nora® Lunatec combi T1 is a three layer vulcanised expanded EVA composite sheet developed for orthopaedic insoles and foot beddings requiring excellent cushioning, shear force reduction, and reliable stabilising support. The material combines three EVA layers with different hardness levels that are permanently fused during manufacturing, creating a smooth transition between layers without the need for adhesive bonding. The special design of nora® Lunatec combi T1 features a softer middle layer embedded between two firmer layers. This structure reduces shear forces during walking and relieves stress on the musculoskeletal system. The result is improved comfort, excellent damping properties, and effective pressure distribution, making the material particularly suitable for rheumatic, diabetic, and highly sensitive feet. Because the layers are vulcanised together during production, the composite sheet offers consistent quality, clean processing, and reliable performance without displacement, glue lines, or hardening caused by adhesive films. Material construction Top layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 80 anthracite Thickness: approx. 3 mm Middle cushioning layer Material: nora® Lunasoft Z Hardness: approx. 25 Shore A Density: approx. 0.17 g/cm³ Colour: 307 medium grey Thickness: approx. 4 mm Base stabilising layer Material: nora® Lunasoft AL Hardness: approx. 52 Shore A Density: approx. 0.26 g/cm³ Colour: 09 white Thickness: approx. 8 mm Composite sheet Three layer vulcanised construction Trimmed edges for precise processing Smooth transition between hardness levels No adhesive between materials Intended applications Orthopaedic foot beddings Insoles for rheumatic feet Insoles for sensitive feet Diabetic insoles Cushioning insoles with stabilising base Pressure relief foot beddings Orthopaedic shoe insoles Multilayer orthotic constructions Key properties Excellent cushioning and damping Very good shear force reduction High comfort for sensitive feet Soft middle layer for pressure relief Integrated stabilising base Secure composite without glue No displacement during thermoforming No bubble formation at joints Reliable dimensional stability Advantages of Lunatec combi composite sheets Ready made multilayer material No gluing required between layers Faster and cleaner processing Consistent material quality Reduced production time Improved comfort for high risk patients Efficient insole manufacture Processing notes Thermoformable using standard EVA processing Suitable for vacuum forming and deep drawing Additional stabilising materials such as Norit, Lunacell, or Lunalight can be added if required Adapt pressure according to material flexibility nora® Lunatec combi T1 is ideal for orthopaedic shoe engineering and prosthetic orthotic workshops requiring a multilayer EVA composite with excellent damping, shear reduction, and stabilising support for the manufacture of high quality orthopaedic insoles and foot beddings for rheumatic, diabetic, and highly sensitive feet.

Read more less

nora® Lunatec combi cork 1 is a vulcanised composite expanded EVA sheet developed for the manufacture of durable orthopaedic insoles and foot beddings requiring a combination of resilient cushioning and strong stabilising support. The sheet combines a permanently resilient EVA cushioning layer with a high cork content stabilising layer, permanently fused during manufacturing to create a secure composite without the need for adhesive bonding. The stabilising layer contains a high proportion of cork, providing excellent rigidity and long term dimensional stability, making the material ideal for orthopaedic insoles that must withstand high mechanical stress. The upper cushioning layer made from nora® Lunalastik offers permanently resilient comfort together with a slightly roughened, velvety surface that is well suited for attaching leather covers or top layers. Because the layers are vulcanised together during production, the composite sheet provides consistent quality, clean processing, and reliable bonding without displacement, bubble formation, or hardening caused by adhesive films. Material construction Top cushioning layer Material: nora® Lunalastik Hardness: approx. 25 Shore A Density: approx. 0.23 g/cm³ Colour: 07 beige Thickness: approx. 6 mm Base stabilising layer with cork content Material: nora® Lunatec cork H Hardness: approx. 50 Shore A Density: approx. 0.35 g/cm³ Colour: 205 cork Thickness: approx. 8 mm Total thickness Approx. 14 mm Format Approx. 1120 x 880 mm // 44.1 x 34.6 inch Composite sheet Trimmed edges for precise processing Permanently vulcanised layers High cork fraction stabilising layer No adhesive between materials Uniform bonding during manufacture Intended applications Orthopaedic foot beddings Supporting insoles Insoles for flat feet, splay feet, hollow feet, and skew feet Stabilising orthopaedic insoles Insoles for high load applications Base material for orthopaedic shoe insoles Insoles with leather top covers Multilayer orthotic constructions Key properties Permanently resilient cushioning layer High stability cork reinforced base Excellent durability under load Very good dimensional stability Roughened surface suitable for leather covers Secure composite without glue No displacement during thermoforming No bubble formation at joints No hardening caused by adhesive film Advantages of Lunatec combi cork composite sheets Ready made multilayer material No gluing required between layers Efficient and clean processing High strength composite structure Ideal for durable insoles Time and cost savings in workshop production Processing notes Thermoformable using standard EVA processing methods Suitable for vacuum forming and deep drawing Additional stabilising materials such as Norit, Lunacell, or Lunalight can be added if required Adapt pressure according to material flexibility nora® Lunatec combi cork 1 is ideal for orthopaedic shoe engineering and prosthetic orthotic workshops requiring a strong, durable composite material with cork reinforced stability and permanently resilient cushioning for the manufacture of high quality orthopaedic foot beddings and supporting insoles.

Read more less

nora® Lunatec combi motion T2 is a three layer vulcanised expanded EVA composite sheet developed for the manufacture of orthopaedic insoles and foot beddings for painful, pressure sensitive, and high risk feet. The material combines an extremely soft bedding layer with resilient cushioning and a stabilising base, permanently fused during manufacturing to create a secure multilayer structure without the need for adhesive bonding. The upper layer made from nora® Lunatec motion provides very soft bedding properties and excellent absorption of shear forces during walking. This helps reduce stress on sensitive areas and improves comfort for patients with painful feet, rheumatic conditions, or diabetes. The lower layers provide permanent elasticity together with structural stability, ensuring that the finished insole maintains shape and support even under increased load. Because the three layers are vulcanised together during production, the composite sheet offers consistent quality, clean processing, and strong bonding without displacement, glue lines, or hardening caused by adhesive films. Material construction Top bedding layer Material: nora® Lunatec motion Hardness: approx. 12 Shore A Density: approx. 0.13 g/cm³ Colour: 56 stone grey Thickness: approx. 7 mm Middle cushioning layer Material: nora® Lunasoft Z Hardness: approx. 25 Shore A Density: approx. 0.16 g/cm³ Colour: 345 green Thickness: approx. 5 mm Base stabilising layer Material: nora® Lunatec CAD 35 Hardness: approx. 35 Shore A Density: approx. 0.20 g/cm³ Colour: 60 bright grey Thickness: approx. 8 mm Total thickness Approx. 20 mm Format Approx. 1000 x 625 mm // 39.4 x 31.5 inch Composite sheet Trimmed edges for accurate processing Three layer vulcanised construction No adhesive between layers Smooth transition between hardness levels Intended applications Thick orthopaedic foot beddings Soft bedding insoles Diabetes adapted insoles Insoles for painful feet Rheumatic foot support Insoles for orthopaedic footwear Pressure relief foot beddings Insoles for sensitive feet Multilayer orthotic constructions Key properties Extremely soft top layer for pressure relief Excellent absorption of shear forces Very good pressure distribution High comfort for sensitive and painful feet Integrated stabilising base Permanently elastic structure Secure composite without glue No displacement during forming High durability Lightweight construction Advantages of Lunatec combi motion composite sheets Ready made multilayer material No bonding required between layers Faster and cleaner production Consistent quality Reduced manufacturing time Ideal for deep drawing production Cost and time savings in workshop fabrication Processing notes Thermoformable using standard EVA processing Suitable for vacuum forming and deep drawing Can be processed without adhesive Adapt pressure according to material softness Recommended for single step forming of complete foot beddings nora® Lunatec combi motion T2 is ideal for orthopaedic shoe engineering, prosthetic and orthotic workshops, and diabetic foot care applications where maximum cushioning, shear reduction, and reliable structural support are required for the manufacture of high quality orthopaedic insoles and foot beddings.

Read more less

nora® Lunatec combi motion 1 is a vulcanised composite expanded EVA sheet designed for orthopaedic insoles and foot beddings requiring maximum cushioning together with reliable stabilising support. The material combines an extremely soft bedding layer with a firm stabilising base, permanently bonded during the manufacturing process without the need for adhesive. The upper layer of nora® Lunatec motion provides very soft bedding properties and excellent absorption of shear forces generated during walking. This helps reduce stress on the musculoskeletal system and can significantly improve comfort for patients with painful or sensitive feet. The stabilising base layer of nora® Lunasoft SL ensures that the insole maintains its shape and function even under increased load. Because the layers are vulcanised together during production, the composite sheet offers secure bonding, clean processing, and consistent quality without displacement, bubble formation, or hardening caused by adhesive films. Material construction Top bedding layer Material: nora® Lunatec motion Hardness: approx. 12 Shore A Density: approx. 0.13 g/cm³ Colour: 06 silk Thickness: approx. 6 mm Base stabilising layer Material: nora® Lunasoft SL Hardness: approx. 40 Shore A Density: approx. 0.20 g/cm³ Colour: 27 light blue Thickness: approx. 10 mm Composite sheet Trimmed edges for precise processing Permanently vulcanised layers No adhesive between materials Uniform bonding during manufacture Intended applications Orthopaedic insoles Diabetic insoles Insoles for rheumatic foot conditions Foot beddings for sensitive feet Cushioning insoles for painful joints Pressure relief insoles Shear reducing foot beddings Soft orthotic constructions Damping layers inside footwear Key properties Extremely soft bedding layer Excellent shear force absorption Reduces pressure and pain during walking High comfort for sensitive feet Integrated stabilising base layer Secure composite without glue No displacement during thermoforming No bubble formation at joints Reliable dimensional stability Advantages of Lunatec combi motion composite sheets Ready made multilayer material No gluing required between layers Efficient and clean processing Consistent material quality Improved comfort for high risk patients Time saving in workshop production Processing notes Thermoformable at approx. 110°C to 130°C (230°F to 266°F) Suitable for vacuum forming and deep drawing Additional EVA materials can be bonded if required Adapt pressure according to the softness of the material nora® Lunatec combi motion 1 is ideal for orthopaedic shoe engineering, prosthetic and orthotic workshops, and diabetic foot care applications where maximum cushioning, shear reduction, and reliable support are required for patients with pain sensitive, diabetic, geriatric, or rheumatic feet.

Read more less

nora® Lunatec combi 8 is a vulcanised composite expanded EVA sheet developed for the efficient production of sporty, durable, and stabilising orthopaedic insoles and foot beddings. The sheet combines two high performance nora® EVA materials that are permanently bonded together during the manufacturing process, ensuring secure strength without the need for adhesive bonding during fabrication. This composite combines the permanently resilient cushioning properties of nora® Lunatec EP with the strong stabilising support of nora® Lunatec SE. The result is a material that offers excellent elastic recovery, reliable structural stability, and high durability, making it ideal for modern orthotic insoles, sports insoles, and applications where both comfort and support are required. Because the layers are vulcanised together during production, the composite sheet provides consistent quality, clean processing, and reliable performance without the risk of layer displacement, bubble formation, or hardening caused by adhesive films. Material construction Top cushioning layer Material: nora® Lunatec EP Hardness: approx. 22 Shore A Density: approx. 0.20 g/cm³ Colour: 131 red Thickness: approx. 4 mm Base stabilising layer Material: nora® Lunatec SE Hardness: approx. 45 Shore A Density: approx. 0.28 g/cm³ Colour: 81 black Thickness: approx. 8 mm Composite sheet Trimmed edges for accurate processing Permanently vulcanised layers No adhesive between materials Uniform bonding during manufacture Intended applications Sport insoles Long sole orthotic insoles Foot beddings with high resilience Stabilising orthopaedic insoles Insoles for active use Orthotic footwear insoles Functional orthotic constructions Cushioning and support layers in orthoses High stress insole applications Key properties Permanently resilient cushioning Integrated stabilising layer Excellent elastic recovery High durability under load Secure composite without glue No displacement during thermoforming No bubble formation at joints No hardening caused by adhesive film Reliable dimensional stability Advantages of Lunatec combi composite sheets No gluing required between layers Faster and cleaner production Reduced processing steps Consistent material quality High retention of volume during forming Efficient insole manufacture Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) Suitable for vacuum forming and deep drawing Additional EVA materials can be bonded if required Adapt pressure according to material flexibility nora® Lunatec combi 8 is ideal for orthopaedic shoe engineering and prosthetic orthotic workshops requiring a composite EVA sheet that combines high resilience cushioning with strong stabilising support for modern sports insoles, durable orthotic devices, and high performance foot beddings.

Read more less

nora® Lunatec combi 7 is a vulcanised composite expanded EVA sheet designed for the efficient manufacture of orthopaedic insoles, foot beddings, and soft orthotic components requiring a combination of cushioning comfort and structural stability. The sheet combines two proven nora® EVA materials that are permanently bonded during the manufacturing process, creating a secure composite without the need for adhesive during fabrication. This combination uses nora® Lunasoft SLW as a permanently resilient cushioning layer together with nora® Lunasoft SL as a stabilising layer. The result is a composite sheet that provides soft bedding, reliable support, and excellent durability, making it suitable for orthopaedic, prosthetic, and rehabilitation applications, especially for diabetic, geriatric, and rheumatic foot management. Because the layers are vulcanised together during production, the material offers consistent strength, clean processing, and reliable performance without displacement, bubble formation, or hardening caused by adhesive films. Material construction Top cushioning layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 07 beige Thickness: approx. 3 mm Base stabilising layer Material: nora® Lunasoft SL Hardness: approx. 40 Shore A Density: approx. 0.20 g/cm³ Colour: 19 stone Thickness: approx. 4 mm Composite sheet Trimmed edges for accurate processing Permanently vulcanised layers No adhesive between materials Uniform material bonding during manufacture Intended applications Orthopaedic insoles Foot beddings Diabetic insoles Geriatric foot support Rheumatic foot management Soft wall funnel shaped sleeves Soft prosthetic sockets Cushioning and stabilising orthotic layers Multilayer orthotic constructions Key properties Permanently resilient cushioning layer Integrated stabilising support layer High durability under load Good elastic recovery Secure composite without glue No displacement during thermoforming No bubble formation at joints No hardening caused by adhesive film Reliable volume retention during forming Advantages of Lunatec combi composite sheets No gluing required between layers Faster and cleaner production Reduced processing steps Consistent material quality Improved dimensional stability Efficient insole manufacture Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) Suitable for vacuum forming and deep drawing Additional EVA materials can be bonded if required Adapt pressure according to material flexibility nora® Lunatec combi 7 is ideal for orthopaedic shoe engineering and prosthetic orthotic workshops requiring a ready made composite EVA sheet that combines cushioning comfort with reliable stabilising support for efficient, high quality insole and orthotic production.

Read more less

nora® Lunatec combi 6 is a vulcanised composite expanded EVA sheet developed for the production of sporty, durable, and stabilising orthopaedic insoles and foot beddings. The sheet combines two proven nora® EVA materials that are permanently bonded during the manufacturing process, creating a strong composite without the need for adhesive bonding during fabrication. This material combines the permanently resilient cushioning properties of nora® Lunasoft SLW with the stabilising strength of nora® Lunasoft AL. The result is a composite sheet that provides excellent comfort together with reliable support, making it ideal for modern insoles, sports orthotics, and applications where both flexibility and structural stability are required. Because the layers are vulcanised together during production, the composite sheet ensures consistent strength, clean processing, and reliable performance without the risk of layer displacement, bubble formation, or hardening caused by adhesive films. Material construction Top cushioning layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 137 terra Thickness: approx. 4 mm Base stabilising layer Material: nora® Lunasoft AL Hardness: approx. 52 Shore A Density: approx. 0.26 g/cm³ Colour: 81 black Thickness: approx. 10 mm Composite sheet Trimmed edges for accurate processing Permanently vulcanised layers No adhesive between materials Intended applications Sporty orthopaedic insoles Long sole sports insoles Foot beddings for active use Stabilising orthotic insoles Insoles requiring cushioning and support Orthopaedic footwear insoles Functional orthotic constructions High stress insole applications Key properties Permanently resilient cushioning Integrated stabilising layer Excellent durability under load Good elastic recovery Composite sheet vulcanised during manufacture No adhesive required between layers No displacement during thermoforming No bubble formation at joints No hardening caused by glue film Suitable for modern sporty orthotic designs Advantages of Lunatec combi composite sheets Efficient insole manufacture Reduced processing steps Consistent material quality Secure bonding without glue Improved dimensional stability Clean thermoforming Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) No bonding required between composite layers Additional EVA materials can be bonded if required Suitable for vacuum forming and deep drawing nora® Lunatec combi 6 is ideal for orthopaedic shoe engineering and orthotic workshops requiring a composite material that combines cushioning comfort with strong stabilising support, making it suitable for sports insoles, modern foot beddings, and high performance orthotic applications.

Read more less

nora® Lunatec combi 5 is a vulcanised composite expanded EVA sheet developed for the production of thin, permanently resilient orthopaedic insoles and cushioning components. The sheet combines two proven nora® EVA materials that are permanently bonded during the manufacturing process, creating a stable composite without the need for adhesive bonding during fabrication. This material combines the durable cushioning properties of nora® Lunalastik with the resilient support of nora® Lunasoft SLW, resulting in a lightweight composite sheet that offers excellent comfort, reliable shock absorption, and long-term elasticity even in thin constructions. The combination is especially suitable for insoles that require high flexibility together with permanent resilience. Because the layers are vulcanised together during production, the composite sheet provides consistent strength, clean processing, and reliable performance without the risk of layer displacement, bubble formation, or hardening caused by adhesive films. Material construction Top cushioning layer Material: nora® Lunalastik Hardness: approx. 25 Shore A Density: approx. 0.23 g/cm³ Colour: 60 bright grey Thickness: approx. 3 mm Base cushioning layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 111 royal blue Thickness: approx. 4 mm Composite sheet Trimmed edges for accurate processing Permanently vulcanised layers No adhesive between materials Intended applications Thin orthopaedic insoles Long sole insoles with soft forefoot bedding Cushioning layers for orthoses Cushioning components for prostheses Soft prosthetic sockets Comfort insoles for sensitive feet Flexible orthotic constructions Lightweight orthopaedic footwear insoles Key properties Permanently resilient cushioning Excellent comfort in thin constructions Good shock absorption High elastic recovery Composite sheet vulcanised during manufacture No adhesive required between layers No displacement during thermoforming No bubble formation at joints No hardening caused by glue film Suitable for precise orthotic work Advantages of Lunatec combi composite sheets Efficient insole production Reduced processing steps Consistent material quality Reliable bonding without glue Improved dimensional stability Clean thermoforming Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) No bonding required between composite layers Additional EVA materials can be bonded if required Suitable for vacuum forming and deep drawing nora® Lunatec combi 5 is ideal for orthopaedic shoe engineering and orthotic workshops requiring a thin, permanently resilient composite material for insoles, orthoses, prosthetic cushioning, and soft socket applications where comfort, flexibility, and durability are essential.

Read more less

nora® Lunatec combi 4 is a vulcanised composite expanded EVA sheet developed for orthopaedic insoles and foot beddings requiring soft bedding comfort together with permanently resilient cushioning. The sheet combines two proven nora® EVA materials that are permanently bonded during the manufacturing process, creating a stable composite without the need for adhesive bonding during fabrication. This combination integrates the soft bedding properties of nora® Lunairflex with the durable cushioning performance of nora® Lunalastik. The result is a composite material designed for sensitive feet exposed to higher mechanical stress, providing excellent pressure distribution, reliable resilience, and long-term comfort. The material is especially suitable for diabetic, geriatric, and rheumatic foot care, where both cushioning and structural support are required. Because the layers are vulcanised together during production, the composite sheet ensures consistent strength, clean processing, and reliable performance without the risk of layer displacement, bubble formation, or hardening caused by adhesive films. Material construction Top bedding layer Material: nora® Lunairflex Hardness: approx. 22 Shore A Density: approx. 0.12 g/cm³ Colour: 07 beige Thickness: approx. 3 mm Base cushioning layer Material: nora® Lunalastik Hardness: approx. 25 Shore A Density: approx. 0.23 g/cm³ Colour: 09 white Thickness: approx. 6 mm Composite sheet Trimmed edges for accurate processing Permanently vulcanised layers No adhesive between materials Intended applications Base material for orthopaedic foot beddings Diabetes adapted insoles Insoles for sensitive feet Geriatric foot orthotics Rheumatic foot conditions Increased stress orthotic applications Cushioning insoles with resilient support Custom orthopaedic footwear insoles Recommended combinationsFor higher stability, the use of an additional stabilising layer such as nora® Lunasoft AL nora® Lunalight A nora® Lunacellis recommended depending on diagnosis, patient weight, and load requirements. Key properties Soft bedding with resilient cushioning Excellent pressure distribution Permanently bonded composite sheet No adhesive required between layers No displacement during thermoforming No bubble formation at joints No hardening caused by glue film High walking comfort Suitable for high stress applications Reliable durability Advantages of Lunatec combi composite sheets Faster fabrication Reduced processing steps Consistent material quality Secure bonding without glue Improved dimensional stability Clean thermoforming Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) No bonding required between composite layers Additional EVA materials can be bonded if required Suitable for vacuum forming and deep drawing nora® Lunatec combi 4 is an ideal composite material for orthopaedic shoe engineering and orthotic workshops requiring a soft but durable base for diabetic, geriatric, and rheumatic foot beddings, combining excellent bedding comfort with permanently resilient cushioning for higher load applications.

Read more less

nora® Lunatec combi 3 is a vulcanised composite expanded EVA sheet designed for the manufacture of orthopaedic insoles and foot beddings requiring durable cushioning, stability, and long-term resilience. The material combines two proven nora® EVA qualities that are permanently bonded during the manufacturing process, creating a reliable composite sheet without the need for adhesive bonding during fabrication. This combination integrates the permanently resilient cushioning properties of nora® Lunalastik with the supportive and durable characteristics of nora® Lunasoft SLW. The result is a composite material that offers excellent pressure distribution together with stable support, making it particularly suitable for diabetic, geriatric, and rheumatic foot care where both comfort and durability are required. Because the layers are vulcanised together during production, the composite sheet ensures consistent strength, clean processing, and reliable performance without the risk of layer displacement, bubble formation, or hardening caused by adhesive films. Material construction Top cushioning layer Material: nora® Lunalastik Hardness: approx. 25 Shore A Density: approx. 0.23 g/cm³ Colour: 07 beige Thickness: approx. 6 mm Base cushioning and stabilising layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 19 stone Thickness: approx. 10 mm Composite sheet Trimmed edges for accurate processing Permanently vulcanised layers No adhesive between materials Intended applications Base material for orthopaedic foot beddings Diabetes adapted insoles Insoles for sensitive feet Geriatric foot orthotics Rheumatic foot conditions Medium stress orthotic applications Cushioning insoles with stabilising support Custom orthopaedic footwear insoles Key properties Permanently resilient cushioning Good stability under load Excellent pressure distribution Composite sheet vulcanised during manufacture No adhesive required between layers No displacement during thermoforming No bubbles at material joints No hardening caused by glue film High walking comfort Reliable durability Advantages of Lunatec combi composite sheets Faster insole fabrication Reduced processing steps Consistent material quality Secure bonding without glue Improved dimensional stability Clean thermoforming Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) No bonding required between composite layers Additional EVA materials can be bonded if required Suitable for vacuum forming and deep drawing nora® Lunatec combi 3 is ideal for orthopaedic shoe engineering and orthotic workshops requiring a durable composite base material for diabetic, geriatric, and rheumatic foot beddings, providing permanently resilient cushioning together with reliable support for medium load applications.

Read more less

nora® Lunatec combi 2 is a vulcanised composite expanded EVA sheet designed for the manufacture of orthopaedic insoles and foot beddings requiring high cushioning, stability, and long-term resilience. The sheet combines two proven nora® materials that are permanently bonded during the manufacturing process, creating a reliable composite without the need for adhesive bonding during fabrication. This combination integrates the soft bedding properties of nora® Lunairflex with the permanently resilient cushioning of nora® Lunasoft SLW. The result is a composite material that offers excellent pressure distribution together with durable support, making it particularly suitable for sensitive feet and medical orthotic applications. Because the materials are vulcanised together at production stage, the composite sheet provides consistent strength, stable processing, and reliable performance without the risk of layer separation, bubbles, or hardening caused by adhesives. Material construction Top bedding layer Material: nora® Lunairflex Hardness: approx. 22 Shore A Density: approx. 0.12 g/cm³ Colour: 07 beige Thickness: approx. 6 mm Base cushioning layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 17 grey beige Thickness: approx. 10 mm Trimmed composite sheet Edges trimmed for accurate processing Permanently vulcanised layers No adhesive between materials Intended applications Base material for orthopaedic foot beddings Diabetes adapted insoles Insoles for sensitive feet Geriatric foot orthotics Rheumatic foot conditions Moderate stress orthotic applications Cushioning insoles with stabilising support Custom orthopaedic footwear insoles Key properties Soft bedding with resilient support Excellent pressure distribution Permanently bonded composite sheet No adhesive required between layers No displacement during thermoforming No bubble formation at joints No hardening caused by glue film High walking comfort Good durability under load Suitable for medical orthotic use Advantages of Lunatec combi composite sheets Faster fabrication Reduced processing steps Consistent material quality Reliable bonding without glue Improved dimensional stability Clean thermoforming Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) No bonding required between composite layers Additional EVA materials can be bonded if needed Suitable for vacuum forming and deep drawing nora® Lunatec combi 2 is an ideal composite material for orthopaedic shoe engineering and orthotic workshops requiring a soft but stable base for diabetic, geriatric, and sensitive foot applications, combining excellent bedding comfort with permanently resilient support.

Read more less

nora® Lunatec combi 1 is a vulcanised composite expanded EVA sheet designed as a ready-to-use base material for orthopaedic insoles and foot beddings. The material combines proven nora® qualities that are permanently bonded during the manufacturing process, creating a stable and resilient composite sheet without the need for adhesive bonding. The integrated cushioning layer made from nora® Lunalastik provides permanently resilient support with excellent shock absorption and stabilising function. This makes Lunatec combi 1 especially suitable for insoles exposed to higher mechanical stress, while still maintaining high walking comfort and long-term durability. Because the layers are vulcanised together during production, the composite sheet offers consistent structure, reliable strength, and easier processing compared with glued materials. The material can be thermoformed directly without risk of layer displacement, bubble formation, or hardening caused by adhesive films. Material construction Cushioning and stabilising layer Material: nora® Lunalastik Hardness: approx. 25 Shore A Density: approx. 0.23 g/cm³ Colour: 07 beige Thickness: approx. 6 mm Formats Composite sheet with trimmed edges for accurate processing Intended applications Base layer for orthopaedic foot beddings Insoles for orthopaedic footwear Cushioning and stabilising insole constructions Insoles for geriatric patients Diabetic foot orthotics Rheumatic foot conditions Sports insoles with resilient support High stress orthotic applications Key properties Permanently resilient cushioning Stabilising function under load High durability and elastic recovery Composite sheet vulcanised during manufacture No adhesive required between layers No displacement during thermoforming No bubbles at material joints No hardening caused by glue film Consistent material quality Suitable for high load insoles Advantages of Lunatec combi composite sheets Faster insole production Reduced processing steps No gluing required Improved dimensional stability Higher volume retention during forming Clean and reliable thermoforming Time and cost savings in workshop production Processing notes Thermoformable at approx. 120°C to 130°C (248°F to 266°F) No bonding required between composite layers Additional EVA materials can be bonded if required Suitable for vacuum forming and deep drawing nora® Lunatec combi 1 is an ideal composite material for orthopaedic shoe engineering and orthotic workshops requiring a reliable, permanently resilient base for foot beddings and insoles, with efficient processing and consistent performance in everyday clinical use.

Read more less

nora® Lunatec combiCAD 2 is a multilayer expanded EVA milling sheet designed for CAD CAM fabrication in orthotics, prosthetics, and orthopaedic footwear production. This composite material combines three different EVA qualities that are vulcanised together during the manufacturing process, creating a strong and reliable milling blank without the need for adhesive bonding between layers. The combiCAD construction provides excellent milling behaviour together with optimised functional properties. Because the layers are permanently fused during production, the material offers consistent structure, high strength, and clean machining without irregularities caused by glue layers. This results in improved durability, better surface quality, and reliable mechanical performance in finished orthotic devices. Material construction Top stabilising layer Material: stabilising EVA layer Colour: 81 black Thickness: approx. 3 mm Middle cushioning layer Material: nora® Lunasoft Z Hardness: approx. 25 Shore A Density: approx. 0.16 g/cm³ Colour: 131 red Thickness: approx. 7 mm Base milling layer Material: nora® Lunatec CAD 35 Hardness: approx. 35 Shore A Density: approx. 0.17 g/cm³ Colour: 70 yellow Thickness: approx. 25 mm Total thickness approx. 35 mm Formats approx. 1120 × 750 mm (44.1 inch × 29.5 inch) approx. 1500 × 1120 mm (59 inch × 44.1 inch) Intended applications CAD CAM milled foot orthotics Composite orthotic blanks Functional footbeds with integrated cushioning Orthopaedic footwear components Structural and comfort combination insoles Digital orthotic production Central fabrication workflows High performance orthotic builds Key properties Composite EVA sheet vulcanised during manufacture No adhesive layers between materials Excellent milling behaviour Clean cutting with smooth surface finish High tensile strength and elongation Consistent material structure No irregularities from glue layers Strong internal bonding Reliable replication in CAD CAM production Optimised combination of cushioning and stability Advantages of combiCAD construction Stronger than bonded multilayer sheets No risk of delamination Improved machining accuracy Reduced production time Consistent quality in automated milling Durable finished orthoses Ideal for central fabrication and digital workflows Processing notes Designed for CNC and CAD CAM milling machines No bonding required between internal layers Can be bonded to other EVA materials using standard adhesives Use correct tool speed and feed for best surface finish nora® Lunatec combiCAD 2 is an ideal composite milling material for orthotic, prosthetic, and orthopaedic footwear workshops requiring a multilayer EVA blank with excellent machining performance, integrated cushioning, and reliable structural stability for modern CAD CAM fabrication.

Read more less

nora® Lunatec combiCAD 1 is an advanced multilayer expanded EVA milling sheet developed for CAD CAM fabrication in orthotics, prosthetics, and orthopaedic footwear production. This innovative composite material combines three different EVA qualities vulcanised together during the manufacturing process, creating a stable, high performance milling blank without the need for adhesive bonding between layers. The combiCAD construction is designed to combine the excellent milling behaviour of nora® Lunatec CAD materials with the functional advantages of vulcanised composite sheets. Because the layers are permanently fused during production, the material provides superior strength, consistent structure, and clean machining without irregularities caused by glue layers. This results in improved durability, better surface quality, and reliable mechanical performance in finished orthotic devices. Material construction Top stabilising layer Material: stabilising EVA layer Colour: 80 anthracite Thickness: approx. 2 mm Middle cushioning layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 137 terra Thickness: approx. 6 mm Base milling layer Material: nora® Lunatec CAD 45 Hardness: approx. 45 Shore A Density: approx. 0.22 g/cm³ Colour: 56 stone grey Thickness options: approx. 24 mm or approx. 32 mm Formats approx. 1120 × 740 mm (44.1 inch × 29.1 inch) approx. 1480 × 1120 mm (58.2 inch × 44.0 inch) Intended applications CAD CAM milled foot orthotics Composite orthotic blanks Functional footbeds with integrated cushioning Orthopaedic footwear components Structural and comfort combination insoles Central fabrication workflows Digital orthotic production High performance orthotic builds Key properties Composite EVA sheet vulcanised during manufacture No adhesive layers between materials Excellent milling behaviour Clean cutting with smooth surface finish High tensile strength and elongation values Consistent material structure No irregularities caused by glue layers Stable bonding between layers Optimised functional performance Reliable replication in CAD CAM production Advantages of combiCAD construction Stronger than bonded multilayer sheets No risk of layer separation Improved machining accuracy Better durability in finished orthoses Reduced production time Consistent quality in automated milling Ideal for central fabrication Processing notes Designed for CNC and CAD CAM milling machines No additional bonding required between layers Can be bonded to other EVA materials using standard adhesives Use appropriate tool speed and feed for best results nora® Lunatec combiCAD 1 is an ideal composite milling material for orthotic, prosthetic, and orthopaedic footwear workshops requiring a high quality multilayer EVA blank with excellent machining properties, strong internal bonding, and reliable performance in modern CAD CAM production systems.

Read more less

nora® Lunatec CAD 25 is a soft expanded EVA sheet developed for CAD CAM milling applications where high cushioning performance and precise machining are required. With a hardness of approximately 25 Shore A and a density of around 0.12 g/cm³, this material provides excellent comfort, flexibility, and elastic recovery while maintaining sufficient stability for accurate CNC milling. It is ideal for soft orthotic insoles, comfort footbeds, and lightweight orthopaedic footwear components produced using digital workflows. The uniform closed cell structure ensures clean cutting, smooth surface finish, and minimal tearing during machining. Trimmed edges allow accurate positioning in milling machines, making Lunatec CAD 25 suitable for both in clinic production and central fabrication environments. Material specification Hardness: approx. 25 Shore A Density: approx. 0.12 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1150 × 750 mm (45.3 inch × 29.5 inch) approx. 1500 × 1150 mm (59.0 inch × 45.3 inch) Colour and thickness 07 beige — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Soft milling blanks for insoles Comfort footbeds Cushioning orthotic components Orthopaedic footwear midsoles Lightweight orthotic constructions Prosthetic and orthotic build ups Digital orthotic production workflows Key properties Soft EVA with good machining stability Excellent cushioning and comfort Clean milling with smooth finish Uniform material structure Reduced tearing during machining Lightweight and flexible Suitable for thick milling blanks Hygienic closed cell material Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use correct tool speed and feed to achieve best surface quality nora® Lunatec CAD 25 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft milling EVA that combines high comfort, reliable machining performance, and consistent quality for modern CAD CAM fabrication.

Read more less

nora® Lunatec CAD 30 is a soft expanded EVA sheet designed for CAD CAM milling applications where cushioning, flexibility, and precision machining are required. With a hardness of approximately 30 Shore A and a density of around 0.15 g/cm³, this material provides excellent comfort properties while maintaining sufficient stability for accurate CNC machining. It is well suited for milled orthotic insoles, comfort footbeds, and lightweight orthopaedic footwear components. The uniform closed cell structure allows smooth cutting with minimal tearing, producing clean edges and consistent surface quality. Trimmed edges ensure accurate alignment in milling machines, making the material ideal for both in clinic and central fabrication digital workflows. Material specification Hardness: approx. 30 Shore A Density: approx. 0.15 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1100 × 700 mm (43.3 inch × 27.5 inch) approx. 1400 × 1100 mm (55.0 inch × 43.3 inch) Colour and thickness 80 anthracite — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Cushioning orthotic components Soft footbeds and comfort insoles Orthopaedic footwear midsoles Prosthetic and orthotic build ups Custom footbeds produced by CNC milling Digital orthotic production workflows Key properties Soft EVA with good machining stability Excellent cushioning performance Clean milling with smooth finish Uniform material structure Reduced tearing during cutting Lightweight with good elasticity Suitable for thick milling blanks Hygienic closed cell material Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use correct tool speed and feed to achieve optimal surface finish nora® Lunatec CAD 30 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft milling EVA that combines comfort, precision machining, and consistent quality in modern CAD CAM fabrication systems.

Read more less

nora® Lunatec CAD 35 is a medium soft expanded EVA sheet developed for CAD CAM milling in orthotics, prosthetics, and orthopaedic footwear fabrication. With a hardness of approximately 35 Shore A and a density of around 0.20 g/cm³, this material offers a combination of flexibility, cushioning, and dimensional stability, making it ideal for milled insoles, orthotic blanks, and comfort focused components. The material features a uniform closed cell structure that allows clean machining with smooth surface finish and minimal tearing. Trimmed edges ensure accurate positioning in CNC and CAD CAM milling systems, supporting consistent results in both in clinic and central fabrication workflows. Material specification Hardness: approx. 35 Shore A Density: approx. 0.20 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1160 × 770 mm (45.6 inch × 30.3 inch) approx. 1540 × 1160 mm (60.6 inch × 45.6 inch) Colour and thickness 60 bright grey — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Cushioning orthotic components Orthopaedic footwear midsoles Prosthetic and orthotic build ups Custom footbeds produced by CNC milling Digital orthotic workflows Central fabrication production Key properties Smooth and clean milling performance Good flexibility with reliable stability Excellent cushioning characteristics Uniform material structure Reduced tearing during machining Suitable for thick milling blanks Consistent results in automated production Hygienic closed cell EVA Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use appropriate tool speed and feed to achieve best surface finish nora® Lunatec CAD 35 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a softer milling EVA with good comfort, reliable machining quality, and consistent performance in modern CAD CAM production systems.

Read more less

nora® Lunatec CAD 45 is a precision expanded EVA sheet developed for CAD CAM milling in orthotics, prosthetics, and orthopaedic footwear production. With a hardness of approximately 45 Shore A and a density of around 0.22 g/cm³, this material provides an excellent balance of stability, elasticity, and machining performance, making it ideal for milled orthotic blanks, insoles, and structural footwear components. The uniform closed cell structure allows clean milling with smooth surface finish and minimal tearing, while the trimmed edges ensure accurate positioning and reliable clamping in CNC and CAD CAM systems. Lunatec CAD 45 is particularly suited for workshops and central fabrication facilities requiring consistent quality in digital production workflows. Material specification Hardness: approx. 45 Shore A Density: approx. 0.22 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1080 × 710 mm (42.5 inch × 27.9 inch) approx. 1420 × 1080 mm (55.8 inch × 42.5 inch) Colour and thickness 09 white — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Orthopaedic footwear components Prosthetic and orthotic build ups Custom footbeds produced by CNC milling Structural midsole elements Central fabrication production Digital orthotic workflows Key properties Excellent milling behaviour Clean cutting with smooth finish Good dimensional stability Balanced firmness and flexibility Uniform material structure Reliable strength for orthotic builds Suitable for thick milling blanks Hygienic closed cell EVA Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use appropriate tool speed and feed for optimal finish nora® Lunatec CAD 45 is an ideal EVA milling material for orthotic, prosthetic, and orthopaedic footwear workshops requiring consistent machining quality, reliable strength, and efficient production in modern CAD CAM fabrication systems.

Read more less

nora® Lunatec CAD 55 is a high stability expanded EVA sheet developed specifically for CAD CAM milling applications in orthotics, prosthetics, and orthopaedic footwear production. With a hardness of approximately 55 Shore A and a density of around 0.30 g/cm³, this material provides excellent dimensional stability, clean machining performance, and reliable structural strength, making it ideal for precision milled orthotic components. The material is supplied with trimmed edges for accurate positioning in milling machines and consistent block alignment. Lunatec CAD 55 offers a uniform cell structure that allows smooth cutting, minimal tearing, and high surface quality, ensuring efficient production in both central fabrication and in clinic CAD CAM workflows. Material specification Hardness: approx. 55 Shore A Density: approx. 0.30 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1000 × 650 mm (39.3 inch × 25.6 inch) approx. 1300 × 1000 mm (51.1 inch × 39.3 inch) Colour and thickness 318 ice blue — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Orthopaedic footwear components Prosthetic and orthotic build ups Structural midsole elements Custom footbeds produced by CNC milling Central fabrication workflows Key properties Excellent milling performance Clean cutting with minimal tearing High dimensional stability Uniform material structure Reliable strength and durability Suitable for thick milling blanks Consistent results in automated production Closed cell hygienic material Processing notes Designed for CNC and CAD CAM milling systems Can be bonded using standard EVA adhesives Suitable for multilayer constructions after milling Ensure correct tool speed and feed for optimal surface finish nora® Lunatec CAD 55 is an ideal milling material for orthotic, prosthetic, and orthopaedic footwear workshops using digital production workflows, providing precise machining, reliable strength, and consistent quality for high performance custom devices.

Read more less

nora® Lunalastik is a resilient expanded EVA sheet designed for cushioning applications where good shock absorption, durability, and reliable elastic recovery are required. With a hardness of approximately 25 Shore A and a density of around 0.20 g/cm³, this material provides a balanced combination of softness and strength, making it suitable for orthotic insoles, foot beddings, and cushioning elements in orthopaedic footwear. Lunalastik offers excellent restoration capability after repeated loading, ensuring long term comfort and performance. The closed cell structure makes the material hygienic, washable, and resistant to moisture, while its high tear resistance allows reliable use in both manual and CAD CAM fabrication. Smooth and perforated versions are available to support multilayer constructions and improved bonding. Material specification Hardness: approx. 25 Shore A Density: approx. 0.20 g/cm³ Surface: smooth or perforated Sheet format: approx. 1150 × 750 mm (45.3 inch × 29.5 inch) Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: suitable for polychloroprene and standard EVA adhesives Structure: closed cell expanded EVA Available versions Smooth 07 beige — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 27 light blue — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm 81 black — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm 70 yellow — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm Perforated 07 beige — 3 mm, 6 mm Intended applications Cushioning sheets for orthopaedic insoles Soft bedding layers in custom made shoes Cushioning in ready made footwear Foot beddings and orthotic insoles Cushioning support for calcaneal spur Shock absorbing layers in footwear Comfort layers in orthoses Sandwich constructions in orthotic devices Key properties Excellent cushioning performance High elastic recovery Durable under repeated load Excellent tear resistance Comfortable walking properties Hygienic closed cell structure Washable and moisture resistant Easy to bond Suitable for multilayer constructions Processing notes Easy bonding using polychloroprene or standard EVA adhesives Adapt contact pressure according to material flexibility Thermoform at 110°C to 130°C (230°F to 266°F) Avoid excessive pressure to maintain cushioning properties nora® Lunalastik is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a durable cushioning EVA material with good resilience, strong tear resistance, and reliable comfort for insoles, foot beddings, and therapeutic footwear applications.

Read more less

nora® Lunairflex is a lightweight expanded EVA sheet designed for applications requiring soft cushioning with improved stability for medium load conditions. With a hardness of approximately 22 Shore A and a density of around 0.12 g/cm³, Lunairflex provides excellent resilience, good elastic recovery, and reliable comfort while offering more support than very soft EVA grades. It is well suited for inner shoe cushioning, orthotic insoles, and shaping elements where a balance between softness and durability is required. The closed cell structure makes the material hygienic, washable, and resistant to moisture, ensuring long lasting performance in clinical and workshop environments. Lunairflex is available in smooth and perforated versions, allowing flexibility in multilayer constructions and improved bonding where required. Material specification Hardness: approx. 22 Shore A Density: approx. 0.12 g/cm³ Surface: smooth or perforated Sheet format: approx. 1200 × 750 mm (47.2 inch × 29.5 inch) Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Structure: closed cell expanded EVA Available versions Smooth 07 beige — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 24 mm 27 light blue — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm Perforated 07 beige — 3 mm, 6 mm Intended applications Cushioning sheets for inner shoes Foot orthotics and insoles Shock absorbing layers in footwear Shaping elements for medium load applications such as calf prostheses Upper material for interim, therapy, and bathing shoes Bedding and damping layers in inner shoes Sandwich type orthotic constructions Soft lining material in orthoses Key properties Very low density EVA Soft with good stability Highly resilient with good recovery Comfortable walking properties Good shock absorption Hygienic closed cell structure Washable and durable Suitable for medium stress applications Ideal for multilayer constructions Processing notes Use standard EVA bonding methods Adapt contact pressure to the flexibility of the material Avoid excessive horizontal deformation during forming Thermoform at 110°C to 130°C (230°F to 266°F) nora® Lunairflex is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft but stable EVA material for cushioning, bedding, and medium load applications in insoles, orthoses, and therapeutic footwear.

Read more less

nora® Lunairmed is an ultra lightweight expanded EVA sheet designed for applications requiring maximum cushioning, very low weight, and high walking comfort. With a hardness of approximately 16 Shore A and a density of around 0.08 g/cm³, Lunairmed provides excellent resilience and shock absorption while remaining extremely soft and flexible. The material is ideal for inner shoe cushioning, foot beddings, and orthotic constructions where comfort and pressure relief are essential. Thanks to its closed cell structure, Lunairmed is hygienic, washable, and resistant to moisture, making it suitable for long term clinical use and for patients with sensitive or high risk feet. The material is available in smooth and perforated versions, allowing optimal bonding and flexibility in multilayer orthotic designs. Material specification Hardness: approx. 16 Shore A Density: approx. 0.08 g/cm³ Surface: smooth or perforated Sheet format: approx. 1080 × 825 mm (42.5 inch × 32.4 inch) Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Structure: closed cell expanded EVA Available versions Smooth 07 beige — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 24 mm 80 anthracite — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm 27 light blue — 2 mm, 3 mm, 4 mm, 6 mm Perforated 07 beige — 3 mm, 6 mm Intended applications Cushioning sheets for inner shoes Foot orthotics and foot beddings Shock absorbing layers in insoles Sandwich type insole constructions Pressure relief for diabetic and rheumatic feet Upper material for interim and therapy shoes Bathing and rehabilitation footwear Low stress shaping elements such as calf prostheses Soft lining material in orthoses Key properties Very low density EVA Extremely soft and flexible High resilience and elastic recovery Excellent walking comfort Good shock absorption Hygienic closed cell structure Washable and durable Suitable for sensitive and diabetic feet Ideal for multilayer constructions Processing notes Use standard EVA bonding methods Adapt contact pressure to the flexibility of the material Avoid excessive horizontal deformation during forming Thermoform at 110°C to 130°C (230°F to 266°F) nora® Lunairmed is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a very soft, lightweight EVA material for cushioning, pressure relief, and high comfort applications, especially in diabetic care, rheumatic conditions, and sandwich type insole constructions.

Read more less

nora® Lunatec Motion 20 is a soft expanded EVA sheet designed for orthotic and orthopaedic applications requiring effective cushioning, pressure relief, and resistance to shear forces. With a hardness of approximately 20 Shore A and a density of around 0.18 g/cm³, this material provides excellent bedding properties while offering greater stability than ultra soft EVA grades. It is particularly suitable for patients requiring high levels of comfort together with reliable support, including heavier users and those with sensitive or painful feet. The material absorbs both vertical and horizontal load, helping to minimise shear forces that can cause irritation, pain, or skin damage. Its closed cell structure makes it hygienic, durable, and washable, making it ideal for long term clinical use. Material specification Hardness: approx. 20 Shore A Density: approx. 0.18 g/cm³ Surface: smooth Edges: trimmed for accurate processing Sheet format: approx. 830 × 615 mm (32.6 inch × 24.2 inch) Colour: 382 white Thicknesses: 2 mm, 3 mm, 4 mm, 6 mm, 8 mm Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Intended applications Foot orthotics and insoles Cushioning layers in inner shoes Top cover layers for orthotic devices Pressure relief for sensitive feet Diabetic and neuropathic foot care Patients over 100 kg requiring additional support Rheumatoid and painful joint conditions Cushioning in classic orthoses Functional lining for support orthoses and corsets Protection of pressure sensitive areas Key properties Soft bedding with good stability Absorbs shear forces effectively Excellent damping in the horizontal load plane Helps reduce pain during walking Suitable for high body weight patients Closed cell hygienic structure Durable and washable Comfortable and flexible Processing notes Use standard EVA bonding methods Adjust contact pressure according to material flexibility Thermoform at 110°C to 130°C (230°F to 266°F) Avoid excessive pressure to maintain cushioning performance nora® Lunatec Motion 20 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft but stable EVA material for pressure relief, diabetic care, and high comfort orthotic constructions.

Read more less

nora® Lunatec Motion A12 is an ultra soft expanded EVA sheet developed for applications requiring maximum cushioning, pressure relief, and shear force reduction. With a hardness of approximately 12 Shore A and a density of around 0.13 g/cm³, this material provides exceptional bedding and damping properties, making it ideal for sensitive feet, painful joints, and high risk patients. The material is designed to absorb horizontal shear forces as well as vertical load, helping to reduce pain and improve comfort with every step. Its closed cell structure ensures durability, hygiene, and easy cleaning, while maintaining excellent flexibility and long term performance. Lunatec Motion A12 is widely used as a top layer, cushioning insert, or lining material in orthotic and orthopaedic applications. Material specification Hardness: approx. 12 Shore A Density: approx. 0.13 g/cm³ Surface: smooth Edges: trimmed for clean processing Structure: closed cell expanded EVA Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Available formats Format 1100 × 700 mm (43.3 inch × 27.5 inch) Colours: 06 silk, 56 stone grey Format 1400 × 1100 mm (55.0 inch × 43.3 inch) Colour: 06 silk Thicknesses 2 mm 3 mm 4 mm 6 mm 8 mm Intended applications Foot orthotics and insoles Cushioning layers in inner shoes Top cover layers for orthotic devices Pressure relief for sensitive feet Diabetic and neuropathic foot care Rheumatoid and painful joint conditions Cushioning in orthoses Functional lining for support orthoses and corsets Protection of high pressure areas Key properties Extremely soft bedding material Excellent damping and cushioning Absorbs shear forces in the horizontal load plane Helps reduce pain during walking Flexible and comfortable Closed cell hygienic structure Durable and washable Suitable for sensitive and diabetic feet Processing notes Use standard EVA bonding methods Adjust contact pressure to suit the softness of the material Thermoform at 110°C to 130°C (230°F to 266°F) Avoid excessive pressure during forming to maintain cushioning properties nora® Lunatec Motion A12 is an ideal material for orthotic, prosthetic, and orthopaedic footwear workshops requiring maximum comfort, pressure relief, and shear force protection, especially for diabetic, rheumatic, and highly sensitive patients.

Read more less