Workshop Planner Equipment

Every machine, bench and fitting in the Qaadir Workshop Planner – the free 3D tool for laying out prosthetic and orthotic workshops: plaster rooms, lamination rooms, thermoforming, machine and finishing rooms, sewing rooms, insole labs, fitting and gait rooms.

Each product carries its planning footprint, working space and service needs (power, compressed air, vacuum, dust extraction and water), so you can design your rooms in 3D, check clearances and request one quote for the whole workshop. Qaadir supplies, installs and trains across the Middle East, Africa and Asia from the UAE.

186 products

  • Amparo Majicast hydrostatic weight-bearing casting system for transtibial residual limbs

    Amparo Majicast Hydrostatic Weight-Bearing Casting System

    The Amparo Majicast is a direct-fit, hydrostatic weight-bearing casting system designed to capture the residual limb under full functional load, helping clinicians create a more accurate and consistent transtibial socket shape in a single session. Instead of relying on traditional plaster casting, Majicast uses the patient’s own body weight together with evenly distributed hydrostatic pressure to support the residual limb during shape capture. This allows the clinician to capture the limb in a condition that more closely reflects how it behaves during real-world prosthetic use. Key Features Hydrostatic weight-bearing shape capture Uses the patient’s body weight to support accurate shaping and load transfer Proprietary soft tissue control helps stabilise distal tissues during fitting Supports more consistent, pressure-balanced socket shapes Reduces variability associated with manual casting techniques Supports rapid progression from check socket to interim or definitive socket Designed specifically for Amparo remouldable sockets Eliminates the need for conventional plaster casting in the Amparo workflow Can reduce material waste through socket remoulding and targeted adjustments Supports digital workflows by allowing the captured socket or shape to be scanned for CAD/CAM and documentation Suitable for clinics, treatment rooms, mobile services and outreach programmes Soft Tissue Control One of the key elements of the Majicast system is its approach to distal soft tissue control. Soft tissue can move or distort when the residual limb is loaded, which can affect the geometry captured during conventional casting. Majicast is designed to stabilise the distal tissues while the patient is weight bearing, helping the clinician create a more anatomically representative and pressure-balanced socket shape. Faster Socket Fitting The actual hydrostatic shape-capture stage typically takes around 2–3 minutes. Depending on the clinic workflow and prosthetic components being used, Amparo states that the pathway to a functional prosthetic device can potentially be completed in under 60 minutes. This makes Majicast particularly valuable for clinics looking to: Reduce repeat appointments Shorten socket delivery times Improve workflow efficiency Standardise fitting between clinicians Provide same-day or single-visit prosthetic services Designed for Mobile and Outreach Prosthetics Majicast does not require electricity or plumbing during operation. It is filled with water from a standard tap and then functions as a closed hydrostatic system. This makes it suitable not only for established prosthetic clinics but also for mobile clinics, humanitarian programmes and prosthetic fitting camps where conventional workshop infrastructure may be limited. Digital Workflow Integration Majicast can also act as a bridge between direct-fit prosthetics and digital manufacturing. Once the weight-bearing shape has been captured, the resulting socket or shape can be 3D scanned and converted into a digital model, supporting CAD/CAM design, documentation and future manufacturing workflows. Technical Information Current application: Transtibial / below-knee fittings Casting time: Approximately 2–3 minutes Majicast weight when empty: Approx. 25 kg Weight when filled: Approx. 55 kg Maximum supported patient weight: 125 kg Power requirement: None Water requirement: Filled from a standard tap System type: Closed hydrostatic weight-bearing casting system Socket compatibility: Designed for Amparo sockets A More Standardised Starting Point for Socket Fit Majicast is designed to make the first stage of socket fabrication more repeatable, functional and efficient. By capturing the residual limb under weight-bearing conditions and combining this with soft tissue control, the system gives prosthetists a consistent starting point for creating a comfortable total-contact socket. For clinics using the wider Amparo system, Majicast acts as the core capital equipment that supports rapid, remouldable and potentially single-visit transtibial socket fitting.

    Dhs. 66,107.00

  • Amparo mobile oven for heating thermoformable direct-fit prosthetic sockets

    Amparo Mobile Oven

    The Amparo Mobile Oven is a portable heating solution designed to provide even and controlled heating of the Amparo Confidence Socket during the fitting and forming process. Used together with a 2000-watt heat gun at full heat, the Mobile Oven creates a contained heating environment around the socket material. This helps distribute heat more uniformly than using a heat gun alone, supporting consistent softening of the material before forming. Its compact, mobile design makes it particularly well suited to clinics, mobile prosthetic services, outreach programmes and fitting environments where a conventional workshop oven may not be available. Key Features Designed for heating the Amparo Confidence Socket Used with a 2000 W heat gun at full heat Helps provide more even and consistent heating Supports reliable preparation of the socket material before forming Portable and easy to set up Suitable for clinics, mobile services and outreach fitting locations Reduces dependence on a fixed workshop oven Designed specifically for the Amparo direct-fit socket workflow Kit Includes Oven Hood Stand Silicone Base Insulation Cap Practical Mobile Heating The Amparo Mobile Oven gives clinicians a simple way to create a controlled heating environment wherever fittings are being carried out. By combining the oven hood and insulation components with a standard high-power heat gun, the system supports more consistent material heating while maintaining the portability that is central to the Amparo fitting approach.

    Dhs. 2,700.00

  • Amparo mobile vacuum pump for direct-fit prosthetic socket fitting

    Amparo Mobile Vacuum Pump

    The Amparo Mobile Vacuum Pump is a compact, high-performance vacuum solution designed for prosthetic socket fitting in the clinic or on the go. Delivering up to 0.8 bar vacuum pressure with an airflow capacity of 68 litres per minute, the pump provides the reliable vacuum performance required during Amparo socket fabrication and fitting workflows. At just 4.4 kg, its portable format makes it easy to transport between treatment rooms, mobile clinics, outreach programmes and prosthetic fitting camps. This gives clinicians the flexibility to perform socket fittings outside a conventional prosthetic workshop without compromising on the vacuum equipment required for the process. Key Features Portable vacuum pump for prosthetic socket fitting Designed for use with Amparo socket fabrication workflows Suitable for both clinic-based and mobile fittings 0.8 bar vacuum performance High airflow capacity of 68 L/min Compact and easy to transport Weighs only 4.4 kg Ideal for mobile clinics, humanitarian programmes and prosthetic fitting camps Reduces dependence on fixed workshop vacuum systems Supports flexible point-of-care prosthetic fabrication Technical Specifications Reference: VP-02 Weight: 4.4 kg Dimensions: 30.5 × 12 × 17 cm Maximum Vacuum: 0.8 bar Airflow: 68 L/min Prosthetic Fabrication Wherever It Is Needed The Amparo Mobile Vacuum Pump supports the portability of the Amparo fitting system, allowing prosthetists to take essential fabrication equipment directly to the patient. Its combination of compact dimensions, low weight and strong vacuum performance makes it particularly valuable for clinics with limited workshop space and organisations delivering prosthetic care in remote or resource-limited environments.

    Dhs. 1,010.00

  • Basinglead Truth-600 large-format FDM 3D printer for custom spinal braces and orthoses

    Basinglead Truth-600 Spinal Brace 3D Printer – Large Format FDM System for Custom Orthotic and Spinal Brace Production

    The Basinglead Truth-600 3D Printer is an industrial-grade large-format FDM printer designed specifically for the production of spinal braces, orthotic shells, and large custom rehabilitation devices. With an extra-large build volume of 600 × 600 × 1000 mm, the Truth-600 allows full-size torso orthoses, scoliosis braces, TLSO, and other large orthotic components to be printed in a single build, making it ideal for modern digital orthotics workflows. The system features a fully enclosed chassis, dual Z-axis mechanical structure, and high-precision servo-driven motion control, ensuring stable printing even for tall or complex models. A closed air filtration system, power-loss recovery, and material-runout detection provide reliable long-duration printing, which is essential when producing large orthotic devices that may require many hours of continuous operation. With support for flexible and rigid materials including TPU, PETG, PLA, and ABS, the Truth-600 enables production of lightweight, ventilated, and patient-specific braces using CAD/CAM and 3D scanning workflows. This printer is ideal for prosthetic & orthotic laboratories, hospitals, scoliosis clinics, and digital orthotics manufacturing centres. Key Features Large-format 3D printer for spinal brace production Extra-large build volume for full torso orthoses High precision servo motion control system Fully enclosed industrial chassis Dual Z-axis synchronous screw structure Built-in air filtration system Power-loss resume printing function Filament run-out detection alarm High temperature extrusion for engineering materials Compatible with flexible and rigid filaments Built-in LED lighting for monitoring prints Large colour touchscreen control panel Technical Specifications Model: Truth-600 Printing Technology: FDM (Fused Deposition Modelling) Build Volume: 600 × 600 × 1000 mm Layer Resolution: 0.05 – 0.3 mm Positioning Accuracy: ≤ 0.0125 mm Number of Nozzles: 1 Printing Speed: 30 – 250 mm/s Nozzle Diameter Options: 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.8 mm Max Nozzle Temperature: 310°C Supported Materials: PLA, ABS, TPU, PETG Chassis Structure: Fully enclosed, front door + top opening Motion System: Dual Z-axis synchronous screw + linear guide + servo motor Filtration System: Included Power-loss Resume: Supported Material Run-out Alarm: Supported Control Screen: 257 mm colour display CPU: 32-bit ARM microcontroller File Formats: STL, OBJ External Storage: USB / SD card / U-disk Operating System Support: Windows / Linux / Mac Power Supply: AC100–240V, 50/60 Hz Machine Size: 1200 × 950 × 1850 mm Packing Size: 1350 × 1100 × 2000 mm Gross Weight: ≥ 330 kg Recommended Operating Temperature: 15–32°C Storage Temperature: 0–32°C Filament Storage: Suspended feeding system Typical Applications in Orthotics & Prosthetics Scoliosis braces (TLSO, LSO, Boston brace) Custom spinal orthoses Large AFO / KAFO shells Prosthetic check sockets Seating and positioning shells Rehabilitation supports Research and development devices Typical Users Orthotic & prosthetic laboratories Scoliosis clinics Rehabilitation hospitals Universities & research centres Digital orthotics manufacturers Humanitarian fabrication centres The Basinglead Truth-600 Spinal Brace 3D Printer provides a powerful large-format digital manufacturing solution, enabling orthotic professionals to produce full-size custom braces with high precision, improved ventilation design, and reduced fabrication time compared with traditional methods.

    Dhs. 109,444.00

  • Hardo AERO+ FS-12P central dust extraction filter cabinet for O&P workshops

    Hardo AERO+ FS-12P Filter Cabinet – Central Dust Extraction for O&P Workshops

    The Hardo AERO+ Filter Cabinet FS-12P is a HARDO AERO+ central filter cabinet for extracting grinding and trimming dust from orthopaedic workshop machines, developed with Götz Service in Germany.Its flow-optimised design delivers more than 40% greater extraction capacity than the previous generation at the same energy demand. Two-stage pre-separation keeps most coarse dust away from the filter elements, and software-controlled jet-pulse dedusting keeps the filter surface clean for long-lasting suction and longer service intervals.Connect HARDO Ortholine machines (or other workshop machines) through a ducting network to create a cleaner, quieter and healthier workplace.Key Features HARDO AERO+ flow-optimised design: 40%+ more extraction capacity Negative-pressure (vacuum) principle with high-performance exhauster Two-stage pre-separation of coarse particles Automatic jet-pulse filter cleaning Integrated sound insulation Easy-to-remove dust containers Control cabinet mounted right, pipe connection left (mirrored layout on request) Options: adjustable control box (automatic power regulation), integrated silencer, dust-box doors Made in Germany Technical Characteristics Airflow: 6,000 m³/h Filter surface: 32.6 m² Electrical supply: 400 V / 3 Ph + N + PE / 50/60 Hz Connected load: 6.6 kW Dimensions (W × D × H): 2990 × 850 × 2000 mm Weight: 889 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Central extraction for HARDO Ortholine grinding and trimming machines Dust control for insole, orthosis and prosthetic socket grinding Extraction for routers and finishing machines in O&P workshops New workshop fit-outs and upgrades of existing machine rooms Typical Users O&P workshops running several grinding or trimming machines Orthopaedic shoe workshops Hospital and rehabilitation-centre O&P departments New workshop fit-outs planned by Qaadir The Hardo AERO+ Filter Cabinet FS-12P gives O&P workshops healthy room air, lower noise and consistently strong suction. Qaadir plans the ducting layout, installs and services the system from the UAE.

    Dhs. 207,543.00

  • Hardo AERO+ FS-4P central dust extraction filter cabinet for O&P workshops

    Hardo AERO+ FS-4P Filter Cabinet – Central Dust Extraction for O&P Workshops

    The Hardo AERO+ Filter Cabinet FS-4P is a HARDO AERO+ central filter cabinet for extracting grinding and trimming dust from orthopaedic workshop machines, developed with Götz Service in Germany.Its flow-optimised design delivers more than 40% greater extraction capacity than the previous generation at the same energy demand. Two-stage pre-separation keeps most coarse dust away from the filter elements, and software-controlled jet-pulse dedusting keeps the filter surface clean for long-lasting suction and longer service intervals.Connect HARDO Ortholine machines (or other workshop machines) through a ducting network to create a cleaner, quieter and healthier workplace.Key Features HARDO AERO+ flow-optimised design: 40%+ more extraction capacity Negative-pressure (vacuum) principle with high-performance exhauster Two-stage pre-separation of coarse particles Automatic jet-pulse filter cleaning Integrated sound insulation Easy-to-remove dust containers Control cabinet mounted right, pipe connection left (mirrored layout on request) Options: adjustable control box (automatic power regulation), integrated silencer, dust-box doors Made in Germany Technical Characteristics Airflow: 2,000 m³/h Filter surface: 10.8 m² Electrical supply: 400 V / 3 Ph + N + PE / 50/60 Hz Connected load: 2.2 kW Dimensions (W × D × H): 1400 × 850 × 2000 mm Weight: 359 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Central extraction for HARDO Ortholine grinding and trimming machines Dust control for insole, orthosis and prosthetic socket grinding Extraction for routers and finishing machines in O&P workshops New workshop fit-outs and upgrades of existing machine rooms Typical Users O&P workshops running several grinding or trimming machines Orthopaedic shoe workshops Hospital and rehabilitation-centre O&P departments New workshop fit-outs planned by Qaadir The Hardo AERO+ Filter Cabinet FS-4P gives O&P workshops healthy room air, lower noise and consistently strong suction. Qaadir plans the ducting layout, installs and services the system from the UAE.

    Dhs. 80,739.00

  • Hardo AERO+ FS-8P central dust extraction filter cabinet for O&P workshops

    Hardo AERO+ FS-8P Filter Cabinet – Central Dust Extraction for O&P Workshops

    The Hardo AERO+ Filter Cabinet FS-8P is a HARDO AERO+ central filter cabinet for extracting grinding and trimming dust from orthopaedic workshop machines, developed with Götz Service in Germany.Its flow-optimised design delivers more than 40% greater extraction capacity than the previous generation at the same energy demand. Two-stage pre-separation keeps most coarse dust away from the filter elements, and software-controlled jet-pulse dedusting keeps the filter surface clean for long-lasting suction and longer service intervals.Connect HARDO Ortholine machines (or other workshop machines) through a ducting network to create a cleaner, quieter and healthier workplace.Key Features HARDO AERO+ flow-optimised design: 40%+ more extraction capacity Negative-pressure (vacuum) principle with high-performance exhauster Two-stage pre-separation of coarse particles Automatic jet-pulse filter cleaning Integrated sound insulation Easy-to-remove dust containers Control cabinet mounted right, pipe connection left (mirrored layout on request) Options: adjustable control box (automatic power regulation), integrated silencer, dust-box doors Made in Germany Technical Characteristics Airflow: 4,000 m³/h Filter surface: 21.6 m² Electrical supply: 400 V / 3 Ph + N + PE / 50/60 Hz Connected load: 4.4 kW Dimensions (W × D × H): 2195 × 850 × 2000 mm Weight: 625 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Central extraction for HARDO Ortholine grinding and trimming machines Dust control for insole, orthosis and prosthetic socket grinding Extraction for routers and finishing machines in O&P workshops New workshop fit-outs and upgrades of existing machine rooms Typical Users O&P workshops running several grinding or trimming machines Orthopaedic shoe workshops Hospital and rehabilitation-centre O&P departments New workshop fit-outs planned by Qaadir The Hardo AERO+ Filter Cabinet FS-8P gives O&P workshops healthy room air, lower noise and consistently strong suction. Qaadir plans the ducting layout, installs and services the system from the UAE.

    Dhs. 136,122.00

  • Hardo Caravelle Combi 115 B combined trimming, sanding and polishing machine

    Hardo Caravelle Combi 115 B Combined Finishing Machine with Automatic Filter Cleaning

    The Hardo Caravelle Combi 115 B is a made-to-order German workshop machine from HARDO's premium Caravelle series, with a fully integrated extraction system so it can run without a separate filter cabinet.The Combi 115 B is HARDO's premium combined finisher: twin heel and sole trimmers, two sanding belts with pneumatic tension and a revolving six-tool polishing section. Caravelle machines add an extra fine-dust filter, fully automatic filter cleaning, pneumatic belt tensioning and automatic flap control, keeping the workshop clean and quiet while delivering over 99% dust separation. Special requests can be built in at the factory.Key Features Twin trimmers (B-version: heel and sole trimmer) Sanding belts 2 × 40 × Ø175 mm 6 polishing tools on rotating shafts Filter bag with flutes Integrated extraction with cotton filter plus additional fine-dust filter Fully automatic filter cleaning Suction wall placed well back; removable suction nozzles Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Made to order: special equipment possible Made in Germany Technical Characteristics Series: HARDO Caravelle (integrated extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 2 × 40 × Ø175 mm Polishing: 6 tools on rotating shafts Belt tension: pneumatic Electrical supply: 400 V / 3 Ph / 50 Hz / 3.4 kW Dimensions (W × D × H): 1150 × 780 × 1855 mm Weight: 330 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Polishing and edge-finishing on the 6-tool revolving polishing section Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Caravelle Combi 115 B is the complete premium finishing station for orthopaedic shoe and O&P workshops that want everything in one clean, quiet machine. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 166,501.00

  • Hardo Caravelle Ortho 115 B orthopaedic trimming and sanding machine

    Hardo Caravelle Ortho 115 B Trimming and Sanding Machine with Automatic Filter Cleaning

    The Hardo Caravelle Ortho 115 B is a made-to-order German workshop machine from HARDO's premium Caravelle series, with a fully integrated extraction system so it can run without a separate filter cabinet.The Ortho 115 B combines twin heel and sole trimmers with a narrow and a wide sanding belt and a sanding wheel on bayonet. Caravelle machines add an extra fine-dust filter, fully automatic filter cleaning, pneumatic belt tensioning and automatic flap control, keeping the workshop clean and quiet while delivering over 99% dust separation. Special requests can be built in at the factory.Key Features Twin trimmers (B-version: heel and sole trimmer) Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Sanding wheel on bayonet Integrated extraction with cotton filter plus additional fine-dust filter Fully automatic filter cleaning Suction wall placed well back; removable suction nozzles Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Made to order: special equipment possible Made in Germany Technical Characteristics Series: HARDO Caravelle (integrated extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: pneumatic Filtration: cotton filter + additional fine-dust filter, automatic cleaning Electrical supply: 400 V / 3 Ph / 50 Hz / 3.95 kW Dimensions (W × D × H): 1150 × 780 × 1855 mm Weight: 320 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Caravelle Ortho 115 B is a premium, self-contained trimming and sanding workstation for demanding O&P and orthopaedic shoe workshops. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 136,452.00

  • Hardo Caravelle Ortho Solo 75 orthopaedic sanding machine with integrated extraction

    Hardo Caravelle Ortho Solo 75 Sanding Machine with Automatic Filter Cleaning

    The Hardo Caravelle Ortho Solo 75 is a made-to-order German workshop machine from HARDO's premium Caravelle series, with a fully integrated extraction system so it can run without a separate filter cabinet.The Ortho Solo 75 is the compact Caravelle sander, with a narrow and a wide belt for insole, orthosis and shoe work. Caravelle machines add an extra fine-dust filter, fully automatic filter cleaning, pneumatic belt tensioning and automatic flap control, keeping the workshop clean and quiet while delivering over 99% dust separation. Special requests can be built in at the factory.Key Features Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Heel breaster on bayonet Integrated extraction with cotton filter plus additional fine-dust filter Fully automatic filter cleaning Suction wall placed well back; removable suction nozzles Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Made to order: special equipment possible Made in Germany Technical Characteristics Series: HARDO Caravelle (integrated extraction) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: pneumatic Filtration: cotton filter + additional fine-dust filter, automatic cleaning Electrical supply: 400 V / 3 Ph / 50 Hz / 2.1 kW Dimensions (W × D × H): 720 × 780 × 1855 mm Weight: 210 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Adjusting ready-made shoes (rocker soles, raises, wedges) Trimming and sanding diabetic and accommodative footwear components Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Caravelle Ortho Solo 75 is a premium, self-cleaning sanding station for clinics and workshops that want the cleanest possible air without a central filter system. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 105,599.00

  • Hardo Caravelle Rekord 30 polishing machine with cotton and bristle polishing wheels and integrated extraction

    Hardo Caravelle Rekord 30 Polishing Machine with Integrated Extraction

    The Hardo Caravelle Rekord 30 is a compact German polishing machine from HARDO's Caravelle series, with integrated extraction for clean edge and surface finishing.The Rekord 30 is the smallest machine in the Rekord polishing family, suited to workshops that need a dedicated polishing station alongside their sanding machine. Like all Caravelle machines it is built to order in Germany.Key Features Dedicated polishing machine Integrated extraction system Operation by double push buttons Ergonomic HARDO design Made to order in Germany Technical Characteristics Series: HARDO Caravelle Rekord (polishing) Extraction: integrated Colour: light grey RAL 7035 Electrical supply: 400 V / 3 Ph / 50 Hz Detailed dimensions, tool count and power: on request with quotation Origin: Germany Typical Applications in Prosthetics & Orthotics Polishing orthopaedic shoe edges, heels and soles Finishing leather and synthetic shoe components Final finishing of custom footwear before fitting Typical Users Orthopaedic shoemakers Prosthetic & orthotic workshops building footwear Shoe repair and adjustment workshops Hospital and rehabilitation-centre O&P departments The Hardo Caravelle Rekord 30 adds a compact, dedicated polishing station to any orthopaedic shoe or O&P workshop. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 50,216.00

  • Hardo Ideal Combi 115 B combined finishing machine with trimmers, belts and polishing

    Hardo Ideal Combi 115 B Combined Finishing Machine with Integrated Extraction

    The Hardo Ideal Combi 115 B is a German-built orthopaedic workshop machine from HARDO's Ideal series: serial-production machines with an integrated cotton-filter extraction system, offering HARDO quality at an accessible price.The Combi 115 B is a complete finisher: twin heel and sole trimmers, two sanding belts and a revolving polishing section with six tools, all with integrated extraction. Ideal machines use manual belt tension and manual suction-flap activation with rotary switches, keeping the design simple and robust. Options include a two-speed sanding motor, LED light bar and the HARDO vertical lift.Key Features Twin trimmers (B-version: heel and sole trimmer) Sanding belts 2 × 40 × Ø175 mm Revolving polishing section with 6 tools Diagonal suction wall Integrated extraction system with cotton filter (no filter cabinet needed) Manual belt tension and suction-flap activation Heel breaster on bayonet Swivelling naumkeag Serial-production design: robust and cost-effective Options: two-speed motor, LED light bar, vertical lift Made in Germany Technical Characteristics Series: HARDO Ideal (integrated extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 2 × 40 × Ø175 mm Polishing: 6 tools on rotating shafts Belt tension: manual Electrical supply: 400 V / 3 Ph / 50 Hz / 3.4 kW Dimensions (W × D × H): 1150 × 780 × 1760 mm Weight: 440 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Polishing and edge-finishing on the 6-tool revolving polishing section Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Ideal Combi 115 B gives orthopaedic shoe and O&P workshops a full trimming, sanding and polishing station in a single self-contained machine. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 113,704.00

  • Hardo Ideal Ortho 85 B trimming and sanding machine with integrated extraction

    Hardo Ideal Ortho 85 B Trimming and Sanding Machine with Integrated Extraction

    The Hardo Ideal Ortho 85 B is a German-built orthopaedic workshop machine from HARDO's Ideal series: serial-production machines with an integrated cotton-filter extraction system, offering HARDO quality at an accessible price.The Ortho 85 B adds twin heel and sole trimmers to the sanding belts, giving a compact all-round trimming and sanding machine with its own extraction. Ideal machines use manual belt tension and manual suction-flap activation with rotary switches, keeping the design simple and robust. Options include a two-speed sanding motor, LED light bar and the HARDO vertical lift.Key Features Twin trimmers (B-version: heel and sole trimmer) Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Diagonal suction wall Integrated extraction system with cotton filter (no filter cabinet needed) Manual belt tension and suction-flap activation Heel breaster on bayonet Swivelling naumkeag Serial-production design: robust and cost-effective Options: two-speed motor, LED light bar, vertical lift Made in Germany Technical Characteristics Series: HARDO Ideal (integrated extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: manual Electrical supply: 400 V / 3 Ph / 50 Hz / 2.85 kW Dimensions (W × D × H): 850 × 780 × 1720 mm Weight: 305 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Ideal Ortho 85 B is a compact, self-contained trimming and sanding machine that brings German build quality to O&P workshops at an accessible price. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 80,375.00

  • Hardo Ideal Ortho Solo 75 belt sanding machine for insoles and orthoses

    Hardo Ideal Ortho Solo 75 Belt Sanding Machine with Integrated Extraction

    The Hardo Ideal Ortho Solo 75 is a German-built orthopaedic workshop machine from HARDO's Ideal series: serial-production machines with an integrated cotton-filter extraction system, offering HARDO quality at an accessible price.The Ortho Solo 75 is the entry point to HARDO quality: a compact belt sander with a narrow and a wide belt and its own extraction, ideal for clinics and workshops setting up their first professional grinding station. Ideal machines use manual belt tension and manual suction-flap activation with rotary switches, keeping the design simple and robust. Options include a two-speed sanding motor, LED light bar and the HARDO vertical lift.Key Features Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Suction wall placed well back Integrated extraction system with cotton filter (no filter cabinet needed) Manual belt tension and suction-flap activation Heel breaster on bayonet Swivelling naumkeag Serial-production design: robust and cost-effective Options: two-speed motor, LED light bar, vertical lift Made in Germany Technical Characteristics Series: HARDO Ideal (integrated extraction) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: manual Electrical supply: 400 V / 3 Ph / 50 Hz / 3.75 kW Dimensions (W × D × H): 730 × 780 × 1720 mm Weight: 320 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Adjusting ready-made shoes (rocker soles, raises, wedges) Trimming and sanding diabetic and accommodative footwear components Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Ideal Ortho Solo 75 is a cost-effective, self-contained German sanding machine for O&P workshops that need dust control without a central filter cabinet. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 62,174.00

  • Hardo Ortholine 115 B trimming and sanding machine for external extraction

    Hardo Ortholine 115 B Orthopaedic Trimming and Sanding Machine

    The Hardo Ortholine 115 B is a German-built orthopaedic workshop machine from HARDO's Ortholine series, designed specifically for orthopaedic shoe technology and for connection to an external filter cabinet such as the HARDO AERO+ FS range.The 115 B combines twin heel and sole trimmers with a narrow and a wide sanding belt, each separately controlled, in a full 1.15 m frame. Pneumatic belt tensioning, double push-button operation and HARDO's ergonomic design make it a durable, low-maintenance centrepiece for busy O&P and orthopaedic shoe workshops.Key Features Twin trimmers (B-version: heel and sole trimmer) Separate belt control Sanding wheel on bayonet Heel breaster on bayonet Designed for connection to an external HARDO filter cabinet Suction wall set extremely far back for more working space Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Hardo vertical-lift height adjustment available (integrated to save space) Made in Germany Technical Characteristics Series: HARDO Ortholine (external extraction) Trimmers: twin B-trimmers (heel and sole) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: pneumatic Electrical supply: 400 V / 3 Ph / 50 Hz / 3.2 kW Dimensions (W × D × H): 1190 × 800 × 1880 mm Weight: 355 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Heel and sole trimming with the twin B-trimmers Adjusting ready-made shoes (rocker soles, raises, wedges) Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Ortholine 115 B is a complete trimming and sanding workstation for O&P and orthopaedic shoe workshops with central extraction. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 128,336.00

  • Hardo Ortholine Solo 115 orthopaedic belt sanding machine

    Hardo Ortholine Solo 115 Orthopaedic Belt Sanding Machine

    The Hardo Ortholine Solo 115 is a German-built orthopaedic workshop machine from HARDO's Ortholine series, designed specifically for orthopaedic shoe technology and for connection to an external filter cabinet such as the HARDO AERO+ FS range.The Solo 115 is the full-width sanding model: a trimmer channel without trimmers gives an enlarged work space on the left for tools on bayonet, and each belt has its own drive. Pneumatic belt tensioning, double push-button operation and HARDO's ergonomic design make it a durable, low-maintenance centrepiece for busy O&P and orthopaedic shoe workshops.Key Features Enlarged work space on the left for the bayonet tool Independent belt drives Sanding wheel on bayonet Heel breaster Ø90 mm on bayonet Designed for connection to an external HARDO filter cabinet Suction wall set extremely far back for more working space Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Hardo vertical-lift height adjustment available (integrated to save space) Made in Germany Technical Characteristics Series: HARDO Ortholine (external extraction) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Heel breaster: Ø90 mm on bayonet Belt tension: pneumatic Electrical supply: 400 V / 3 Ph / 50 Hz / 2.45 kW Dimensions (W × D × H): 1150 × 780 × 1855 mm Weight: 295 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Adjusting ready-made shoes (rocker soles, raises, wedges) Trimming and sanding diabetic and accommodative footwear components Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Ortholine Solo 115 is a versatile, full-width sanding station for high-volume O&P and orthopaedic shoe workshops. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 123,172.00

  • Hardo Ortholine Solo 75 orthopaedic belt sanding machine

    Hardo Ortholine Solo 75 Orthopaedic Belt Sanding Machine

    The Hardo Ortholine Solo 75 is a German-built orthopaedic workshop machine from HARDO's Ortholine series, designed specifically for orthopaedic shoe technology and for connection to an external filter cabinet such as the HARDO AERO+ FS range.The Solo 75 is the compact sanding-only model, with a narrow and a wide belt for shaping insoles, cork and foam build-ups and shoe components. Pneumatic belt tensioning, double push-button operation and HARDO's ergonomic design make it a durable, low-maintenance centrepiece for busy O&P and orthopaedic shoe workshops.Key Features Sanding belts 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Heel breaster on bayonet Designed for connection to an external HARDO filter cabinet Suction wall set extremely far back for more working space Pneumatic sanding belt tensioning Suction flaps controlled by each respective drive Multi-adjustable naumkeag Operation by double push buttons Hardo vertical-lift height adjustment available (integrated to save space) Made in Germany Technical Characteristics Series: HARDO Ortholine (external extraction) Sanding belts: 1 × 40 × Ø175 mm + 1 × 100 × Ø100 mm Belt tension: pneumatic Electrical supply: 400 V / 3 Ph / 50 Hz / 1.35 kW Dimensions (W × D × H): 750 × 780 × 1930 mm Weight: 265 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Grinding and finishing custom insoles and foot orthoses Shaping cork, EVA and foam build-ups and wedges Finishing orthopaedic shoe soles, heels and edges Adjusting ready-made shoes (rocker soles, raises, wedges) Trimming and sanding diabetic and accommodative footwear components Typical Users Orthopaedic shoe technicians (OSM) Prosthetic & orthotic workshops Insole and foot orthosis laboratories Hospital and rehabilitation-centre O&P departments Podiatry and pedorthic labs with in-house fabrication The Hardo Ortholine Solo 75 is a compact, heavy-duty sanding station for O&P and orthopaedic shoe workshops with central extraction. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 94,985.00

  • Hardo Standard rapid press for pressing soles and heels

    Hardo Standard Rapid Press for Soles and Heels

    The Hardo Standard Rapid Press is a German-built HARDO high-speed pneumatic press for pressing soles and heels in orthopaedic and custom shoemaking.The Standard is HARDO's cost-effective rapid press: a liquid-filled sole cushion and heel presser slide horizontally into the working position. HARDO presses are known for efficient, safe handling: the patented HARDO-tronic safety control with automatic timer and a central emergency stop protect the operator, and the pivoting V-type pad arm makes changing shoes quick and easy. A solid steel construction and quiet, fully automatic compressor unit give a very long service life.Key Features HARDO-tronic safety control with automatic timer Liquid-filled sole cushion and heel presser, sliding horizontally to the working position Pivoting V-type pad arm Includes 1 set (12 pairs) of internal presser plates Rear panel with hooks to store presser plates Compressed-air connection Fully automatic compressor unit Option: high riding-boot version; bench model available Made in Germany Technical Characteristics Electrical supply: 230 V / 1 Ph / 50 Hz / 1.1 kW Dimensions (W × D × H): 470 × 550 × 1750 mm Weight: 130 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Pressing soles onto orthopaedic and custom shoes Heel attachment and pressing Bonding sole build-ups and rocker soles Shoe adjustments and repairs Typical Users Orthopaedic shoemakers Prosthetic & orthotic workshops building footwear Shoe repair and adjustment workshops Hospital and rehabilitation-centre O&P departments The Hardo Standard Rapid Press is a reliable, affordable sole and heel press for orthopaedic shoe and O&P workshops. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 35,790.00

  • Hardo Trumpf compact rapid sole and heel press

    Hardo Trumpf Compact Rapid Press for Soles and Heels

    The Hardo Trumpf Rapid Press is a German-built HARDO high-speed pneumatic press for pressing soles and heels in orthopaedic and custom shoemaking.The Trumpf is the compact rapid press with separate sole and heel presses, a liquid-filled sole cushion and a pressure reducer with manometer. HARDO presses are known for efficient, safe handling: the patented HARDO-tronic safety control with automatic timer and a central emergency stop protect the operator, and the pivoting V-type pad arm makes changing shoes quick and easy. A solid steel construction and quiet, fully automatic compressor unit give a very long service life.Key Features HARDO-tronic safety control with automatic timer Separate sole press with liquid-filled sole cushion Separate heel press Pivoting V-type pad arm Includes 1 set (12 pairs) of internal presser plates Rear panel with hooks to store presser plates Compressed-air supply with pressure reducer and manometer Fully automatic compressor unit Option: high riding-boot version; bench model available Made in Germany Technical Characteristics Electrical supply: 400 V / 3 Ph / 50 Hz / 0.75 kW Dimensions (W × D × H): 640 × 580 × 1750 mm Weight: 160 kg Colour: light grey RAL 7035 Origin: Germany Typical Applications in Prosthetics & Orthotics Pressing soles onto orthopaedic and custom shoes Heel attachment and pressing Bonding sole build-ups and rocker soles Shoe adjustments and repairs Typical Users Orthopaedic shoemakers Prosthetic & orthotic workshops building footwear Shoe repair and adjustment workshops Hospital and rehabilitation-centre O&P departments The Hardo Trumpf Rapid Press is a compact, safe and fast sole and heel press for busy orthopaedic shoe workshops. Supplied, installed and serviced from the UAE by Qaadir.

    Dhs. 51,836.00

  • Landis 1000 Workmaster Sander, compact high-volume orthopaedic sanding machine

    Landis 1000 Workmaster Sander

    The Landis 1000 WorkMaster Sander is a high-volume, efficient orthopedic sanding machine designed for professional workshops and clinics. Its compact design with integrated dust extraction ensures precision finishing while optimizing workspace utilization. High-Volume Sanding – Engineered for efficient and consistent sanding of orthotics, prosthetics, and other precision applications. Compact Design – Space-saving structure allows installation in tight areas without compromising performance. Integrated Dust Extraction – Built-in dust collection system maintains a clean workspace, improves safety, and reduces airborne particles. Durable Construction – Manufactured from premium materials to ensure long-lasting reliability and minimal maintenance. User-Friendly Operation – Ergonomic design and simple controls allow comfortable and efficient operation during extended use. Ideal for orthopedic workshops, clinics, and custom manufacturing, the Landis 1000 WorkMaster Sander combines efficiency, precision, and compactness, making it an essential tool for professional high-volume sanding and finishing tasks.  

    Dhs. 28,188.00

  • Landis 335 Sewing Machine for stitching orthopaedic shoes

    Landis 335 Sewing Machine for Ortho Shoe

    The Landis 335 Sewing Machine for Ortho Shoe is designed specifically for orthopedic shoe production, providing precision stitching, durability, and reliable performance. Equipped with a free arm and walking foot, it allows efficient sewing of small and curved areas while maintaining consistent stitch quality. Ideal for professional orthotic workshops and shoe manufacturing environments. Key Features Free Arm with Walking Foot: Enables easy sewing of small and curved areas Reverse Stitch Function: For reinforced stitching Small Arm Diameter: 45 mm for precision work Maximum Speed: 2200 stitches per minute for efficient production Stitch Length: Up to 5.5 mm Presser Foot Lift: 10 mm for flexible material handling Motor: ½ HP, 115 volts for reliable operation Durable Construction: Built to withstand professional workshop use The Landis 335 Sewing Machine combines precision, durability, and ease of use, making it an essential tool for orthopedic shoe workshops seeking high-quality stitching and efficient production.

    Dhs. 11,817.00

  • Landis Bench Top 5-in-1 Cutting Tool for shoemaking and leatherworking workshops

    Landis Bench Top 5in1 Cutting Tool

    The Landis Bench Top 5-in-1 Cutting Tool is a versatile and compact machine designed for professional shoemakers, repair shops, and leatherworking workshops. Combining five essential functions in one unit, it enables precise and efficient cutting, trimming, and shaping of leather, rubber, and other materials. Key Features: Five-in-One Functionality: Serves as a welt roller, sole cutter, heel trimmer, edge beveller, and skiver for maximum versatility. Efficient Cutting: Handles leather, rubber, and plastic with ease, ensuring clean and accurate results. Wide Throat: Accommodates larger materials for more flexible applications. Durable Construction: Built to withstand daily professional use with long-lasting performance. Compact Design: Bench-top model saves space while providing a stable and reliable work surface. Specifications: Width: 610 mm Depth: 203 mm Height: 508 mm Shipping Weight: 23 kg This bench-top 5-in-1 cutting tool combines versatility, precision, and durability, making it an essential addition to any O&P workshop.

    Dhs. 20,732.00

  • Landis Bench Top Naumkeag Grinder, compact grinder for shoemaking and repair

    Landis Bench Top Naumkeag Grinder

    The Landis Bench Top Naumkeag Grinder is a compact and efficient grinder designed for professional workshops, shoemakers, and repair specialists. It provides precise grinding performance while keeping the work area clean and free of dust. Key Features: Complete System: Includes cord, switch, mounting bracket, and exhaust chamber for ready-to-use operation. Universal Mounting: Can be installed on most machines or directly on a workbench. Vacuum Ready: 3” hose flange for easy connection to an existing vacuum system. Powerful Motor: ¼ HP motor operating at 3,450 RPM and 115 volts for consistent performance. This bench-top Naumkeag grinder combines precision, power, and dust control, making it an essential tool for any professional shoemaking or workshop environment.

    Dhs. 5,271.00

  • Landis Benchtop Convection Oven for heating thermoplastics in orthotic workshops

    Landis Benchtop Convection Oven

    The Landis Compact Benchtop Convection Oven is a high-precision heating solution designed for laboratories, orthotic workshops, and small production environments. With stainless steel construction, precise temperature control, and user-friendly features, it delivers consistent, reliable heating and curing for a variety of applications. Precise Thermostat Control – Adjustable up to 250°C, allowing accurate and repeatable heating for sensitive materials. Adjustable Timer – Infinitely adjustable 0–60 minutes with an active indicator light for easy monitoring. Durable Stainless Steel Housing – Both interior and exterior constructed from stainless steel; front-opening door with large viewing window and double-side supports for stability. Included Accessories – Comes with 1 tray and 1 standard rack for versatile use. Efficient Heating – Equipped with a 2400W, 60Hz fan motor, ensuring even heat distribution throughout the chamber. Compact Design – Space-saving footprint suitable for benchtop placement without compromising interior capacity. This compact Landis Convection Oven combines precision, durability, and ease of use, making it an essential tool for orthopedic labs, shoemaking workshops, and small-scale production facilities requiring consistent, high-quality heating and curing performance.

    Dhs. 6,347.00

Qaadir logo

© 2026 Qaadir - Ability for All, Powered by Shopify