket and shell fabrication.  Workshop-grade build & usability: Spacious double-door design for easy loading/unloading, stainless-steel interior finish, built-in lighting, and robust structure — ready for daily use in clinics, orthotic labs, prosthetic workshops, or composite manufacturing facilities.  Typical Use Cases Curing pre-preg carbon-fiber or fiberglass composite shells for prosthetic sockets, AFOs, orthotic braces, or custom orthotic components. Vacuum-bag processing of composite laminates — combining heating and vacuum in one controlled environment. Pre-heating or post-curing thermoformed parts (e.g. orthotic shells, insoles, foot orthoses) to stabilize shape or prepare for finishing. Processing multiple molds or larger parts in a single batch — useful for labs, clinics, and small- to medium-scale production workshops. Supporting mixed workflows — from vacuum forming to composite lamination — providing flexibility for O&P, custom footwear, or prosthetic manufacturing environments. Why Choose the PO1200 Oven The Pre-Preg Oven PO1200 stands out because it brings precision, capacity, versatility, and process-control in one comprehensive solution — bridging the gap between standard heating ovens and full-scale industrial curing ovens. If you work with composites, require vacuum-assisted lamination, or need reliable, repeatable processing of thermoplastics and shells, the PO1200 is a future-proof investment that ensures consistent quality and efficiency in orthotics, prosthetics, and custom manufacturing.

Read more less

The VACUPRESS Convection Oven Size 4 is a powerful, spacious convection-heating cabinet designed to meet the demands of professional orthotics, prosthetics, custom footwear, and thermoforming workshops. With a significantly larger interior than smaller ovens, it accommodates larger thermoplastic blanks, shell molds, foot orthoses, prosthetic components, and other sizable parts — making it a versatile and efficient heating solution for pre-heating, softening, curing, or drying.  Core Features & Benefits Large interior capacity — The generous internal volume and wide inside width make the Oven Size 4 suitable for larger molds, orthotic shells, prosthetic components, or batch-processing multiple parts at once.  Powerful heating with fan-assisted convection — Equipped with a 3000 W heating system and a fan motor (with reversible rotation) to ensure uniform, even heat distribution across the chamber — minimizing hotspots and ensuring consistent softening or curing.  Adjustable temperature & timer control — The thermostat provides a wide adjustable temperature range (typical for VACUPRESS ovens: from ~ 60 °C up to ~ 280 °C) and a timer that can be set from 0–120 minutes or used for continuous operation — giving you full control over material heating cycles.  Robust, workshop-ready construction — Built with a stainless-steel housing (interior and exterior), a durable door with a large double-pane viewing window, and stable door supports — designed to withstand frequent use in busy clinics, labs, or manufacturing settings.  Versatility across workflows — Whether you need to preheat large thermoplastic blanks before vacuum forming, soften materials for molding, cure formed orthotic shells, or dry plastic components / laminates — the Oven Size 4 adapts to a wide range of production needs. Typical Use Cases Pre-heating thermoplastic sheets or shell blanks (for foot orthoses, prosthetic shells, AFO/KAFO components) before vacuum forming or molding. Softening plastics for thermoforming or reshaping in custom footwear, orthotic, or prosthetic fabrication. Post-forming heating, curing, or drying of molded components (shells, braces, insoles) to stabilize shape and properties. Batch processing multiple parts or larger molds — useful for medium- to large-volume workshops or production runs. Preparing laminates, sandwich materials, or composite shells before lamination or vacuum infusion work in orthotic/prosthetic labs. Why Choose VACUPRESS Convection Oven Size 4 The VACUPRESS Convection Oven Size 4 stands out as a robust, high-capacity, and industrial-grade heating solution — balancing powerful performance with workshop-friendly usability. For orthotic and prosthetic labs, custom footwear manufacturers, and thermoforming workshops that need reliable, uniform heating for larger parts or high throughput, this oven offers the capacity, control, and durability required to streamline production and ensure consistent results.

Read more less

The VACUPRESS Convection Oven Size 2 is a robust, mid-sized convection heating cabinet designed specifically for orthopedic, prosthetic, and custom footwear workshops. With a larger interior compared to its smaller sibling, this oven supports efficient heating of bigger thermoplastic sheets or components — making it an excellent tool for thermoforming, pre-heating, post-forming curing, or general material preparation.  Key Features & Benefits Generous interior for larger parts: With internal dimensions of approximately 430 × 330 × 360 mm, the Size 2 oven accommodates larger thermoplastic cuts, insoles, shell blanks, or orthotic components — giving you flexibility beyond small-scale heating.  Stepless temperature control: The thermostat allows continuous adjustment from 50 °C to 270 °C, enabling precise matching to the softening point of a wide range of thermoplastics and materials used in orthotics and prosthetics.  Flexible timer and continuous-operation modes: The built-in timer can be set from 0 to 60 minutes, or you can choose continuous heating — useful for varied workflows such as pre-heating, curing, or drying.  Even heat distribution via fan-assisted convection: The integrated heating element (2400 W) plus a fan ensure homogeneous air circulation, reducing hot spots and delivering consistent, uniform heating across materials.  Durable stainless-steel construction: Both the interior and exterior housings are stainless steel, offering longevity, easy cleaning, and resistance to workshop wear. The door features a large double-glazed viewing window for safe and convenient monitoring during the heating process.  Convenient for everyday workshop use: Comes standard with two grids and two trays, enabling simultaneous heating of multiple parts or batch processing — ideal for labs and production environments with moderate throughput.  Common Use Cases Pre-heating thermoplastic sheets, EVA foils, or insole materials before vacuum-form or thermoforming processes. Softening plastic blanks or shells for custom foot orthoses, prosthetic socket blanks, or shoe-orthotic components. Post-forming curing or drying of molded orthotic components, insoles, or prosthetic shells to stabilize shape before finishing. Batch-heating multiple parts or materials — useful for small-to-medium workshops, clinics, or custom footwear/orthotic labs. General material conditioning (softening, heating, drying) — supporting flexible workshop workflows without needing large industrial ovens. Why Choose Convection Oven Size 2 The Convection Oven Size 2 is a balanced, reliable, and versatile heating solution — combining capacity, control, and build quality in a footprint suitable for most orthotics, prosthetics, and custom-shoe workshops. Whether you need to soften plastics, preheat materials, cure parts, or batch-process multiple components, its mix of temperature flexibility, uniform heating, and practical capacity makes it a go-to choice for professionals seeking a robust, everyday-compatible heating oven.

Read more less

The VACUPRESS Convection Oven Size 1 is an extremely compact heating cabinet, purpose-built to complement thermoforming and vacuum-forming devices. It offers consistent, evenly distributed heat — ideal for pre-heating thermoplastics, softening materials, or curing molded parts before or after forming.  Key Features & Benefits Uniform, gentle heating: As a convection oven, it circulates warm air around the material — ensuring even heating and reducing the risk of hot spots or uneven softening, which is critical when preparing thermoplastics for forming or rework.  Compact bench-top design: Its small footprint makes it a great fit for clinics, orthotic labs, or small-to-medium workshops where space is limited — yet heating capability is still required.  Reliable accessory for thermoforming workflows: Works well as a supporting device for vacuum-forming presses and deep-drawing units — facilitating pre-heating, post-forming curing or drying of orthotic shells, insoles, or prosthetic components. Versatile use cases: Suitable for softening EVA, thermoplastic sheets, insole materials, or other plastics — also useful for curing or drying parts after forming, lamination, or composite work. Typical Use Scenarios Pre-heating thermoplastic sheets or insoles before vacuum-forming or molding to ensure flexibility and proper forming behavior. Post-forming heat treatment or drying of molded orthotic shells, foot orthoses, prosthetic shells, or custom footwear parts. Softening or warming materials prior to assembly — such as prepping insoles, heel lifts, braces, or shell components. General workshop tasks like curing adhesives, drying composite layups, or gently heating parts before further processing. Why Choose VACUPRESS Convection Oven Size 1 The Convection Oven Size 1 stands out for combining precision, reliability, and compactness — giving you an essential heating tool that integrates smoothly into any orthotic, prosthetic, or shoe-making workflow. Whether used for pre-heating, curing, drying, or material softening, it helps ensure consistent results and improves the quality and repeatability of thermoforming and lamination work — without requiring large industrial ovens or excessive floor space.

Read more less

The VACUPRESS Activation Device AG33 is a specialized heating unit designed to activate adhesives, soften orthotic materials (e.g. EVA foils), or heat-mold plastics — making it a valuable tool in orthotics, prosthetics, custom insole work, and shoe manufacturing. It ensures fast, even heating, with flexible control to suit different materials and applications.  Key Features & Benefits Dual-tray heating for flexibility: The AG33 features two heating trays, allowing you to process multiple parts or materials simultaneously — useful for batch work or preparing multiple insoles / orthotic inserts at once.  Infrared heating with multi-level control: It uses 9 fast-infrared tubes distributed across three independently switchable heating levels. This enables precise control of heating intensity and even heat distribution — important when working with different plastics or adhesive types.  Quick and consistent glue activation / material warming: The unit efficiently activates adhesives or warms materials, reducing wait times and improving workshop throughput — ideal for shoe repair, orthotic fabrication, or prosthetic finishing.  User-friendly operation: Simple controls, clear heating level selection, and easy-to-access trays make the AG33 straightforward to operate, even for busy clinics or workshops.  Compact and robust build: Designed to fit comfortably in a workshop or lab bench environment. Its size and weight make it suitable even for small clinics or custom footwear/orthotic workshops where space is at a premium.  Typical Use Cases Activating shoe-repair adhesives before bonding soles, insoles, or heel lifts — ensuring proper glue activation and strong adhesion. Pre-heating insoles, orthotic shells, EVA sheets, or plastic parts before vacuum-forming or molding — improving flexibility and molding accuracy. Heating foot-orthotic components prior to final shaping, fitting, or assembly in prosthetic or orthotic labs. Batch-processing multiple components (e.g. two insoles or shell halves) simultaneously, increasing efficiency in small to medium workshops. Why Choose VACUPRESS Activation Device AG33 The AG33 stands out because it combines precision heating, flexibility, and workshop-friendly design — delivering reliable glue activation and material warming without the complexity or size of full ovens. For orthotics & prosthetics labs, custom-footwear makers, or shoe-repair workshops that value speed, consistency, and quality — the AG33 offers a practical, high-value solution that integrates seamlessly into production workflows.

Read more less

The VACUPRESS 1500 is a professional-grade vacuum thermoforming machine engineered for orthopedic technology-workshops, prosthetics/orthotics labs, and custom seating or lying orthoses production. Its robust design, large forming area, and powerful vacuum system make it ideal for handling heavy and large models — from seating shells and lying orthoses to complex orthotic/plastic components for adult patients.  Key Features & Benefits Spacious forming frame for large parts: With frame dimensions of 1100 × 1500 mm, the VACUPRESS 1500 offers ample space to thermoform large shells, seating systems, braces, or orthotic bases — perfect for components that require significant surface area.  Ergonomic open-table design: The machine’s open, table-like construction results in a lower working height and better use of space under the work surface. This design simplifies the handling of large or heavy models — reducing strain and improving workflow efficiency.  Gas-spring–assisted foldable frame: The thermoforming frame is supported by two gas pressure springs, ensuring safe and easy opening/closing — which makes operation smoother and less labor-intensive, especially when working with heavy molds.  Powerful, maintenance-free vacuum system: Equipped with a dry-running, oil-free rotary-vane vacuum pump (capacity 40 m³/h, final pressure ~200 mbar) — offering strong, stable suction for consistent deep-drawing even on large or complex shapes.  Automatic vacuum-control automation: The machine automatically shuts off the pump when the target vacuum is reached, and reactivates when pressure drops — ensuring steady, reliable vacuum throughout the forming process without manual monitoring.  External-vacuum outlet for accessory stations: The VACUPRESS 1500 includes separate vacuum connections — enabling external vacuum workstations (e.g. for resin casting, socket pulling, or drape molding). All vacuum automation features apply — allowing remote control from external workstations.  Workshop-ready construction: Built for professional orthopedic, prosthetic, or custom-installation workshops. With robust frame, industrial-grade pump, and a design that accommodates heavy, large models — the 1500 is a reliable centerpiece for in-house vacuum forming operations. Typical Use Cases Manufacturing large seating shells and lying orthoses for adult or pediatric patients.  Creating full-size orthotic shells, braces, or structural plastic components requiring large-forming area and strong suction. Working on custom prosthetic or orthotic devices, where repeatability, precision, and the ability to handle heavy molds are critical. Supporting multi-step workflows — thermoforming shells, then finishing them, or integrating external vacuum-based resin casting or molding tasks via external vacuum outlets. Why Choose VACUPRESS 1500 The VACUPRESS 1500 stands out when you need size, power, and reliability in vacuum-forming: it bridges the gap between small bench-top presses and industrial-scale units — offering a balance of large capacity, ergonomic design, and professional-grade suction performance. For orthopedic and orthotic workshops, prosthetic labs, or clinics that require forming large shells, seating molds, and structural components — the 1500 brings consistent, high-quality thermoforming capabilities.

Read more less

The VACUPRESS 900 XR COOL-TEC is a top-tier vacuum-deep-drawing machine built for demanding orthopedic, prosthetic, orthotic, and custom footwear workshops. It combines a large forming frame with advanced heating, vacuum control, and a built-in cooling system — delivering precision forming for insoles, footbeds, orthoses, prosthetic shells, test shoes, and even composite parts. Key Features & Benefits Large formation area & versatile frame: The working frame measures 870 × 660 mm, allowing production of larger orthotic components, full-length insoles, foot orthoses, prosthetic shells, and orthotic shoe components.  UNILOCK clamping system: Thanks to the patented UNILOCK material-clamping mechanism, the frame opens and closes with a single handle (gas-spring assisted), and adapts automatically to material thicknesses from 0.1 mm up to 12.0 mm — no manual adjustment needed. This ensures ease of use, quick material change-overs, and reliable sealing for vacuum forming.  Integrated infrared heating: 12 infrared quartz heating elements (with reflectors and two-zone control) provide uniform, efficient heating of thermoplastic sheets, enabling consistent and accurate deep-drawing. Heating time is adjustable (30–199 seconds), with LED display for set and remaining time, and automatic shut-off when the cycle completes.  Powerful, maintenance-free vacuum system: Dual oil-free vacuum pumps (each 0.45 kW, 12 m³/h, two-stage) deliver stable suction, ensuring uniform forming even for large or complex shapes. Vacuum is automatically controlled: pumps activate when the frame is closed and maintain suction until forming is complete.  Built-in COOL-TEC cooling system: Special air-jet cooling cuts down cooling time of thermoplastic parts by up to 75%, greatly reducing cycle time and boosting production throughput — ideal for busy workshops or high-volume orthotic manufacturing.  Robust construction & workshop readiness: Solid frame with smooth vertical-lift frame guidance (16 steel-rail ball-bearings), adjustable central locking mechanism, integrated work-area illumination (halogen lights), external vacuum-outlet option, and compatibility with standard orthotics materials — making the 900 XR COOL-TEC a stable, reliable core of any O&P or custom-shoe workshop.  Typical Use Cases Manufacturing custom insoles, footbeds, and shoe orthotic inserts — large-format or small-scale, as needed. Producing foot orthoses, ankle-foot orthoses (AFOs), prosthetic shells, braces, and other orthotic components where precision and consistency are critical. Creating test shoes, trial shoes, or thermoformed orthotic shell prototypes, including work with composite materials or fiber-reinforced thermoplastics (e.g., carbon-fiber composites) when using compatible materials.  Workshops requiring efficient, high-throughput vacuum forming with reduced cycle times thanks to COOL-TEC — ideal for clinics, rehabilitation centers, orthotic labs, and small to medium-size manufacturing facilities. Why VACUPRESS 900 XR COOL-TEC Stands Out The 900 XR COOL-TEC represents one of the most comprehensive vacuum-forming solutions available for the orthotics, prosthetics, and custom footwear industries. By combining a large working frame with a user-friendly UNILOCK system, powerful vacuum, precise infrared heating, and rapid cooling — it enables consistent, repeatable thermoforming across a wide variety of applications. For professionals seeking full-scale capacity, versatility, and reliable performance in a single benchtop-style press — this is a premium, future-proof solution. 

Read more less

The Makita Heat Gun Corded is built for precision, safety, and user comfort—making it an essential tool for professional and DIY applications. With a thermocouple sensor, ergonomic grip, and built-in overheat protection, it ensures accurate temperature control and safe operation. Key Features Precision Heat Control – Thermocouple sensor provides accurate temperature management for consistent results Easy-to-Operate Slide Switch – Quickly adjust heat output to suit the task Ergonomic Soft Rubber Grip – Comfortable, non-slip handle for prolonged use Overheat Protection – Built-in safeguard prevents overheating and extends tool life Corded Power Reliability – Continuous, stable power supply for uninterrupted operation

Read more less

The Makita DHG181RT Cordless Heat Gun delivers powerful, versatile, and portable heat for a wide range of applications. Powered by an 18V LXT Li-Ion battery, it produces up to 550°C air temperature and 200 L/min airflow, making it ideal for O&P professionals. Key Features High Performance – Max air temperature of 550°C and airflow of 200 L/min for efficient heating tasks Cordless Freedom – Powered by 18V LXT Li-Ion battery for maximum mobility without compromising power Quick Release Nozzle – Safe, tool-free nozzle removal with a plastic ring—no contact with hot metal required Multi-Purpose Applications – Suitable for heat shrinking wrap or tubing, soldering and desoldering electronic components, peeling adhesive tapes, loosening rusted bolts, drying, melting, unfreezing materials, wallpaper work, paint removal, and more User-Friendly Design – Lightweight, ergonomic build for comfortable extended use.

Read more less

The Vacuform combines a crimping plate, a heat shield, a digital control Panel with LCD display and two exterior vacuum outlets in a single compact concept. High-Performance vacuum The Vacuform incorporates an innovative “Maxpress” system based on a high-performance vacuum pump maintenance free, which provides optimal vacuum levels for a perfect fusion and adaptation of any type of material. It also allows the vacuum to be carried out simultaneously in the upper plate and in the external outlets. Flexibility and adaptability Thermoforming plate with high resistance silicone membrane and Unifix closing system without the need for anchoring. The wide work surface supports insoles up to size 52. Multiple connections In the back, it includes two external vacuum outlets, which allow the orthotic to be molded directly on the patient’s foot and the connection of vacuum cushions and other accessories of the Namrol range. The pedal allows a controlled vacuum, leaving the hands free for a more precise work. Multipoint heating The heat plate has a high quality nonstick and is made from aluminum, reinforced with titanium particles that absorbs energy to the maximum, heats quickly and distributes heat optimally throughout the work surface (360 x 270 mm.) Intelligent control The digital control panel with LCD screen allows total control of all functions such as: individual temperature, time and vacuum level regulation, and adjustment of the 8 work programs that it incorporates. Accelerated cooling Adaptable V-TWIN cooling kit, decreasing the cooling time of the insole up to 50%. (Optional) Comfort The heat plate is coated with non-stick Teflon which prevents the insoles and materials from adhering during heating and welding.

Read more less

Namrol Podosmart combines a crimping plate, a heat shield and a digital control Panel with LCD display in a single compact concept. Intelligent Control The digital control panel allows quick selection of functions: three temperature levels, three vacuum levels and four-time levels. Versatility Pressing plate with high resistance silicone membrane and Unifix closing system without the need for anchoring. The wide work surface supports insoles up to a number 52. High-performance vacuum Podosmart incorporates an innovative “Maxpress” system based on a high-performance vacuum pump without maintenance, which provides optimal vacuum levels for a perfect fusion and adaptation of any type of material.It also allows the vacuum to be carried out simultaneously in the upper chamber and in the external outlets. Multipoint heating The heat plate has a high quality nonstick and is made from aluminum, reinforced with titanium particles that absorbs energy to the maximum, heats quickly and distributes heat optimally throughout the work surface (360 x 270 mm.) Comfort The heat plate is coated with non-stick Teflon which prevents the insoles and materials from adhering during heating and fusing.

Read more less

The Landis Heat Activator with 6 Lamps is designed to enhance the efficiency and quality of cementing shoes and boots. Featuring six powerful 250-watt infrared lamps, this device evenly distributes heat to significantly reduce cement drying time, ensuring stronger and more reliable bonding. It is also effective at reactivating old cement quickly, allowing for fast repairs without compromising the material. Additionally, it can dry wet footwear on the spot, making it ideal for immediate restoration and maintenance. Equipped with an easy-to-use timer, the Heat Activator delivers consistent results with professional precision.

Read more less

The Qaadir Q150 Infrared Oven is engineered for the Prosthetics & Orthotics (P&O) field, providing precise and efficient heating for thermoplastic materials. Its compact design allows for use with PTFE sheets or bubble-forming frames, making it ideal for clinics, workshops, and laboratories. Key Features Designed for P&O Applications: Optimized for heating flat thermoplastic materials Efficient Infrared Heating: Provides uniform heat distribution for consistent forming Compact & Adjustable Tray: Suitable for small to medium-sized materials Selectable Heating Zones: Enables energy-efficient operation for different material sizes Precise Temperature Control: Ensures reliable results for professional use Robust Construction: Durable design suitable for repeated use in busy workshops The Qaadir Q150 Infrared Oven combines precision, flexibility, and reliability, making it an essential tool for professional prosthetic and orthotic workshops.

Read more less

The Qaadir QV500 Splinting Water Bath is designed for orthopedic workshops and hand therapy centres, providing precise and safe heating for Polyester splinting sheets. Equipped with a thermostat-controlled heater and safety thermostat, it ensures consistent temperature control, making splinting and molding operations efficient and reliable. Key Features Newest Technology Used: Incorporates advanced heating and safety features Designed for Prosthetic & Orthotic Workshops: Optimized for professional use Easy Operation: User-friendly controls for efficient workflow High Capacity: Suitable for larger Pedilon® sheets and multiple splints Mobile Design: Easy to move and position within the workspace Stainless Steel Construction with Cover: Durable, hygienic, and safe Cover Opening Handle: Convenient access for heating and handling materials The Qaadir QV500 Splinting Water Bath combines precision, safety, and usability, making it an essential tool for professional prosthetic and orthotic workshops and hand therapy centres.  

Read more less

The Qaadir QV2000 PrePreg Oven is specifically designed for advanced prepreg technology applications, providing precise and reliable heating for composite materials. Equipped with an electronic control system and timer program, it ensures consistent and accurate curing, making it ideal for O&P workshops. Key Features Advanced PrePreg Technology: Designed for precise composite material processing Electronic Control System: Ensures accurate temperature and program management Timer Program: Allows automated curing cycles for consistent results Conventional Pipe Heater: Provides reliable and uniform heating Single Door Design: Easy access with minimal heat loss Vacuum Connectors: 5 connectors inside the oven for vacuum-assisted processing Shelves and Hangers: 3 shelves and hangers for flexible material placement Water Intake Container: Convenient side container for water-assisted operations The Qaadir QV2000 PrePreg Oven combines precision, reliability, and versatility, making it an essential tool for O&P workshops working with prepreg composite materials.  

Read more less

The Qaadir QV1000 Cabinet Oven has been engineered specifically for the Orthotics & Prosthetics (O&P) field, providing precise and reliable heating for blister-forming trays, smaller flat plastic pieces, and deep-draw plastics. It efficiently heats PE and PP plastics, ensuring uniform temperature for consistent results in custom orthotic and prosthetic devices. Key Features Specialized for O&P Applications: Designed to heat PE and PP plastics efficiently Versatile Use: Suitable for blister-forming trays, flat plastics, and deep-draw products Precision Heating: Ensures uniform temperature for consistent material forming Durable Construction: Built for reliable, professional use in clinics and workshops The Qaadir QV1000 Cabinet Oven combines precision, versatility, and durability, making it an essential tool for any orthotics or prosthetics workshop requiring high-quality thermoplastic forming.

Read more less