The Amparo Molding Textile is a specialist textile material used during prosthetic socket fabrication to help achieve a complete and consistent vacuum around the socket during the molding process. Applied as part of the Amparo fabrication workflow, the textile helps create an effective vacuum pathway and supports even pressure distribution while the heated socket material is being formed. This contributes to more controlled molding and a more consistent final socket shape. Its flexible construction allows it to conform around the socket and residual-limb model without interfering with the forming process. Key Features Designed to support total vacuum during socket molding Helps promote even vacuum distribution Supports controlled thermoplastic forming Flexible and easy to position Suitable for use within the Amparo socket fabrication workflow Useful in clinic, workshop and mobile fitting environments Supplied in a practical roll format for repeated use Technical Information Reference: 901-MT Length: Approx. 10 m Application: Vacuum-assisted prosthetic socket molding The Amparo Molding Textile is a simple but important consumable within the socket fabrication process, helping clinicians maintain reliable vacuum conditions and achieve consistent molding results.

Read more less

The Amparo Stretch Foil Roll is an extra-resistant compression film designed for use during prosthetic socket fitting and residual-limb preparation. The stretch foil is wrapped around the residual limb to provide controlled compression and volume reduction, helping the clinician prepare the limb for socket forming and achieve a more consistent fitting environment. Its strong, highly stretchable construction allows the foil to conform closely to the limb while maintaining the tension required during the Amparo fitting process. Key Features Extra-resistant stretch film for prosthetic fitting Used for compression and reduction of the residual limb Helps create a more consistent limb shape before socket forming Conforms closely to the residual limb Supports controlled circumferential compression Strong and flexible construction Suitable for clinic, workshop and mobile fitting environments Designed for use within the Amparo direct-fit socket workflow Technical Information Reference: PCF Roll length: 150 m Width: 10 cm Application: Residual-limb compression and volume reduction The Amparo Stretch Foil Roll provides a simple and effective way to apply controlled compression during socket preparation, helping clinicians manage residual-limb volume as part of the fitting process.

Read more less

The Amparo Thermo Gloves are protective workshop gloves designed for handling and shaping heated thermoplastic during prosthetic socket fabrication. Their long design helps protect both the hands and wrists, while the close-fitting construction maintains the dexterity needed for controlled socket shaping and finishing. This makes them particularly suitable for direct-forming workflows where clinicians need to work safely with warm thermoplastic while still maintaining good hand control. Made with Para-Aramid and a seamless construction, the gloves provide a practical balance of heat protection, flexibility and comfort for prosthetic workshop use. Key Features Designed for handling heated thermoplastic Long shape helps protect hands and wrists Tight-fitting design supports good dexterity Suitable for shaping prosthetic sockets Made with Para-Aramid Seamless construction for improved comfort Suitable for clinic, workshop and mobile fitting environments Practical protective equipment for Amparo socket fabrication Technical Information Reference: TGL Size: One size – Size 9 Material: Para-Aramid Construction: Seamless Application: Handling and shaping heated thermoplastic The Amparo Thermo Gloves help clinicians work safely and confidently with heated socket materials while maintaining the precision and control required during prosthetic fabrication.

Read more less

The Amparo Textile Scissors are professional-grade cutting scissors designed for prosthetic fabrication and general workshop use. Built to an industry-standard format, they are suitable for cutting textiles as well as heated thermoplastic materials, making them a versatile tool within the Amparo socket fabrication workflow. Their 8 inch / 20 cm length provides good control for precise trimming while remaining compact enough for use in clinic, workshop and mobile fitting environments. Key Features Industry-standard workshop scissors Suitable for cutting textiles Can be used for trimming hot thermoplastic Supports clean and controlled cutting Compact and easy to handle Suitable for prosthetic fabrication and adjustment Useful for clinic, workshop and mobile fitting applications Technical Information Reference: TSC Length: 8 in / 20 cm Application: Textiles and heated thermoplastic materials The Amparo Textile Scissors provide a simple, reliable cutting tool for day-to-day prosthetic fabrication, helping clinicians trim materials accurately throughout the fitting process.

Read more less

The Amparo Leather Shears are heavy-duty curved scissors designed for accurate trimming and shaping during prosthetic socket fabrication. Their bent blade profile makes them particularly well suited to cutting soft curves and small radii, allowing the prosthetist to follow the contour of the socket more easily and achieve a clean, controlled edge. With a length of 9.5 inches / 24 cm, the shears provide a practical balance of leverage, control and precision for workshop and mobile fitting use. Key Features Curved blade for accurate contour cutting Ideal for soft curves and small radii Well suited to creating and refining socket contours Supports clean and controlled trimming Heavy-duty workshop design Suitable for prosthetic fabrication and adjustment Useful in clinic, workshop and mobile fitting environments Technical Information Reference: MSH Length: 9.5 in / 24 cm Blade type: Bent / curved Application: Trimming and shaping prosthetic socket contours The Amparo Leather Shears are a practical fabrication tool for clinicians who need greater control when cutting curved socket edges and detailed contours.

Read more less

The Amparo Workshop Bag is a large-capacity mobile transport solution designed to carry the essential tools and equipment required for prosthetic treatment away from the conventional workshop. With a generous 111–120 litre capacity, the bag provides space for a complete mobile fitting setup while helping keep equipment together during transport between clinics, outreach locations and prosthetic camps. Two integrated wheels and an extendable handle make the bag easier to move, even when carrying heavier workshop tools and accessories. Key Features Designed to carry the tools required for prosthetic treatment Large 111–120 litre storage capacity Suitable for mobile workshops and outreach programmes 2 integrated wheels for easier transport Extendable handle for convenient mobility Helps keep prosthetic equipment together during travel Suitable for clinic-to-clinic transport Ideal for humanitarian programmes and prosthetic fitting camps Supports the portability of the Amparo fitting system Technical Information Reference: RWB Capacity: 111–120 litres Mobility: 2 wheels Handle: Extendable Application: Transport of prosthetic tools and workshop equipment The Amparo Workshop Bag helps turn the Amparo system into a genuinely mobile prosthetic fitting solution, allowing clinicians to transport the equipment they need to deliver treatment in clinics, remote locations and outreach environments.

Read more less

The Amparo Tool Storage Bag is a protective transport case designed to keep Amparo fitting tools organised, separated and secure between clinic, workshop and mobile fitting locations. Its padded construction helps protect equipment during transport, while adjustable internal partitions allow the storage layout to be adapted to different tools and accessories. This makes it easier for prosthetists to keep equipment organised and quickly accessible during fittings. A built-in carry handle supports convenient transport, making the bag particularly useful for mobile prosthetic services, outreach programmes and fitting camps. Key Features Protects Amparo tools during transport and storage Padded construction to help reduce impact and movement Adjustable internal partitions for flexible organisation Keeps tools separated and easier to access Integrated carry handle Suitable for clinic, workshop and mobile use Helps maintain an organised Amparo fitting kit Ideal for outreach programmes and prosthetic fitting camps Technical Information Reference: TSB Type: Protective tool storage and transport bag Internal organisation: Adjustable padded partitions Carry method: Integrated handle The Amparo Tool Storage Bag provides a practical way to keep essential fitting equipment protected, organised and ready for use wherever prosthetic care is being delivered.

Read more less

The Amparo Vacuum Adaptor is designed to connect the Amparo vacuum pump securely to the distal end of the prosthetic socket during socket fabrication and fitting. It provides the interface needed to transfer vacuum efficiently from the pump to the socket, helping support controlled forming and consistent pressure during the Amparo fitting process. The adaptor is supplied with a manometer and filter, allowing the clinician to monitor vacuum pressure while helping protect the pump and vacuum line from debris. Key Features Connects the vacuum pump to the distal end of the socket Designed for use within the Amparo socket fabrication workflow Includes integrated manometer for pressure monitoring Includes filter to help protect the vacuum system Supports controlled and consistent vacuum application Compact and easy to use Suitable for clinic, mobile and outreach fitting environments Included Components Vacuum adaptor Manometer Filter Technical Information Reference: VAX-02 Application: Connection between vacuum pump and distal socket Compatible use: Amparo prosthetic socket fabrication systems The Amparo Vacuum Adaptor provides a simple and reliable connection point between the socket and vacuum source, helping clinicians maintain better control over the vacuum-assisted fitting and forming process.

Read more less

The Amparo Mobile Vacuum Pump is a compact, high-performance vacuum solution designed for prosthetic socket fitting in the clinic or on the go. Delivering up to 0.8 bar vacuum pressure with an airflow capacity of 68 litres per minute, the pump provides the reliable vacuum performance required during Amparo socket fabrication and fitting workflows. At just 4.4 kg, its portable format makes it easy to transport between treatment rooms, mobile clinics, outreach programmes and prosthetic fitting camps. This gives clinicians the flexibility to perform socket fittings outside a conventional prosthetic workshop without compromising on the vacuum equipment required for the process. Key Features Portable vacuum pump for prosthetic socket fitting Designed for use with Amparo socket fabrication workflows Suitable for both clinic-based and mobile fittings 0.8 bar vacuum performance High airflow capacity of 68 L/min Compact and easy to transport Weighs only 4.4 kg Ideal for mobile clinics, humanitarian programmes and prosthetic fitting camps Reduces dependence on fixed workshop vacuum systems Supports flexible point-of-care prosthetic fabrication Technical Specifications Reference: VP-02 Weight: 4.4 kg Dimensions: 30.5 × 12 × 17 cm Maximum Vacuum: 0.8 bar Airflow: 68 L/min Prosthetic Fabrication Wherever It Is Needed The Amparo Mobile Vacuum Pump supports the portability of the Amparo fitting system, allowing prosthetists to take essential fabrication equipment directly to the patient. Its combination of compact dimensions, low weight and strong vacuum performance makes it particularly valuable for clinics with limited workshop space and organisations delivering prosthetic care in remote or resource-limited environments.

Read more less

The Amparo Mobile Oven is a portable heating solution designed to provide even and controlled heating of the Amparo Confidence Socket during the fitting and forming process. Used together with a 2000-watt heat gun at full heat, the Mobile Oven creates a contained heating environment around the socket material. This helps distribute heat more uniformly than using a heat gun alone, supporting consistent softening of the material before forming. Its compact, mobile design makes it particularly well suited to clinics, mobile prosthetic services, outreach programmes and fitting environments where a conventional workshop oven may not be available. Key Features Designed for heating the Amparo Confidence Socket Used with a 2000 W heat gun at full heat Helps provide more even and consistent heating Supports reliable preparation of the socket material before forming Portable and easy to set up Suitable for clinics, mobile services and outreach fitting locations Reduces dependence on a fixed workshop oven Designed specifically for the Amparo direct-fit socket workflow Kit Includes Oven Hood Stand Silicone Base Insulation Cap Practical Mobile Heating The Amparo Mobile Oven gives clinicians a simple way to create a controlled heating environment wherever fittings are being carried out. By combining the oven hood and insulation components with a standard high-power heat gun, the system supports more consistent material heating while maintaining the portability that is central to the Amparo fitting approach.

Read more less

The Vertical Belt Sander Machine for P&O Workshop Use is a heavy-duty finishing and shaping machine designed for prosthetic and orthotic workshops. Built with a durable mild steel body and powered by a 1HP motor, it provides reliable sanding performance for shaping, trimming and finishing orthotic and prosthetic components. This machine is suitable for routine workshop applications including the finishing of plastic, foam, laminated and orthotic materials. Its vertical belt configuration allows technicians to work efficiently on curved, contoured and custom-fabricated components, supporting cleaner edges, smoother surfaces and more accurate final adjustments. The machine uses a 79” x 4” sanding belt and operates on a 220–230V single-phase power supply, making it suitable for standard workshop electrical setups. The upper roller is fitted with a bearing system and includes vertical and tilting adjustment for accurate belt alignment, helping maintain stable operation and consistent sanding performance. With its robust construction, practical workshop design and simple operation, the Vertical Belt Sander is an essential piece of equipment for P&O facilities, orthotic labs, prosthetic workshops, rehabilitation centres and technical training departments. Key Features Heavy-duty mild steel body for workshop durability Designed for shaping and finishing prosthetic and orthotic components Vertical belt configuration for efficient material control 79” x 4” sanding belt size 1HP motor for reliable sanding performance 220–230V AC, single-phase, 50Hz power input Upper roller bearing with vertical and tilting adjustment Adjustable belt alignment for smoother operation Suitable for plastic, foam, laminated and orthotic materials Practical machine for daily P&O workshop use Product Specifications Product: Vertical Belt Sander Machine for P&O Workshop UseSander Type: Belt SanderUsage/Application: Shaping and finishingPower Consumption: 1HPPower Input: 220–230V ACPhase: Single PhaseFrequency: 50HzMaterial: Mild SteelBelt Dimension: 79” x 4”Warranty: 1 year Suitable For Prosthetic and orthotic workshops Orthotic insole and brace fabrication labs Prosthetic socket finishing areas Rehabilitation centres with technical workshops O&P education and training centres Custom orthopaedic appliance workshops

Read more less

The Qaadir Plaster SS Work Table is a durable stainless-steel work table designed for daily use in prosthetic and orthotic workshops. Built for plaster work, model preparation, casting support and general workshop handling, it provides a strong, easy-to-clean working surface suitable for busy clinical and technical environments. Manufactured with a polished SS 304 stainless-steel top and base, the table is designed to withstand regular exposure to plaster, water, cleaning agents and workshop materials. Its rectangular 5 ft x 2.5 ft working area offers practical space for plaster modification, model finishing and fabrication tasks. The table includes three shelf tiers for convenient storage of tools, plaster supplies, consumables and workshop accessories. Galvanized depositing grates are included to support plaster handling and drainage during use, with two grates on one side and one grate on the right side. Key Features Heavy-duty medical/workshop table for P&O environments Suitable for plaster work, model preparation and fabrication support SS 304 stainless-steel construction for durability and hygiene Polished stainless-steel surface for easy cleaning Rectangular working area for practical workshop use Three shelf tiers for organised storage Galvanized depositing grates for plaster handling Stable stainless-steel base with stainless-steel/MS frame support Designed for commercial prosthetic and orthotic workshop use Product Specifications Specification Details Product Plaster SS Work Table Application Prosthetic & Orthotic workshop Table Type Medical / workshop table Material Stainless steel Stainless Steel Grade SS 304 Top Material Stainless steel Frame Material Stainless steel + MS Base Type Stainless steel Table Shape Rectangular Size 5 x 2.5 ft Dimensions 60" L x 30" D x 33" H Cabinet No Shelves / Tiers 3 shelves Surface Finish Polished Suitable For Commercial use Depositing Grates Two galvanized grates on one side and one galvanized grate on the right side Ideal For Prosthetic and orthotic workshops Plaster rooms Rehabilitation engineering departments Orthopaedic appliance centres Training institutions Hospital-based P&O fabrication units

Read more less

The Qaadir Cotton Stockinette – 23 Metre Roll is a versatile clinical and workshop consumable designed for orthotic and prosthetic clinicians and technicians who need dependable stockinette for casting, limb preparation, socket work, and general fabrication support. Made for day-to-day use in O&P clinics and technical environments, it provides a practical cotton layer for a wide range of upper limb, lower limb, paediatric, and adult applications. In orthotic and prosthetic practice, cotton stockinette is commonly used during plaster casting, limb assessment, mould preparation, socket fabrication, protective covering, and bench-side material handling. For clinicians, it helps create a clean and efficient patient preparation process before casting or treatment. For technicians, it supports smoother workshop workflows during model preparation, lamination setup, and fabrication tasks where a reliable stockinette is essential. Supplied in a 23 metre roll, this Qaadir cotton stockinette is available in multiple widths, allowing O&P teams to select the most appropriate size for different anatomical areas and fabrication requirements. Narrower widths are useful for smaller limb sections and paediatric applications, while wider options are better suited to larger limb volumes, transfemoral work, body jackets, and other specialist uses. This makes the range a practical choice for clinics and workshops that want one stockinette family covering a broad range of orthotic and prosthetic needs. Key features Cotton stockinette for orthotic and prosthetic clinicians and technicians Supplied in a 23 metre roll for routine clinic and workshop use Available in multiple widths to suit different applications Suitable for casting, limb preparation, socket work, and fabrication support Useful for upper limb, lower limb, paediatric, and adult O&P workflows Practical for clinics, rehabilitation departments, cast rooms, and fabrication workshops Easy-to-store roll format for efficient day-to-day use The Qaadir Cotton Stockinette – 23 Metre Roll is an essential O&P consumable for clinicians and technicians who need a dependable, multi-size stockinette range for casting, preparation, and fabrication workflows.

Read more less

The Qaadir Heavy Staples 15mm for Staple Gun are designed for orthotic and prosthetic clinicians and technicians who need strong, reliable fastening during fabrication, upholstery, bench work, and general workshop tasks. Suitable for use with compatible staple guns, these heavy-duty staples provide secure fixing performance when working with materials commonly handled in O&P clinics and technical workshops. In orthotic and prosthetic environments, 15 mm heavy staples can be useful for securing leather, fabrics, padding, webbing, foams, and other workshop materials during temporary assembly, bench preparation, finishing, packaging, or equipment maintenance tasks. Their longer leg length helps provide a firmer hold in applications where a stronger grip is needed, making them a practical consumable for busy fabrication spaces. The Qaadir Heavy Staples 15mm for Staple Gun are a dependable choice for technicians who need consistent fastening performance for routine workshop use. Whether used during orthotic bench work, prosthetic fabrication support, or general clinic maintenance, they help keep essential materials secured efficiently and with minimal effort. Key features Heavy-duty 15 mm staples for compatible staple guns Designed for orthotic and prosthetic workshop applications Suitable for fastening leather, fabrics, padding, webbing, and other materials Helps provide a secure hold for bench and fabrication tasks Useful for upholstery, workshop support, packaging, and maintenance work Practical consumable for daily O&P technical use The Qaadir Heavy Staples 15mm for Staple Gun are an essential workshop fastening solution for orthotic and prosthetic professionals who need dependable staple performance across a wide range of fabrication and maintenance tasks.

Read more less

The Qaadir Sandpaper Roll 60 Grit 10 Metres is a heavy-duty abrasive roll designed for orthotic and prosthetic clinicians and technicians who need reliable material removal during fabrication, modification, and finishing workflows. With a coarse 60 grit surface and a continuous 10 metre roll, it is well suited to shaping, smoothing, and preparing a wide range of materials commonly handled in O&P workshops. The reference listing describes this product as a 60 grit sandpaper roll measuring approximately 10 metres long and about 11.4 cm wide. In orthotic and prosthetic practice, this type of sandpaper roll is useful for trimming and refining plaster models, smoothing edges on plastics, preparing surfaces before bonding, and supporting general workshop finishing tasks. The coarse grit makes it especially suitable for faster stock removal where technicians need to level, shape, or clean up material efficiently before moving to finer finishing stages. The reference listing also describes the roll as an abrasive emery cloth / aluminium oxide type product intended for sanding and polishing applications. Its roll format gives O&P workshops flexibility to cut exactly the length needed for bench work, hand sanding, or use with suitable sanding blocks and tools. This makes it practical for clinics and fabrication labs that want to keep a versatile abrasive on hand for everyday technical use without wasting material on fixed-size sheets. Key features Coarse 60 grit sandpaper roll for orthotic and prosthetic workshop use Continuous 10 metre roll for flexible day-to-day fabrication tasks Approximate width of 11.4 cm Suitable for shaping, smoothing, edge refinement, and surface preparation Useful for plaster, plastics, and general O&P workshop materials Roll format allows technicians to cut the required length as needed Abrasive cloth-style construction for practical workshop durability The Qaadir Sandpaper Roll 60 Grit 10 Metres is a practical workshop essential for orthotic and prosthetic professionals who need a dependable coarse abrasive for everyday fabrication, rectification, and finishing work.

Read more less

The Qaadir T Square Metal Ruler is a practical measuring and layout tool for orthotic and prosthetic clinicians and technicians who need accurate straight-line marking, material alignment, and pattern development in clinic and workshop settings. Based on a metal T-ruler format, this type of tool is designed for clear measurement, repeatable marking, and dependable day-to-day use across fabrication and fitting workflows. The reference product is described as a 12 inch / 30 cm metal T-ruler made from high-impact carbon steel, with inch and centimetre markings and a graduated T-head. In orthotic and prosthetic practice, a T square ruler is useful for marking sheet materials, checking straight edges, preparing bench layouts, aligning components, and supporting pattern work during fabrication. It can be especially helpful when working with foam, plastics, leather, thermoplastic sheets, and other workshop materials that require clean reference lines and consistent measurement. The reference product is also described as being laser printed on both sides with measurements graduated in 1/16 inch and 1 mm, helping improve readability and measuring precision. Its metal construction makes it well suited to O&P workshops where durability matters. The black body and high-contrast white markings described for the reference item support visibility at the workbench, while the T-square format allows the tool to be used for both straight measuring and right-angle layout tasks. The reference listings also describe it as suitable for use as a T square, L square, or L ruler, adding flexibility for technicians handling different fabrication and marking tasks. Key features Metal T square ruler for orthotic and prosthetic clinicians and technicians Suitable for measuring, marking, alignment, and pattern preparation 12 inch / 30 cm ruler format Made from high-impact carbon steel Dual inch and centimetre graduations Marked in 1/16 inch and 1 mm increments High-contrast measurement markings for easy bench use Can be used as a T square, L square, or L ruler The Qaadir T Square Metal Ruler is a simple but essential workshop tool for O&P professionals who need reliable measurement and layout control during orthotic and prosthetic fabrication.

Read more less

The Qaadir Medecast Utility Scissor is a practical everyday cutting tool for orthotic and prosthetic clinicians and technicians who need reliable performance for routine clinical, casting, and workshop tasks. Designed for day-to-day use in O&P environments, it is suitable for cutting bandages, stockinette, padding, tapes, soft dressings, liners, and other lightweight materials commonly handled during patient care, cast preparation, fitting, and fabrication support. In orthotic and prosthetic clinics, a utility scissor is an essential instrument for general treatment room and bench-side use. It helps clinicians and technicians manage routine preparation and adjustment tasks quickly and efficiently, whether setting up for casting, trimming soft materials during fittings, or supporting workflow in busy plaster rooms and fabrication spaces. The straightforward design makes it a dependable multi-purpose option for clinics that need a practical scissor for frequent daily handling. The Qaadir Medecast Utility Scissor is available as a single unit or in a Pack of 10, giving clinics and workshops the flexibility to purchase individual replacements or equip multiple treatment rooms, cast stations, mobile kits, and technical benches at the same time. The pack option is especially useful for higher-volume O&P facilities that want consistent instrument availability across the department. Available options Qaadir Medecast Utility Scissor Qaadir Medecast Utility Scissor – Pack of 10 Key features Practical utility scissor for orthotic and prosthetic clinicians and technicians Suitable for cutting bandages, stockinette, padding, tapes, and soft clinical materials Useful for casting, fitting, treatment room, and workshop support tasks Simple, dependable design for routine daily use Available as a single scissor or Pack of 10 Ideal for O&P clinics, plaster rooms, fabrication areas, and mobile clinical kits Whether used as a general-purpose clinic instrument or stocked across multiple workstations, the Qaadir Medecast Utility Scissor offers orthotic and prosthetic professionals a practical and efficient cutting solution for everyday workflow needs.

Read more less

The Qaadir Ergo Supercut Cast Scissor with TC Blades range is designed for orthotic and prosthetic clinicians and technicians who need comfortable handling, strong cutting performance, and dependable durability during cast room, fitting, and fabrication support tasks. Available in standard and left-hand 18 cm options, this ergonomic scissor range is well suited to O&P environments where repeated daily use makes control, grip, and cutting efficiency especially important. In orthotic and prosthetic practice, this type of cast scissor is ideal for trimming padding, stockinette, bandages, liners, and other soft clinical or workshop materials used during casting, fitting, modification, and finishing procedures. The 18 cm length provides a practical balance of reach and control, while the ergonomic handle design helps improve grip and reduce hand fatigue during repeated use. Ergonomic surgical instrument handles are commonly described as improving feel, grip, control, and user comfort. The Supercut format is intended to support smoother, more efficient cutting, making this range a practical choice for clinicians and technicians who want greater precision in routine patient care and fabrication workflows. The TC blades designation refers to tungsten carbide inserts or cutting edges, which are widely used in surgical instruments to improve wear resistance and extend cutting life in high-use settings. For left-handed users, the Ergo Supercut Cast Scissor with TC Blades Left Hand (18cm) offers the same ergonomic and durable cutting performance in a configuration better suited to natural left-hand handling. This makes the range especially useful for O&P clinics that want to provide more appropriate instrument options for different users without compromising quality or workflow efficiency. Available options Qaadir Ergo Supercut Cast Scissor with TC Blades (18cm) Qaadir Ergo Supercut Cast Scissor with TC Blades Left Hand (18cm) Key features 18 cm ergonomic Supercut cast scissor for orthotic and prosthetic use Available in standard and left-hand versions TC blades for enhanced cutting durability and longer service life Ergonomic handling designed to support better grip, control, and reduced hand fatigue Suitable for trimming padding, stockinette, bandages, liners, and soft workshop materials Ideal for O&P clinics, cast rooms, and fabrication workflows The Qaadir Ergo Supercut Cast Scissor with TC Blades range is a practical choice for orthotic and prosthetic professionals who want a more comfortable, durable, and performance-focused cutting instrument for everyday clinical and technical use.

Read more less

The Qaadir Mini Supercut Cast Scissor (14cm) is a compact precision cutting instrument designed for orthotic and prosthetic clinicians and technicians who need excellent control for fine trimming, cast room support, and detailed material handling. Its smaller 14 cm format makes it especially suitable for close working areas where manoeuvrability, visibility, and accurate hand control are essential. In orthotic and prosthetic practice, the Qaadir Mini Supercut Cast Scissor (14cm) is well suited to trimming padding, stockinette, soft bandage materials, liners, and other lightweight clinical or workshop materials used during casting, fitting, and finishing procedures. The compact profile allows clinicians and technicians to work more easily in tighter spaces, while the Supercut design supports efficient, clean cutting during day-to-day patient care and technical tasks. This scissor is a practical addition to O&P treatment rooms, plaster rooms, fabrication benches, and mobile clinical kits where smaller instruments are often preferred for quick adjustments and detail-focused work. Its size makes it particularly useful for clinicians and technicians who want a lightweight cast scissor option for controlled trimming without the bulk of a larger instrument. Key features Compact 14 cm mini Supercut cast scissor Designed for orthotic and prosthetic clinicians and technicians Suitable for fine trimming and detail-focused cutting tasks Ideal for padding, stockinette, soft bandages, and lightweight materials Supports controlled handling in tight or precise working areas Suitable for O&P clinics, cast rooms, and fabrication workflows The Qaadir Mini Supercut Cast Scissor (14cm) is a practical, easy-to-handle cutting tool for O&P professionals who need precision, control, and efficiency in smaller-scale clinical and workshop applications.

Read more less

The Qaadir Supercut Cast Scissor range is designed for orthotic and prosthetic clinicians and technicians who need strong, controlled cutting performance for cast room, dressing, padding, and fabrication support tasks. In surgical instrument terminology, SuperCut scissors generally refer to a cutting format designed for improved cutting performance, while tungsten carbide (TC) blades are used to enhance edge durability in higher-use environments. In orthotic and prosthetic practice, this style of scissor is well suited to trimming casting materials, bandages, padding, stockinette, and other soft goods used during patient preparation, cast modification, and workshop support. The 18 cm length offers a practical balance of reach and control for everyday use in O&P clinics, plaster rooms, and technical workspaces. A left-hand option is included for clinicians and technicians who need a more natural cutting action and better ergonomic control, while the TC blade version is ideal for users who want longer-lasting cutting performance in busy clinical settings. Available options Qaadir Supercut Cast Scissor (18cm) Qaadir Supercut Cast Scissor (18cm) Left Hand Qaadir Supercut Cast Scissor (18cm) TC Blades Key features 18 cm Supercut cast scissor for orthotic and prosthetic applications Designed for controlled cutting of casting materials, bandages, padding, and soft goods Suitable for O&P clinics, cast rooms, and workshop support workflows Supercut blade format for enhanced cutting performance TC blade option available for improved edge durability Left-hand version available for improved comfort and control for left-handed users Practical for daily clinical and technical use The Qaadir Supercut Cast Scissor range gives orthotic and prosthetic professionals a dependable choice of standard, left-hand, and TC blade options for efficient day-to-day cutting tasks across clinical and fabrication workflows.

Read more less

The Qaadir Cast Cutter Scissor range is designed for orthotic and prosthetic clinicians and technicians who need controlled, reliable cutting performance during cast removal, cast modification, and workshop preparation tasks. Developed for use in O&P clinical and technical environments, this range offers a selection of specialised manual cast cutter patterns to support different handling preferences, access requirements, and working techniques. In orthotic and prosthetic practice, manual cast cutters are useful during plaster cast removal, cast opening, trimming, and adjustment procedures where accuracy and control are essential. They can support clinicians and technicians when working on negative casts, modification stages, and general cast room workflows. The different blade and guard configurations in the Qaadir Cast Cutter range allow users to select a model that best matches their preferred technique and the level of protection or reach required for the job. This range includes guarded and special-point designs intended to support safer, more precise handling in clinical and fabrication settings. The 19 cm Special Design Guarded option provides a compact guarded format for controlled cast cutting tasks. The 18 cm Special Point Design offers a more pointed profile for users who want greater access in tighter or more detailed working areas. The 23 cm Long Blade Special Design Guarded version gives added reach for larger casts or workflows where a longer blade format is preferred. Available options Qaadir Cast Cutter (19cm) Special Design Guarded Qaadir Cast Cutter (18cm) Special Point Design Qaadir Cast Cutter (23cm) Long Blade Special Design Guarded Key features Manual cast cutter range for orthotic and prosthetic clinicians and technicians Suitable for cast removal, cast opening, trimming, and modification workflows Available in guarded, special-point, and long-blade configurations Designed to support controlled handling and precise cutting Suitable for O&P clinics, plaster rooms, and fabrication workshops Multiple sizes available to suit different user preferences and applications Whether used for routine plaster cast handling or more detailed cast room work, the Qaadir Cast Cutter range gives orthotic and prosthetic professionals flexible instrument options for efficient day-to-day clinical and technical use.

Read more less

The Qaadir Bruns Bandage Scissor range is a heavy-duty clinical cutting solution for orthotic and prosthetic clinicians and technicians who need safe, controlled removal of bandages, padding, stockinette, plaster-related materials, and low-temperature thermoplastics during treatment and fabrication workflows. Bruns-style bandage scissors are commonly offered in a 24 cm format with a protected tip for cutting close to the skin, and are described by one O&P supplier as suitable for bandages, stockinette, padding, plaster of Paris, synthetic materials, and low thermoplastics. In orthotic and prosthetic clinics, this style of scissor is well suited to cast room use, dressing and bandage removal, splinting support, trimming of soft materials, and general treatment room preparation. The longer 24 cm length provides added reach and leverage compared with smaller bandage scissors, making it especially useful when clinicians and technicians are working through bulkier materials or need stronger cutting performance in busy O&P environments. This O&P application is an inference based on the instrument’s heavy-duty bandage and plaster-cutting design. The range is available in multiple configurations to suit different user preferences and workshop demands. The standard 24 cm version offers a classic heavy-duty format for routine bandage and plaster-related tasks. The 24 cm TC Blades version adds tungsten carbide cutting edges for users who want enhanced edge durability in higher-use settings. A dedicated 24 cm TC Blades Left Hand version supports left-handed clinicians and technicians with a more natural cutting action. The 24 cm Serrated version is designed to improve grip on material during cutting, with suppliers listing Bruns models in serrated and single-serrated forms. Available options Qaadir Bruns Bandage Scissor (24cm) Qaadir Bruns Bandage Scissor (24cm) TC Blades Qaadir Bruns Bandage Scissor (24cm) TC Blades Left Hand Qaadir Bruns Bandage Scissor (24cm Serrated) Key features Heavy-duty 24 cm Bruns bandage scissor for orthotic and prosthetic use Suitable for bandages, padding, stockinette, plaster-related materials, and low thermoplastics Protected tip design for safer cutting close to the patient Longer length provides greater reach and leverage Available in standard, TC blade, left-hand, and serrated options Suitable for O&P clinics, cast rooms, rehabilitation departments, and fabrication support workflows For orthotic and prosthetic professionals, the Qaadir Bruns Bandage Scissor range offers a dependable choice of heavy-duty configurations for clinical care, cast room work, and material handling where safe cutting performance and practical control matter.

Read more less

The Qaadir Lister Bandage Scissor range is designed for orthotic and prosthetic clinicians and technicians who need safe, efficient cutting of bandages, dressings, stockinettes, and soft wrapping materials in busy clinical environments. With its well-established Lister-style profile and protective lower blade, this instrument is suited to patient-facing care where controlled cutting close to the skin is essential. It is a practical addition to O&P treatment rooms, casting areas, rehabilitation departments, and post-fitting care settings. In orthotic and prosthetic practice, Lister bandage scissors are used during dressing changes, cast room preparation, prosthetic review appointments, orthotic fitting sessions, and general clinical support tasks. The angled blade design helps users slide beneath bandages and soft dressings more easily, supporting safer removal while improving control during routine procedures. This makes the Qaadir Lister Bandage Scissor range a dependable choice for clinicians and technicians who need reliable performance across day-to-day patient care workflows. The range is available in multiple sizes and configurations to suit different user preferences and clinical requirements. The 14 cm version offers a compact option for lighter-duty work and tighter treatment areas. The 18 cm version provides a versatile standard size for everyday O&P clinical use. For users seeking enhanced cutting durability, the 18 cm TC Blades version offers upgraded tungsten carbide cutting edges. A dedicated 18 cm Left Hand version supports left-handed clinicians and technicians with improved comfort and control. The 20 cm version provides additional reach and leverage for larger dressings and more demanding bandage removal tasks. Available options Qaadir Lister Bandage Scissor (14cm) Qaadir Lister Bandage Scissor (18cm) Qaadir Lister Bandage Scissor (18cm) TC Blades Qaadir Lister Bandage Scissor (18cm) Left Hand Qaadir Lister Bandage Scissor (20cm) Key features Lister-style bandage scissors for orthotic and prosthetic clinical use Suitable for bandage, dressing, and soft material removal Protective lower blade design for safer cutting close to the patient Angled profile supports control and ease of access Available in multiple sizes and specialist configurations Suitable for treatment rooms, cast clinics, and rehabilitation settings Left-hand and tungsten carbide blade options available for specific user needs Whether used for routine dressing removal, post-fitting care, or general treatment room procedures, the Qaadir Lister Bandage Scissor range gives orthotic and prosthetic professionals a practical choice of sizes and configurations to match their clinical workflow.  

Read more less

The Qaadir Curved Nibbler Scissor (12cm) is a compact precision cutting instrument designed for orthotic and prosthetic clinicians and technicians who need controlled trimming and detailed finishing during fabrication and fitting work. Its curved profile helps improve access to tighter contours and shaped areas, making it especially useful when working on fine material adjustments in the clinic or workshop. With its 12 cm size, this scissor is easy to handle for close, accurate cutting where control and visibility are important. In orthotic and prosthetic practice, a curved nibbler scissor can be a practical tool for detail work on soft interface materials, light plastics, edge refinement, and general bench tasks that require a neat, deliberate cut. The curved blade shape supports more precise navigation around shaped components and awkward angles, helping technicians and clinicians make cleaner adjustments during fabrication, modification, or fitting preparation. Built for day-to-day O&P use, the Qaadir Curved Nibbler Scissor (12cm) is well suited to treatment rooms, fabrication labs, and finishing benches where smaller hand tools play an important role in achieving a professional result. Its compact format also makes it a useful addition to instrument trays and mobile clinical setups where space efficiency matters. Key features Compact 12 cm curved nibbler scissor Designed for orthotic and prosthetic clinical and technical applications Curved profile helps with controlled trimming in contoured areas Suitable for precision cutting, adjustment, and finishing tasks Easy to handle for close-detail work Useful in both clinic and workshop environments The Qaadir Curved Nibbler Scissor (12cm) is a practical precision instrument for O&P professionals who need reliable control for small-scale trimming and finishing across a wide range of orthotic and prosthetic workflows.

Read more less