Qaadir Bar Bender Shoe & Die Kits extend the Qaadir powered orthotic bar benders for specific bending jobs.Choose the large radius kit for smooth curves, the stirrup kit for 90-degree bends in stainless stirrups, or an offset bend kit in 6.35 mm, 4.76 mm or 3.18 mm for offsets in orthotic uprights.Key Features Large radius kit for smooth curves Stirrup kit for 90-degree stirrup bends Offset bend kits in 6.35 mm, 4.76 mm and 3.18 mm Fits both the benchtop and mobile-table powered benders Technical Characteristics Kits: large radius; stirrup; offset 6.35 mm, 4.76 mm, 3.18 mm Compatibility: Qaadir powered orthotic bar benders Typical Applications in Prosthetics & OrthoticsBending orthotic uprights, cuffs and stirrupsTypical Users Orthotic workshops O&P technicians Add Qaadir Bar Bender Shoe & Die Kits to handle every bend. Contact Qaadir for a quote.

Read more less

The Qaadir Powered Orthotic Bar Bender with Mobile Table is a compact, powerful tool for every workshop that fabricates or adjusts metal orthoses.A welded aluminium table holds your drill, shoes and dies, and paperwork, with the steel frame and mechanism of the powered bender at its heart. It comes fully assembled on caster wheels and includes a standard shoe and die set.Key Features Powered bender built into a mobile welded aluminium table Storage for drill, shoes, dies and paperwork Fully assembled, on caster wheels Standard shoe and die set included Bends aluminium and stainless steel bars, cuffs and stirrups Technical Characteristics Table: welded aluminium on casters Mechanism: steel frame Drive: standard power drill (not included) Included: 4 bars, 2 sleeves, 25 mm and 51 mm radius shoe, 1 torsion bar What's in the Kit Powered bender with mobile aluminium table Standard shoe and die set: 4 bars, 2 sleeves, 25 mm and 51 mm radius shoe, 1 torsion bar Typical Applications in Prosthetics & Orthotics Bending uprights for KAFOs and AFOs Forming cuffs and stirrups Mobile bending station for busy workshops Typical Users Orthotic workshops Clinics that fabricate or adjust metal orthoses O&P technicians The Qaadir Powered Orthotic Bar Bender with Mobile Table puts accurate metal bending on wheels. Contact Qaadir for a quote or a demonstration.

Read more less

The Qaadir Powered Orthotic Bar Bender – Benchtop bends metal orthotic bars, cuffs and stirrups at the pull of a trigger.Powered by a standard drill (not included), it bends aluminium and stainless steel smoothly and accurately. With a full range of shoes and dies, it puts tight "Z" bends close to joints, 90-degree bends in stainless stirrups and offset bends in orthotic uprights. It lets technicians of any strength bend orthoses faster and more accurately, for longer in their careers.Key Features Powered by a standard drill (not included) Bends aluminium and stainless steel bars, cuffs and stirrups Tight Z bends close to joints 90-degree bends in stainless stirrups Offset bends in orthotic uprights with optional die kits Reduces strain on technicians Technical Characteristics Drive: standard power drill (not included) Materials: aluminium and stainless steel Format: benchtop Optional: large radius, stirrup and offset bend shoe and die kits Typical Applications in Prosthetics & Orthotics Bending uprights for KAFOs and AFOs Forming cuffs and stirrups Adjusting metal orthoses in clinic Typical Users Orthotic workshops Clinics that fabricate or adjust metal orthoses O&P technicians The Qaadir Powered Orthotic Bar Bender – Benchtop makes accurate metal bending fast and easy. Contact Qaadir for a quote or a demonstration.

Read more less

The Qaadir Articulating Socket Vise & Bench Alignment Fixture holds any organic shape at any angle so the technician can work securely on all sides.Three handles control all planes of motion independently: one for rotation and height on the vertical pipe, one for rotation and reach on the horizontal pipe, and one for height on the horizontal pipe. This lets you align in the coronal and sagittal planes separately while still moving vertically without changing alignment. The frame takes a second slide for secondary arms such as rivet bars, socket pullers, flat-blade adjusters and alignment arms.Key Features Holds sockets and orthoses at any angle Three handles for independent control of every plane Align coronal and sagittal planes separately Move vertically without losing alignment Second slide for rivet bars, socket pullers and other arms Technical Characteristics Type: articulating vise and bench alignment fixture Controls: 3 independent handles Accessories: second slide for secondary arms Typical Applications in Prosthetics & Orthotics Holding sockets for trimming, finishing and riveting Bench alignment of prostheses Working on orthoses at awkward angles Typical Users Prosthetic workshops and laboratories Orthotic workshops O&P technicians The Qaadir Articulating Socket Vise & Bench Alignment Fixture holds your work exactly where you need it. Contact Qaadir for a quote.

Read more less

The Qaadir T-Handle Cast Modification Fixture holds your biggest or smallest plaster mould tight for modification.Square tube construction with a heavy threaded handle gives three points of contact for a tight grip on any size of project. The powder-coat finish resists rust and abuse for years.Key Features Three points of contact for a tight grip Heavy threaded T-handle Holds small and large moulds Rust-resistant powder-coat finish Mounting hardware and steel T-handle included Technical Characteristics Material: steel square tube, powder coated Mounting: table or workstation Typical Applications in Prosthetics & Orthotics Modifying plaster positive moulds Holding moulds for shaping and finishing Typical Users Orthotic and prosthetic workshops O&P technicians O&P training institutions The Qaadir T-Handle Cast Modification Fixture is a simple, strong essential for every modification bench. Contact Qaadir for a quote.

Read more less

The Qaadir Raised T-Handle Cast Modification Fixture is a T-handle modification fixture with square tube construction and a vice handle.It is raised 152 mm off the table and has a second vertical chamber for another mould or accessory. Supplied with mounting hardware, a durable powder-coat finish and a steel T-handle.Key Features Raised 152 mm off the table Second vertical chamber for another mould or accessory Square tube construction with vice handle Durable powder-coat finish Mounting hardware and steel T-handle included Technical Characteristics Material: steel square tube, powder coated Height: raised 152 mm Mounting: table or workstation Typical Applications in Prosthetics & Orthotics Modifying plaster positive moulds Holding moulds for shaping and finishing Typical Users Orthotic and prosthetic workshops O&P technicians O&P training institutions The Qaadir Raised T-Handle Cast Modification Fixture gives a secure grip with room for a second mould. Contact Qaadir for a quote.

Read more less

The Qaadir Cam-Lock Cast Modification Clamp is a clamp-style modification fixture that bolts to any table or workstation.A cam-style locking design clamps tight, and a vertical slot holds extra moulds. It is strong enough to hold your largest cast for shaping and sanding, and is made entirely from steel, including the welded cam handle.Key Features Cam-style locking for a tight, fast clamp Vertical slot to hold extra moulds Holds the largest casts for shaping and sanding All-steel construction including welded cam handle Bolts to any table or workstation Technical Characteristics Material: steel Locking: cam handle Mounting: table or workstation Typical Applications in Prosthetics & Orthotics Modifying plaster positive moulds Shaping and sanding casts for sockets and orthoses Typical Users Orthotic and prosthetic workshops O&P technicians O&P training institutions The Qaadir Cam-Lock Cast Modification Clamp holds your casts tight while you work. Contact Qaadir for a quote.

Read more less

The Qaadir Drape Forming Vacuum Fixture bolts to any table or workstation to drape thermoform plastic and foam devices.A vacuum-tight vice handle lets you pull plastics at any angle, including anterior shells. Made from powder-coated steel with welded seams and a long vented neck, it gives a lifetime of trouble-free fabrication.Key Features Bolts to any table or workstation Vacuum-tight vice handle for pulls at any angle Suitable for anterior shells Long vented neck Powder-coated steel with welded seams Technical Characteristics Material: welded steel, powder coated Mounting: table or workstation Process: drape forming plastics and foams Typical Applications in Prosthetics & Orthotics Drape forming AFOs, KAFOs and spinal orthoses Forming anterior shells Foam liners and interfaces Typical Users Orthotic and prosthetic workshops O&P technicians O&P training institutions The Qaadir Drape Forming Vacuum Fixture is a simple, durable way to drape form at any angle. Contact Qaadir for a quote.

Read more less

The Qaadir Aluminium Bubble Forming Oven Rack is a rigid aluminium frame that sits in any oven like a table on its side, holding the frames off the floor and letting the plastic bubble.Its open design lets you slide the bubble out of the oven without damaging it, and its rectangular shape gives two positions, closer to or further from the heating elements, to adjust heating times. Aluminium cools fast and never rusts.Key Features Fits in any oven Holds frames off the oven floor so the plastic can bubble Open design for sliding the bubble out without damage Two positions to adjust distance from the heating elements Aluminium: cools fast and never rusts Technical Characteristics Material: aluminium Positions: 2 Use: with bubble forming frames Typical Applications in Prosthetics & OrthoticsBubble forming check sockets and orthoses in a standard ovenTypical Users Prosthetic workshops and laboratories Orthotic workshops O&P technicians The Qaadir Aluminium Bubble Forming Oven Rack turns any oven into a bubble forming oven. Contact Qaadir for a quote.

Read more less

The Qaadir Double Foot Orthotic Vacuum Press is a full-size double vacuum press for thermoforming a pair of foot orthoses at the same time.It has a 381 × 457 mm pulling surface with a slotted aluminium face and a welded steel frame. Its tent-shaped bladder pulls faster and gives deeper, tighter heel cups than traditional box-shaped presses, which have a large volume of air to draw out and stretch the bladder further.Key Features Forms a pair of foot orthoses at once Tent-shaped bladder for faster pulls and deeper heel cups Slotted aluminium face Welded steel frame Supplied with rubber bladder, valve and barb Technical Characteristics Pulling surface: 381 × 457 mm Face: slotted aluminium Frame: welded steel Mounting: vacuum base or vacuum line Typical Applications in Prosthetics & Orthotics Thermoforming custom foot orthoses and insoles Forming EVA, polypropylene and composite foot orthotic shells Typical Users Foot orthotic and insole laboratories Podiatry clinics with in-house fabrication Orthotic workshops The Qaadir Double Foot Orthotic Vacuum Press doubles your foot orthotic output with better heel cups. Contact Qaadir for a quote.

Read more less

Qaadir Aluminium Bubble Forming Frames are sold in pairs and match the Qaadir rotating bubble forming platforms perfectly.They leave 25 mm of space around the platform to take any thickness of plastic. Made from thick aluminium, the frames do not warp with heat and never rust, and round holes (rather than square) give an even pull on all sides.Key Features Sold in pairs Matched to the rotating platform sizes 25 mm clearance around the platform for any plastic thickness Thick aluminium: no warping, no rust Round holes for an even pull on all sides Technical Characteristics Sizes: XLAK 610 × 559 mm (457 mm hole), AK 508 × 457 mm (356 mm hole), BK 406 × 356 mm (254 mm hole), UE 305 × 254 mm (152 mm hole) Material: thick aluminium plate Supplied as: pair Typical Applications in Prosthetics & Orthotics Holding plastic sheets for bubble forming check sockets Seamless foot orthosis forming Typical Users Prosthetic workshops and laboratories Orthotic workshops O&P technicians Pair Qaadir Aluminium Bubble Forming Frames with the matching platform for clean, seamless bubbles. Contact Qaadir for a quote.

Read more less

The Qaadir Rotating Bubble Forming Platform fits a rotating vacuum base and turns under vacuum. Used with the matching aluminium frames, it bubble forms custom prosthetic sockets and foot orthoses with no seams.The airtight rotation gives the technician access to all sides during set-up, thermoforming and removal. Made from steel with welded seams and a powder-coat finish, the platforms will perform for years.Key Features Rotates under vacuum for access to all sides Seamless bubble forming with the matching frames Steel with welded seams and powder-coat finish Four standard sizes for transfemoral, transtibial, upper-limb and foot work Technical Characteristics Sizes: XLAK 406 mm, AK 305 mm, BK 203 mm, UE 102 mm Height: 102 mm Material: welded steel, powder coated Mounting: rotating vacuum base (sold separately) Typical Applications in Prosthetics & Orthotics Bubble forming transfemoral and transtibial check sockets Bubble forming upper-limb sockets Seamless foot orthoses Typical Users Prosthetic workshops and laboratories Orthotic workshops O&P technicians Choose the Qaadir Rotating Bubble Forming Platform in the size you need and pair it with matching frames. Contact Qaadir for a quote.

Read more less

The Qaadir Drape & Bubble Thermoforming Station is a turnkey set-up to thermoform any plastic orthotic or prosthetic device. You can drape and bubble form sockets at the same time.It has four independent vacuum chambers: two horizontal chambers with vice handles and two vertical chambers that accept any rotating attachment. A 1/3 HP vacuum pump with gauge, moisture trap and foot pedal switch pulls all four chambers at once, and sits on the shelf underneath for easy cleaning and good ventilation. The work surface height adjusts to 760, 840 or 910 mm without affecting the vacuum lines.Key Features Four independent vacuum chambers: 2 horizontal with vice handles, 2 vertical for rotating attachments 1/3 HP vacuum pump with gauge, moisture trap and foot pedal switch Pump pulls all four chambers at the same time Work surface height adjusts to 760, 840 or 910 mm Ready to thermoform out of the box with all lines and hardware Technical Characteristics Vacuum chambers: 4, independently valved Vacuum pump: 1/3 HP, 110 V, with gauge, moisture trap and foot switch Work height: 760, 840 or 910 mm Included: 2 vertical vacuum bases, 1 bubble platform kit, pump combo, lines and hardware What's in the Kit Thermoforming workstation with 4 vacuum chambers 2 vertical vacuum bases 1 bubble platform kit 1/3 HP vacuum pump with gauge, moisture trap and foot switch All vacuum lines and hardware Typical Applications in Prosthetics & Orthotics Drape forming AFOs, KAFOs, spinal and upper-limb orthoses Bubble forming check sockets Forming foot orthoses on a vacuum press attachment Typical Users Orthotic and prosthetic workshops Hospital and rehabilitation-centre O&P departments O&P training institutions The Qaadir Drape & Bubble Thermoforming Station gets a workshop thermoforming from day one. Contact Qaadir for a quote or a demonstration.

Read more less

The Qaadir 12-Chamber Rotating Thermoforming Station is a height-adjustable, rotating hexagonal table with 12 independent vacuum chambers, a 44 mm maple butcher-block top and an all-steel vacuum surge tank.Six vertical vacuum bases give 12 independent vacuum stations on one table, and accept any combination of bubble forming platforms, lamination fixtures and foot orthotic presses. The steel surge tank is through-bolted to the steel frame, with three gauges for easy viewing, overhead vacuum service and a drain valve. It is ideal for a busy lab, or lets six students work independently side by side.Key Features 12 independent vacuum stations on one rotating table Height-adjustable hexagonal top in 44 mm maple butcher block All-steel vacuum surge tank with 3 gauges, overhead vacuum service and drain valve Vertical chambers accept bubble platforms, lamination fixtures and orthotic presses Supplied with 2 rotating bubble platform kits All hoses, barbs, gauges and valves included Technical Characteristics Vacuum stations: 12 independent Top: hexagonal, 44 mm maple butcher block, rotating, height adjustable Surge tank: steel, through-bolted, 3 gauges, drain valve Included: 6 vertical vacuum bases, 2 rotating bubble platform kits, hoses, barbs, gauges and valves What's in the Kit Rotating hexagonal table with surge tank 6 vertical vacuum bases (12 stations) 2 rotating bubble platform kits All hoses, barbs, gauges and valves Typical Applications in Prosthetics & Orthotics Bubble and drape thermoforming of sockets and orthoses Wet lamination on rotating fixtures Teaching labs where several students work at once Typical Users Prosthetic workshops and laboratories Central fabrication facilities O&P training institutions The Qaadir 12-Chamber Rotating Thermoforming Station is a master of efficiency for a busy lab or classroom. Contact Qaadir for a quote or a workshop layout plan.

Read more less

The Qaadir Infrared Thermoforming Oven for Flat Plastics heats plastic and foam sheets fast and consistently for thermoforming orthoses and prosthetic components.It uses two heating methods. The lower array pre-heats and post-heats while measuring the surface temperature of the underside of the sheet for true accuracy. The upper array of 18 ceramic infrared emitters runs on a timer, like a microwave, for fast radiant heating, and is zoned to heat the edges without melting the centre. Four one-touch preset buttons cover common materials, so staff with little training can heat any plastic using the same time for the same material.Key Features Dual heating: conduction from below and infrared radiation from above 18 zoned ceramic infrared emitters for even heating to the sheet edges Underside surface temperature measurement for accurate heating 4 one-touch preset programmes for common materials Industrial safety features: protective cage, magnetic starter, signal tower with beeper and emergency stop Pull-out tray and caster wheels Technical Characteristics Heating: 18 ceramic IR emitters (top, timed) plus heated lower array Maximum plastic size: 813 × 610 mm Controls: digital timer and temperature controller with 4 presets Safety: cage, magnetic starter, signal tower, emergency stop Typical Applications in Prosthetics & Orthotics Heating polypropylene and copolymer sheets for AFOs, KAFOs and spinal orthoses Heating EVA and foam sheets for insoles and liners Drape forming over positive moulds Typical Users Orthotic and prosthetic workshops Hospital and rehabilitation-centre O&P departments Insole and foot orthotic laboratories The Qaadir Infrared Thermoforming Oven for Flat Plastics makes consistent heating simple for any team. Contact Qaadir for a quote, installation and training.

Read more less

The Qaadir Bubble Forming Oven for Prosthetic Sockets heats plastics evenly and quickly for bubble (blister) forming custom prosthetic check sockets.It combines dual-sided heating: 10 ceramic infrared elements on a timer and 2 convection elements controlled by a digital thermostat, with a circulation fan and interior light. Large interior dimensions take 533 mm diameter bubbles with a 610 mm drop, while the compact exterior fits easily in any lab. Independent heating controls give the operator full control for any plastic type and shape, and it is ideal for pre-formed plastics.Key Features Dual-sided heating: 10 ceramic infrared elements on a timer plus 2 convection elements on a digital thermostat Independent controls for the circulation fan and interior light Wall rails for easy loading and perfect positioning, with no oven rack needed; universal frame holds any frames Signal tower with green power light, red IR light and beeper at the end of the cycle Aluminium construction with latch handle, magnetic starter and emergency stop Runs on a 30 amp circuit to keep energy use low Technical Characteristics Exterior: 890 mm W × 812 mm L × 1168 mm H Interior: 610 mm W × 560 mm L × 685 mm H Maximum cold plastic size: 585 × 533 mm Bubble capacity: 533 mm diameter with 610 mm drop Weight: 65.7 kg Construction: aluminium frame with latched door Power: 30 amp circuit Typical Applications in Prosthetics & Orthotics Bubble forming transparent check sockets Heating pre-formed plastics for socket fabrication Thermoforming thick plastics with consistent, timed cycles Typical Users Prosthetic workshops and laboratories Hospital and rehabilitation-centre O&P departments Central fabrication facilities The Qaadir Bubble Forming Oven for Prosthetic Sockets gives fast, repeatable heating for every check socket. Contact Qaadir for a quote, installation and training.

Read more less

The Hardo Trumpf Rapid Press is a German-built HARDO high-speed pneumatic press for pressing soles and heels in orthopaedic and custom shoemaking.The Trumpf is the compact rapid press with separate sole and heel presses, a liquid-filled sole cushion and a pressure reducer with manometer. HARDO presses are known for efficient, safe handling: the patented HARDO-tronic safety control with automatic timer and a central emergency stop protect the operator, and the pivoting V-type pad arm makes changing shoes quick and easy. A solid steel construction and quiet, fully automatic compressor unit give a very long service life.Key Features HARDO-tronic safety control with automatic timer Separate sole press with liquid-filled sole cushion Separate heel press Pivoting V-type pad arm Includes 1 set (12 pairs) of internal presser plates Rear panel with hooks to store presser plates Compressed-air supply with pressure reducer and manometer Fully automatic compressor unit Option: high riding-boot version; bench model available Made in Germany Technical Characteristics Electrical supply: 400 V / 3 Ph / 50 Hz / 0.75 kW Dimensions (W × D × H): 640 × 580 × 1750 mm Weight: 160 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Pressing soles onto orthopaedic and custom shoes Heel attachment and pressing Bonding sole build-ups and rocker soles Shoe adjustments and repairs Typical Users Orthopaedic shoemakers Prosthetic & orthotic workshops building footwear Shoe repair and adjustment workshops Hospital and rehabilitation-centre O&P departments The Hardo Trumpf Rapid Press is a compact, safe and fast sole and heel press for busy orthopaedic shoe workshops. Supplied, installed and serviced from the UAE by Qaadir.

Read more less

The Hardo Standard Rapid Press is a German-built HARDO high-speed pneumatic press for pressing soles and heels in orthopaedic and custom shoemaking.The Standard is HARDO's cost-effective rapid press: a liquid-filled sole cushion and heel presser slide horizontally into the working position. HARDO presses are known for efficient, safe handling: the patented HARDO-tronic safety control with automatic timer and a central emergency stop protect the operator, and the pivoting V-type pad arm makes changing shoes quick and easy. A solid steel construction and quiet, fully automatic compressor unit give a very long service life.Key Features HARDO-tronic safety control with automatic timer Liquid-filled sole cushion and heel presser, sliding horizontally to the working position Pivoting V-type pad arm Includes 1 set (12 pairs) of internal presser plates Rear panel with hooks to store presser plates Compressed-air connection Fully automatic compressor unit Option: high riding-boot version; bench model available Made in Germany Technical Characteristics Electrical supply: 230 V / 1 Ph / 50 Hz / 1.1 kW Dimensions (W × D × H): 470 × 550 × 1750 mm Weight: 130 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Pressing soles onto orthopaedic and custom shoes Heel attachment and pressing Bonding sole build-ups and rocker soles Shoe adjustments and repairs Typical Users Orthopaedic shoemakers Prosthetic & orthotic workshops building footwear Shoe repair and adjustment workshops Hospital and rehabilitation-centre O&P departments The Hardo Standard Rapid Press is a reliable, affordable sole and heel press for orthopaedic shoe and O&P workshops. Supplied, installed and serviced from the UAE by Qaadir.

Read more less

The Hardo AERO+ Filter Cabinet FS-8P is a HARDO AERO+ central filter cabinet for extracting grinding and trimming dust from orthopaedic workshop machines, developed with Götz Service in Germany.Its flow-optimised design delivers more than 40% greater extraction capacity than the previous generation at the same energy demand. Two-stage pre-separation keeps most coarse dust away from the filter elements, and software-controlled jet-pulse dedusting keeps the filter surface clean for long-lasting suction and longer service intervals.Connect HARDO Ortholine machines (or other workshop machines) through a ducting network to create a cleaner, quieter and healthier workplace.Key Features HARDO AERO+ flow-optimised design: 40%+ more extraction capacity Negative-pressure (vacuum) principle with high-performance exhauster Two-stage pre-separation of coarse particles Automatic jet-pulse filter cleaning Integrated sound insulation Easy-to-remove dust containers Control cabinet mounted right, pipe connection left (mirrored layout on request) Options: adjustable control box (automatic power regulation), integrated silencer, dust-box doors Made in Germany Technical Characteristics Airflow: 4,000 m³/h Filter surface: 21.6 m² Electrical supply: 400 V / 3 Ph + N + PE / 50/60 Hz Connected load: 4.4 kW Dimensions (W × D × H): 2195 × 850 × 2000 mm Weight: 625 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Central extraction for HARDO Ortholine grinding and trimming machines Dust control for insole, orthosis and prosthetic socket grinding Extraction for routers and finishing machines in O&P workshops New workshop fit-outs and upgrades of existing machine rooms Typical Users O&P workshops running several grinding or trimming machines Orthopaedic shoe workshops Hospital and rehabilitation-centre O&P departments New workshop fit-outs planned by Qaadir The Hardo AERO+ Filter Cabinet FS-8P gives O&P workshops healthy room air, lower noise and consistently strong suction. Qaadir plans the ducting layout, installs and services the system from the UAE.

Read more less

The Hardo AERO+ Filter Cabinet FS-4P is a HARDO AERO+ central filter cabinet for extracting grinding and trimming dust from orthopaedic workshop machines, developed with Götz Service in Germany.Its flow-optimised design delivers more than 40% greater extraction capacity than the previous generation at the same energy demand. Two-stage pre-separation keeps most coarse dust away from the filter elements, and software-controlled jet-pulse dedusting keeps the filter surface clean for long-lasting suction and longer service intervals.Connect HARDO Ortholine machines (or other workshop machines) through a ducting network to create a cleaner, quieter and healthier workplace.Key Features HARDO AERO+ flow-optimised design: 40%+ more extraction capacity Negative-pressure (vacuum) principle with high-performance exhauster Two-stage pre-separation of coarse particles Automatic jet-pulse filter cleaning Integrated sound insulation Easy-to-remove dust containers Control cabinet mounted right, pipe connection left (mirrored layout on request) Options: adjustable control box (automatic power regulation), integrated silencer, dust-box doors Made in Germany Technical Characteristics Airflow: 2,000 m³/h Filter surface: 10.8 m² Electrical supply: 400 V / 3 Ph + N + PE / 50/60 Hz Connected load: 2.2 kW Dimensions (W × D × H): 1400 × 850 × 2000 mm Weight: 359 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Central extraction for HARDO Ortholine grinding and trimming machines Dust control for insole, orthosis and prosthetic socket grinding Extraction for routers and finishing machines in O&P workshops New workshop fit-outs and upgrades of existing machine rooms Typical Users O&P workshops running several grinding or trimming machines Orthopaedic shoe workshops Hospital and rehabilitation-centre O&P departments New workshop fit-outs planned by Qaadir The Hardo AERO+ Filter Cabinet FS-4P gives O&P workshops healthy room air, lower noise and consistently strong suction. Qaadir plans the ducting layout, installs and services the system from the UAE.

Read more less

The Hardo AERO+ Filter Cabinet FS-12P is a HARDO AERO+ central filter cabinet for extracting grinding and trimming dust from orthopaedic workshop machines, developed with Götz Service in Germany.Its flow-optimised design delivers more than 40% greater extraction capacity than the previous generation at the same energy demand. Two-stage pre-separation keeps most coarse dust away from the filter elements, and software-controlled jet-pulse dedusting keeps the filter surface clean for long-lasting suction and longer service intervals.Connect HARDO Ortholine machines (or other workshop machines) through a ducting network to create a cleaner, quieter and healthier workplace.Key Features HARDO AERO+ flow-optimised design: 40%+ more extraction capacity Negative-pressure (vacuum) principle with high-performance exhauster Two-stage pre-separation of coarse particles Automatic jet-pulse filter cleaning Integrated sound insulation Easy-to-remove dust containers Control cabinet mounted right, pipe connection left (mirrored layout on request) Options: adjustable control box (automatic power regulation), integrated silencer, dust-box doors Made in Germany Technical Characteristics Airflow: 6,000 m³/h Filter surface: 32.6 m² Electrical supply: 400 V / 3 Ph + N + PE / 50/60 Hz Connected load: 6.6 kW Dimensions (W × D × H): 2990 × 850 × 2000 mm Weight: 889 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Central extraction for HARDO Ortholine grinding and trimming machines Dust control for insole, orthosis and prosthetic socket grinding Extraction for routers and finishing machines in O&P workshops New workshop fit-outs and upgrades of existing machine rooms Typical Users O&P workshops running several grinding or trimming machines Orthopaedic shoe workshops Hospital and rehabilitation-centre O&P departments New workshop fit-outs planned by Qaadir The Hardo AERO+ Filter Cabinet FS-12P gives O&P workshops healthy room air, lower noise and consistently strong suction. Qaadir plans the ducting layout, installs and services the system from the UAE.

Read more less

The Hardo Caravelle Ortho Solo 75 is a made-to-order German workshop machine from HARDO's premium Caravelle series, with a fully integrated extraction system so it can run without a separate filter cabinet.The Ortho Solo 75 is the compact Caravelle sander, with a narrow and a wide belt for insole, orthosis and shoe work. Caravelle machines add an extra fine-dust filter, fully automatic filter cleaning, pneumatic belt tensioning and automatic flap control, keeping the workshop clean and quiet while delivering over 99% dust separation. Special requests can be built in at the factory.Key Features Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Heel breaster on bayonet Integrated extraction with cotton filter plus additional fine-dust filter Fully automatic filter cleaning Suction wall placed well back; removable suction nozzles Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Made to order: special equipment possible Made in Germany Technical Characteristics Series: HARDO Caravelle (integrated extraction) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: pneumatic Filtration: cotton filter + additional fine-dust filter, automatic cleaning Electrical supply: 400 V / 3 Ph / 50 Hz / 2.1 kW Dimensions (W × D × H): 720 × 780 × 1855 mm Weight: 210 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Adjusting ready-made shoes (rocker soles, raises, wedges) Trimming and sanding diabetic and accommodative footwear components Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Caravelle Ortho Solo 75 is a premium, self-cleaning sanding station for clinics and workshops that want the cleanest possible air without a central filter system. Supplied, installed and serviced from the UAE by Qaadir.

Read more less

The Hardo Caravelle Combi 115 B is a made-to-order German workshop machine from HARDO's premium Caravelle series, with a fully integrated extraction system so it can run without a separate filter cabinet.The Combi 115 B is HARDO's premium combined finisher: twin heel and sole trimmers, two sanding belts with pneumatic tension and a revolving six-tool polishing section. Caravelle machines add an extra fine-dust filter, fully automatic filter cleaning, pneumatic belt tensioning and automatic flap control, keeping the workshop clean and quiet while delivering over 99% dust separation. Special requests can be built in at the factory.Key Features Twin trimmers (B-version: heel and sole trimmer) Sanding belts 2 × 40 × Ø175 mm 6 polishing tools on rotating shafts Filter bag with flutes Integrated extraction with cotton filter plus additional fine-dust filter Fully automatic filter cleaning Suction wall placed well back; removable suction nozzles Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Made to order: special equipment possible Made in Germany Technical Characteristics Series: HARDO Caravelle (integrated extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 2 × 40 × Ø175 mm Polishing: 6 tools on rotating shafts Belt tension: pneumatic Electrical supply: 400 V / 3 Ph / 50 Hz / 3.4 kW Dimensions (W × D × H): 1150 × 780 × 1855 mm Weight: 330 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Polishing and edge-finishing on the 6-tool revolving polishing section Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Caravelle Combi 115 B is the complete premium finishing station for orthopaedic shoe and O&P workshops that want everything in one clean, quiet machine. Supplied, installed and serviced from the UAE by Qaadir.

Read more less

The Hardo Caravelle Ortho 115 B is a made-to-order German workshop machine from HARDO's premium Caravelle series, with a fully integrated extraction system so it can run without a separate filter cabinet.The Ortho 115 B combines twin heel and sole trimmers with a narrow and a wide sanding belt and a sanding wheel on bayonet. Caravelle machines add an extra fine-dust filter, fully automatic filter cleaning, pneumatic belt tensioning and automatic flap control, keeping the workshop clean and quiet while delivering over 99% dust separation. Special requests can be built in at the factory.Key Features Twin trimmers (B-version: heel and sole trimmer) Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Sanding wheel on bayonet Integrated extraction with cotton filter plus additional fine-dust filter Fully automatic filter cleaning Suction wall placed well back; removable suction nozzles Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Made to order: special equipment possible Made in Germany Technical Characteristics Series: HARDO Caravelle (integrated extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: pneumatic Filtration: cotton filter + additional fine-dust filter, automatic cleaning Electrical supply: 400 V / 3 Ph / 50 Hz / 3.95 kW Dimensions (W × D × H): 1150 × 780 × 1855 mm Weight: 320 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Caravelle Ortho 115 B is a premium, self-contained trimming and sanding workstation for demanding O&P and orthopaedic shoe workshops. Supplied, installed and serviced from the UAE by Qaadir.

Read more less