The Qaadir Fleece Fan Sanding Drum is designed for fine sanding, surface conditioning and finishing in orthotic and prosthetic fabrication workshops. Its flexible fleece flaps follow curved and irregular surfaces, helping produce an even finish while reducing the risk of aggressive material removal. Ideal for final-stage finishing and blending, the drum can be used on plastics, metals and other suitable workshop materials. Key features: 60 mm diameter × 50 mm width Flexible fleece fan construction Provides controlled, consistent surface finishing Suitable for curved, contoured and irregular components Ideal for fine sanding, blending, deburring and polishing preparation Helps remove light marks and surface imperfections Suitable for orthotic and prosthetic workshop applications Designed for use with compatible sanding and polishing machinery Confirm the required grit grade, arbor size and machine compatibility before ordering.

Read more less

The Qaadir Leather Hole Punch Set is designed for producing clean, accurately sized holes in leather, rubber, foam, gasket material and similar workshop materials. It is ideal for orthotic and prosthetic technicians fabricating straps, closures, suspension systems, protective pads and other customised components. The set contains 25 individual hollow punches in graduated sizes from 1 mm to 25 mm, providing the flexibility required for both fine detailing and larger fastening holes. Each punch can be positioned directly over the material and struck with a suitable mallet on a protected cutting surface. Applications: Punching holes in orthotic and prosthetic leather straps Preparing holes for rivets, eyelets, buckles and fasteners Fabricating suspension straps and closure systems Cutting circular openings in rubber, foam and gasket materials Producing washers, spacers and small circular components Features: Complete set of 25 hollow punches Graduated sizes from 1 mm to 25 mm Produces clean and consistent circular holes Suitable for leather, rubber, foam and similar materials Individual punches allow accurate size selection Suitable for professional O&P workshops, footwear workshops and leatherwork Supplied as an organised set for convenient storage and selection Set Contents: 25 leather hole punches Sizes: 1 mm to 25 mm in 1 mm increments

Read more less

The Qaadir Water Exhaust Pump is a practical manual pump designed to remove residual water from plaster separators before the collected plaster or gypsum sludge is disposed of. It is ideal for orthotic and prosthetic workshops, rehabilitation centres and plaster rooms where moulds, casts and fabrication tools are regularly cleaned. Simply insert the pumping tube into the residual water, place the flexible outlet hose into a suitable collection container and operate the pump lever. The manual pumping action transfers the water cleanly and efficiently, making plaster-separator maintenance easier and reducing unnecessary contact with the collected waste. Features: Designed for draining residual water from plaster separators Manual operation with no electrical connection required Pumping tube reaches into the separator chamber Flexible outlet hose directs water into a separate container Helps simplify plaster and gypsum sludge disposal Reduces mess during separator cleaning and maintenance Lightweight and easy to operate Suitable for orthotic, prosthetic and rehabilitation workshops Technical Specifications: Overall length: 480 mm Pump stroke: 135 mm Displacement volume: approximately 100 ml per stroke

Read more less

The Qaadir Plus T-Handle Hex Key is designed for efficient tightening and loosening of hexagonal socket screws during orthotic and prosthetic fabrication, assembly and equipment maintenance. Manufactured from high-grade chrome vanadium steel, it delivers dependable durability and workshop performance. Its ball-ended tip enables angled engagement, providing easier access to screws positioned in confined or difficult-to-reach areas. The ergonomic T-shaped handle offers a secure, comfortable grip while generating additional torque for controlled fastening. High-grade chrome vanadium steel construction Ball end for angled access to hex screws Suitable for confined and difficult-to-reach areas Ergonomic T-shaped handle Provides a strong, secure grip Delivers additional torque for efficient fastening Suitable for O&P assembly, adjustment and workshop maintenance

Read more less

The Qaadir Plumb Bob provides a reliable vertical reference for workshop installation, alignment and layout tasks. Its balanced 250g pointed body suspends from a suitable plumb line, allowing gravity to establish a clear and accurate vertical position. Suitable for aligning equipment, checking upright structures and positioning workshop fixtures in orthotic and prosthetic facilities, rehabilitation centres and technical training environments. Weight: 250g Tapered body with a defined reference point Provides a simple, reliable vertical reference Suitable for equipment installation, alignment and layout work Compact and easy to store in a workshop toolbox Designed for use with a suitable plumb line

Read more less

The Qaadir Engineers’ Hammer is a versatile workshop tool designed for controlled striking, assembly and general metalworking tasks in orthotic and prosthetic fabrication. Its balanced 300g forged-steel head provides effective striking force while remaining comfortable for precise bench work. The flat, ground striking face is suitable for driving pins, nails and small fittings, while the cross-peen end supports more focused striking, shaping and adjustment work. A lacquered hardwood handle provides a secure, comfortable grip and incorporates a protective sleeve at the hammer head. Head weight: 300g Overall length: approximately 305mm Head length: approximately 105mm Forged C45 tool-steel head Induction-hardened striking-face edges Flat striking face with cross-peen end Lacquered hardwood handle Protective handle sleeve and secure ring-wedge fixing Manufactured in accordance with DIN 1041 Suitable for O&P workshops, rehabilitation centres and technical training facilities

Read more less

Qaadir Flat File 200 × 20 × 5 mm – Fine, Medium or Coarse The Qaadir Flat File is a durable workshop hand tool designed for the controlled shaping, smoothing and finishing of materials used in orthotic and prosthetic fabrication. Its flat profile provides a consistent working surface for refining edges, reducing excess material and completing general bench-work tasks. Available in three cutting grades, the file can be selected according to the required level of material removal and surface finish: Fine – for precision finishing and final smoothing Medium – for general-purpose shaping and surface preparation Coarse – for faster removal of excess material and initial shaping Dimensions: 200 × 20 × 5 mm Supplied without a handle Suitable for O&P workshops, rehabilitation centres and technical training facilities

Read more less

Professional 250 mm backsaw designed for accurate, controlled cutting in prosthetic, orthotic and general workshop fabrication. The Qaadir Plus Backsaw 250 mm combines a rigid, reinforced blade design with precision-ground teeth to provide clean, controlled cuts. Its compact size makes it particularly useful for detailed workshop tasks where accuracy and stability are more important than the long cutting stroke of a conventional handsaw. Manufactured with a high-quality carbon steel blade, the saw provides a strong, well-balanced cutting platform, while the reinforced back helps minimise blade flex during use. The soft-grip handle provides comfortable, secure control during repetitive fabrication work. Key Features 250 mm Blade Length: Compact size for accurate and controlled workshop cutting. Precision-Ground Teeth: Designed to produce clean, efficient cuts. Carbon Steel Blade: Strong and durable construction for regular professional use. Reinforced Back: Helps maintain blade rigidity and minimise bending during cutting. Smooth Cutting Action: Solid, well-balanced construction supports controlled sawing. Soft-Grip Handle: Provides a comfortable and secure grip for improved cutting control. Compact & Manoeuvrable: Particularly suitable for smaller components and precision fabrication tasks. P&O Workshop Application: Ideal for cutting wood, model-making materials and other suitable workshop materials during prosthetic and orthotic fabrication. Technical Specifications Specification Details Product Qaadir Plus Backsaw Type Backsaw / tenon saw Blade Length 250 mm Blade Material Carbon steel Teeth Precision ground Handle Ergonomic soft grip Operation Manual Application Precision cutting and fabrication Primary Use Prosthetic & orthotic workshops The Qaadir Plus Backsaw 250 mm provides the blade rigidity, cutting accuracy and comfortable handling required for precise everyday fabrication work in professional P&O workshops. The specification is based on the referenced 250 mm saw, which confirms the carbon-steel blade, precision-ground teeth, soft-grip handle and rigid, balanced construction. Qaadir Plus — professional workshop tools for prosthetic and orthotic fabrication.

Read more less

The Qaadir Plus Tripod is a robust aluminium construction tripod designed for secure and accurate positioning of rotation lasers, line lasers and other compatible measuring instruments. Its integrated lifting column provides precise height adjustment, making it particularly useful for alignment, measurement and installation work in orthotic and prosthetic workshops, clinics and technical environments. The air-cushioned lifting mechanism allows the mounted instrument to move smoothly when the column is released, bringing it to a gentle stop and helping protect sensitive laser equipment. A rapid leg-locking system enables quick setup and accurate positioning, including on uneven surfaces. Key Features Durable aluminium tripod construction Integrated lifting column for precise height adjustment Adjustable working height from approximately 98 to 220 cm Air-cushioned column movement for controlled positioning Compatible with rotation lasers and line lasers Standard 5/8-inch threaded mounting screw Rapid-locking legs for quick setup Stable positioning on level or uneven surfaces Removable tripod head for convenient assembly and transport High-quality chain spread limiter Suitable for indoor and outdoor use Versatile Tripod Feet Each tripod leg incorporates a ground spike and a rotatable hard-rubber shoe: Ground spikes provide secure positioning on soil and other outdoor surfaces Rubber shoes improve grip and help prevent scratches on indoor flooring Typical Applications Laser alignment in orthotic and prosthetic workshops Establishing vertical and horizontal reference lines Positioning patients or equipment during alignment procedures Workshop machinery installation and levelling Clinic and laboratory layout work Construction, maintenance and technical installation Indoor and outdoor measurement tasks The Qaadir Plus Tripod combines a broad height-adjustment range with dependable stability and controlled movement, providing a reliable platform for professional laser measurement and alignment equipment.

Read more less

The Qaadir Plus Countersink Set is a professional six-piece HSS cutting set designed for clean, accurate countersinking and deburring in metal, plastic and other fabrication materials. The three-flute cutting geometry produces smooth, chatter-free results, making the set ideal for preparing holes for countersunk screws, removing burrs and finishing drilled components. Suitable for orthotic and prosthetic workshops, engineering departments, maintenance teams and general fabrication environments, each countersink features a long cylindrical shank for secure mounting and improved access. The tools deliver their best results when operated at low cutting speeds. Key Features Six-piece HSS countersink set Sizes: 6.3, 8.3, 10.4, 12.4, 16.5 and 20.5 mm Manufactured from high-speed steel 90° countersinking angle Three cutting edges for smooth, controlled cutting Type C design in accordance with DIN 335 Long cylindrical shanks Right-hand cutting direction Sharp, precision-ground flutes Designed for burr-free and chatter-free performance Supplied in a durable storage case Suitable Materials Steel up to 900 N/mm² Aluminium Brass Plastics Bronze Cast iron Typical Applications Countersinking holes for flush-mounted screws Deburring drilled holes and cut edges Finishing metal workshop components Preparing brackets, fixtures and fabrication assemblies Orthotic and prosthetic workshop maintenance General engineering and technical fabrication The Qaadir Plus Countersink Set combines the six most useful workshop sizes in one organised set, providing reliable performance for routine professional drilling and finishing work.

Read more less

Professional 44-piece HSS metric thread-cutting set for creating, repairing and restoring internal and external threads in prosthetic, orthotic and general workshop applications. The Qaadir Tap & Die Set – 44 Piece provides a comprehensive selection of professional hand taps, dies, core drill bits and thread-cutting accessories covering the commonly used metric sizes from M3 to M12. Manufactured from High-Speed Steel (HSS), the cutting tools provide the hardness, cutting performance and wear resistance required for regular workshop use. The set is particularly useful for fabrication, equipment maintenance, component modification and repairing damaged threads within a P&O workshop. Each thread size includes a three-piece hand tap set, allowing threads to be progressively cut by hand for controlled and accurate results. The corresponding HSS dies provide the capability to produce or restore external threads. Key Features 44-Piece Professional Set: Comprehensive solution for internal and external metric thread cutting. Metric Range M3–M12: Covers seven commonly required workshop thread sizes. HSS Hand Taps: Includes 21 HSS taps manufactured to DIN 352. Three Taps per Size: Progressive three-piece hand tap sets for M3, M4, M5, M6, M8, M10 and M12. HSS-G Dies: Seven ground HSS dies manufactured to DIN 223 B, covering M3 through M12. Matching Core Drill Bits: Includes seven correctly sized HSS-G drill bits for preparing the tapping holes. Die Holders: Five sizes for securely holding the supplied threading dies. Tap Wrenches: Two hand tap wrenches provide controlled manual thread cutting. Thread Gauge: Included for identifying and checking thread pitch. Screwdriver Included: Provides an additional tool for adjustment of the supplied holders. Metal Storage Case: Keeps the complete set organised, protected and readily accessible. P&O Workshop Application: Ideal for fabrication jigs, machinery, fixtures, prosthetic and orthotic components and general equipment maintenance. Thread Sizes M3 / M4 / M5 / M6 / M8 / M10 / M12 Core Drill Sizes The set includes the corresponding HSS-G tapping drill sizes: Ø2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm. Set Contents Component Quantity / Sizes HSS Hand Taps DIN 352 21 pcs – 3 each in M3, M4, M5, M6, M8, M10, M12 HSS-G Dies DIN 223 B 7 pcs – M3, M4, M5, M6, M8, M10, M12 HSS-G Core Drill Bits 7 pcs – Ø2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm Die Holders 5 pcs – 20×5, 20×7, 25×9, 30×11, 38×14 mm Tap Wrenches 2 pcs – No. 1 & No. 2 Thread Gauge 1 pc Screwdriver 1 pc Storage Metal case Total 44 pieces The Qaadir 44 Piece HSS Tap & Die Set provides P&O technicians with a complete professional solution for producing new threads, restoring damaged threads and carrying out routine fabrication and workshop maintenance. Qaadir — practical professional tools for prosthetic and orthotic fabrication.

Read more less

The Qaadir Punch Set is a versatile six-piece workshop tool set designed for marking, driving, separating and shaping metal components. It provides orthotic and prosthetic technicians with a practical selection of taper punches, chisels and a centre punch for fabrication, repair and general workshop tasks. Manufactured from high-alloy tool steel, each tool features a polished working end for accurate contact and dependable performance. The complete set is supplied in a compact metal storage case, keeping the tools protected, organised and readily accessible at the workbench or in a mobile workshop. Applications Marking drilling positions in metal components Driving out pins, rivets and fastening elements Cutting and separating light metal sections Creating narrow grooves and channels Removing excess material during fabrication General maintenance and repair of O&P workshop equipment Set Contents 1 × taper punch, 3 mm tip 1 × taper punch, 4 mm tip 1 × centre punch, 4 mm tip 1 × crosscut chisel, 125 mm 1 × flat cold chisel, 125 mm 1 × flat cold chisel, 150 mm 1 × metal storage case Key Features Six-piece punch and chisel set High-alloy tool-steel construction Polished working ends Suitable for metalworking and general fabrication Multiple punch and chisel profiles for common workshop tasks Compact, durable metal case Organised storage and convenient portability Suitable for orthotic, prosthetic and rehabilitation workshops Technical Information Number of tools: 6 Tool types: taper punches, centre punch, crosscut chisel and flat cold chisels Material: high-alloy tool steel Finish: polished working ends Case dimensions: approximately 180 × 115 × 25 mm Set weight: approximately 702 g Supplied in: metal storage case For safety, always wear suitable eye protection and select an appropriate hammer and workpiece support when using striking tools.

Read more less

Professional 10 mm T-handle hex socket wrench designed for secure fastening, excellent leverage and controlled workshop adjustment. The Qaadir Hex Socket Wrench with T-Handle, 10 mm provides a practical combination of torque, control and accessibility for assembly, adjustment and maintenance tasks in prosthetic and orthotic workshops. The fixed T-handle design provides a comfortable two-handed grip and increased leverage compared with a conventional L-shaped hex key, making it particularly useful for frequently adjusted fasteners on P&O workshop equipment, jigs, fixtures and fabrication machinery. Key Features 10 mm Hex Socket: Designed for compatible 10 mm internal hex fasteners. T-Handle Design: Provides excellent leverage and controlled application of torque. Comfortable Operation: Wide handle allows a secure grip during tightening and loosening. Efficient Fastening: Particularly useful for repetitive workshop assembly and adjustment tasks. Robust Construction: Designed to withstand regular professional workshop use. Good Accessibility: Long shaft configuration helps reach recessed or less accessible fasteners. Workshop Essential: Suitable for equipment setup, machinery adjustment, fixtures and general maintenance. P&O Applications: Ideal for prosthetic and orthotic fabrication workshops, technical departments and rehabilitation centres. Technical Specifications Specification Details Product Qaadir Hex Socket Wrench with T-Handle Hex Size 10 mm Type T-handle hex wrench Drive Profile Internal hex / Allen Operation Manual Application Assembly, adjustment and maintenance Primary Use Prosthetic & orthotic workshops The Qaadir 10 mm Hex Socket Wrench with T-Handle is a durable everyday workshop tool providing the leverage and control required for reliable adjustment of hex fasteners during P&O fabrication and equipment maintenance. Qaadir — practical professional tools for prosthetic and orthotic fabrication.

Read more less

Professional 9-piece combination spanner set manufactured from Chrome-Vanadium steel for strength, accuracy and dependable everyday workshop use. The Qaadir Plus Combination Spanner Set provides a practical selection of metric sizes for assembly, adjustment, maintenance and fabrication tasks in prosthetic and orthotic workshops. Each spanner combines an open-ended jaw and ring end, providing two working options in a single tool. The spanners are forged from Chrome-Vanadium (CV) steel, then hardened and tempered for durability. A satin chrome-plated finish provides additional corrosion protection and a professional workshop finish. Both the open jaw and ring are manufactured with a 15° offset, improving access and working clearance when tightening or loosening fasteners in restricted positions. Precision-broached jaws and rings provide consistent tolerances and an accurate fit. Key Features 9-Piece Metric Set: Essential sizes for professional workshop use. Chrome-Vanadium Steel: Forged CV steel construction provides excellent strength and durability. Hardened & Tempered: Engineered to withstand regular professional use. Combination Design: Open-ended jaw and ring spanner in each size. 15° Offset: Both ends are angled to improve access in confined or awkward working positions. Precision Fit: Broached jaws and rings provide accurate and consistent engagement with fasteners. Corrosion Resistant: Satin chrome-plated finish helps protect against corrosion. DIN 3113: Manufactured to the recognised DIN 3113 combination-spanner standard. P&O Workshop Essential: Ideal for assembly, adjustment, machinery maintenance and general fabrication. Set Contents 6 / 8 / 10 / 11 / 12 / 13 / 14 / 17 / 19 mm Technical Specifications Specification Details Product Qaadir Plus Combination Spanner Set Number of Pieces 9 Sizes 6–19 mm Material Chrome-Vanadium steel Finish Satin chrome plated Ends Open jaw + ring Offset 15° Standard DIN 3113 Application P&O fabrication, equipment maintenance and general workshop use Qaadir Plus — professional workshop tools for prosthetic and orthotic fabrication.

Read more less

Traditional professional file handle designed for secure, comfortable control of hand files in prosthetic, orthotic and general workshop applications. The Qaadir Beech Wood File Handle provides a comfortable and reliable grip for workshop files. Manufactured from durable beech wood with a smooth varnished finish, the handle combines traditional construction with the strength required for regular professional use. A fitted metal ferrule reinforces the front of the handle around the file tang, helping reduce splitting and providing a secure connection between the file and handle. Key Features 130 mm Length: Practical size for comfortable handling and controlled filing. Beech Wood Construction: Strong, durable hardwood suitable for regular workshop use. Varnished Finish: Smooth surface provides a comfortable grip while helping protect the wood. Metal Ferrule: Reinforces the handle at the file entry point and helps prevent splitting. Ergonomic Shape: Contoured profile provides secure and comfortable hand positioning. Reusable Design: Allows compatible files to be fitted or replaced as required. Versatile Workshop Use: Suitable for engineering files used in metal, plastic, plaster and general P&O fabrication work. Technical Specifications Specification Details Product Qaadir File Handle Length 130 mm Material Beech wood Finish Varnished Reinforcement Metal ferrule Application Hand files / workshop filing Use Prosthetic, orthotic and general workshop fabrication

Read more less

Heavy-duty professional screw clamp designed for secure, controlled clamping in prosthetic, orthotic and general workshop applications. The Qaadir Malleable Cast Iron Screw Clamp combines a robust malleable cast-iron clamping system with a strong profiled steel rail to provide dependable clamping pressure during fabrication, assembly, bonding and workshop processes. Based on the professional 300/140 mm format, the clamp provides a 300 mm maximum opening and 140 mm throat depth, making it particularly useful for larger workpieces and demanding workshop applications. The benchmark Bessey TPN30BE provides clamping force of up to 5,500 N with a 32 × 10 mm profiled rail. Key Features Heavy-Duty Construction: Robust malleable cast-iron fixed and sliding arms for durability and long service life. High Clamping Force: Designed to provide powerful, controlled pressure for demanding workshop applications. 300 mm Opening: Generous clamping capacity accommodates a wide range of components and workpieces. 140 mm Throat Depth: Deep reach provides greater flexibility when positioning the clamp. Strong Profiled Steel Rail: Serrated rail construction provides stability and helps prevent unwanted movement under load. Ergonomic Wooden Handle: Comfortable traditional handle provides good grip and controlled tightening. Protective Clamping Caps: Helps protect workpiece surfaces from marking or damage during clamping. Versatile Workshop Tool: Suitable for fabrication, bonding, assembly, positioning and general workshop use. Technical Specifications Specification Details Product Qaadir Malleable Cast Iron Screw Clamp Maximum Opening 300 mm Throat Depth 140 mm Rail Size 32 × 10 mm Clamping Force Up to 5,500 N Handle Ergonomic wooden handle Clamp Body Malleable cast iron Rail Profiled steel Clamping Surfaces Protective caps Application P&O fabrication and general workshop use The 300 mm opening, 140 mm throat depth, 32 × 10 mm rail and up-to-5,500 N clamping force correspond to the Bessey TPN30BE 300/140 specification. Qaadir Workshop Tools — professional tools selected for the everyday demands of prosthetic and orthotic fabrication.

Read more less

The Qaadir Seat Awl is a precision pricker tool designed for marking and piercing leather, upholstery, textiles and other workshop materials. Its sharp point enables accurate hole placement, while the comfortable handle provides secure control during detailed fabrication and repair work. Overall length: 140 mm Sharp point for accurate marking and piercing Comfortable, easy-to-control handle Suitable for leatherwork, upholstery and workshop use Ideal for orthotic and prosthetic fabrication and repairs Durable design for professional use

Read more less

The Amparo Icecast Compatibility Adapter is designed to enable the use of selected Amparo Resilience transtibial sockets with the Icecast casting system, providing clinicians with greater flexibility when integrating Amparo sockets into an existing prosthetic workflow. The adapter creates the interface required between the Icecast system and compatible Amparo Resilience Small and Medium sockets, allowing prosthetists to combine established casting equipment with Amparo’s remouldable socket technology. Lightweight and simple to use, the adapter is particularly useful for clinics that already work with Icecast and want to introduce Amparo sockets without changing their entire casting setup. Key Features Enables compatibility between the Icecast system and selected Amparo Resilience sockets Designed for transtibial / below-knee amputees Compatible with Resilience Small and Medium sockets Lightweight construction Supports integration of Amparo sockets into existing clinical workflows Helps reduce the need for additional casting infrastructure Suitable for clinic and workshop use Technical Information Reference: ICA Weight: 85 g Dimensions: 15 × 21 cm Users: Below-knee / transtibial amputees Compatibility: Amparo Resilience Small and Medium sockets Components ICA Icecast Compatibility Adapter The Amparo Icecast Compatibility Adapter provides a practical bridge between the Icecast casting system and the Amparo Resilience range, giving prosthetists more flexibility in how they introduce and use Amparo technology within their existing fitting process.

Read more less

The Amparo Mobile Clinic Tool Set is a complete portable equipment package designed to support prosthetic socket fitting and fabrication outside a conventional workshop. Bringing together the core heating, vacuum, shaping, trimming and transport tools used in the Amparo workflow, the set gives prosthetists a practical way to deliver treatment in clinics, mobile services, outreach programmes, humanitarian projects and prosthetic fitting camps. The system is designed to reduce dependence on fixed workshop infrastructure while keeping the essential tools organised and ready for use. This makes it particularly valuable where patients may have limited access to repeated appointments or where prosthetic services need to be delivered closer to the community. Key Features Complete mobile tool set for Amparo prosthetic fittings Supports socket heating, molding, vacuum application and adjustment Designed for clinic-based and mobile prosthetic care Helps reduce reliance on traditional workshop infrastructure Suitable for outreach programmes and prosthetic fitting camps Includes storage and transport solutions for easier mobility Supports a more efficient, standardised Amparo fitting workflow Ideal for organisations delivering prosthetic care in remote or resource-limited environments Set Components MOX Mobile Oven – for even heating of Amparo socket materials VP-20PRO Mobile Vacuum Pump – portable vacuum source for socket fitting VAX-03 Vacuum Adaptor Kit – connects the vacuum system to the socket SP4 Spacer Pad Set – creates additional relief for sensitive or pressure-prone areas BVT Brim Validation Tools – supports assessment and validation of the socket brim TSB Tool Storage Bag – padded storage for smaller fitting tools RWB Workshop Bag – large-capacity wheeled transport bag PCF Stretch Foil Roll – for residual-limb compression and preparation MT-R Molding Textile – supports effective vacuum during socket molding MSH Leather Shears – curved shears for trimming socket contours TSC Textile Scissors – for textiles and heated thermoplastic TGL Thermo Gloves – protective gloves for handling heated socket materials PXW Marking Pencil – for defining socket brim and trim lines A Complete Mobile Fitting Solution The Amparo Mobile Clinic Tool Set brings the essential elements of a prosthetic workshop into a single portable package. By combining the tools required for heating, vacuum forming, shaping, trimming and finishing, clinicians can establish a functional fitting environment with substantially less fixed infrastructure. This makes the AMTS-03 particularly suited to mobile prosthetic teams, NGO programmes, satellite clinics and high-volume fitting initiatives, where portability, speed and efficient use of equipment are important. Technical Information Reference: AMTS-03 Product type: Complete mobile prosthetic fitting tool set Application: Amparo socket fabrication and fitting Use environments: Clinic, mobile clinic, outreach programme, humanitarian project and prosthetic camp

Read more less

The Amparo Marking Pencil is a simple but essential fitting tool designed to help clinicians clearly define the socket brim line during prosthetic socket fabrication and adjustment. Its contrasting blue and white colour makes markings easy to see on socket materials and fitting surfaces, supporting accurate trimming and consistent contour definition during the Amparo workflow. Key Features Helps define the prosthetic socket brim line Supports accurate trimming and socket contouring Easy-to-see contrasting colour Suitable for use during fitting, molding and adjustment Compact and easy to carry Useful in clinic, workshop and mobile fitting environments Technical Information Reference: PXW Colour: Blue and White Application: Marking and defining socket brim lines The Amparo Marking Pencil provides clinicians with a quick and practical way to identify trim lines clearly before cutting or shaping the socket.

Read more less

The Amparo Majicast is a direct-fit, hydrostatic weight-bearing casting system designed to capture the residual limb under full functional load, helping clinicians create a more accurate and consistent transtibial socket shape in a single session. Instead of relying on traditional plaster casting, Majicast uses the patient’s own body weight together with evenly distributed hydrostatic pressure to support the residual limb during shape capture. This allows the clinician to capture the limb in a condition that more closely reflects how it behaves during real-world prosthetic use. Key Features Hydrostatic weight-bearing shape capture Uses the patient’s body weight to support accurate shaping and load transfer Proprietary soft tissue control helps stabilise distal tissues during fitting Supports more consistent, pressure-balanced socket shapes Reduces variability associated with manual casting techniques Supports rapid progression from check socket to interim or definitive socket Designed specifically for Amparo remouldable sockets Eliminates the need for conventional plaster casting in the Amparo workflow Can reduce material waste through socket remoulding and targeted adjustments Supports digital workflows by allowing the captured socket or shape to be scanned for CAD/CAM and documentation Suitable for clinics, treatment rooms, mobile services and outreach programmes Soft Tissue Control One of the key elements of the Majicast system is its approach to distal soft tissue control. Soft tissue can move or distort when the residual limb is loaded, which can affect the geometry captured during conventional casting. Majicast is designed to stabilise the distal tissues while the patient is weight bearing, helping the clinician create a more anatomically representative and pressure-balanced socket shape. Faster Socket Fitting The actual hydrostatic shape-capture stage typically takes around 2–3 minutes. Depending on the clinic workflow and prosthetic components being used, Amparo states that the pathway to a functional prosthetic device can potentially be completed in under 60 minutes. This makes Majicast particularly valuable for clinics looking to: Reduce repeat appointments Shorten socket delivery times Improve workflow efficiency Standardise fitting between clinicians Provide same-day or single-visit prosthetic services Designed for Mobile and Outreach Prosthetics Majicast does not require electricity or plumbing during operation. It is filled with water from a standard tap and then functions as a closed hydrostatic system. This makes it suitable not only for established prosthetic clinics but also for mobile clinics, humanitarian programmes and prosthetic fitting camps where conventional workshop infrastructure may be limited. Digital Workflow Integration Majicast can also act as a bridge between direct-fit prosthetics and digital manufacturing. Once the weight-bearing shape has been captured, the resulting socket or shape can be 3D scanned and converted into a digital model, supporting CAD/CAM design, documentation and future manufacturing workflows. Technical Information Current application: Transtibial / below-knee fittings Casting time: Approximately 2–3 minutes Majicast weight when empty: Approx. 25 kg Weight when filled: Approx. 55 kg Maximum supported patient weight: 125 kg Power requirement: None Water requirement: Filled from a standard tap System type: Closed hydrostatic weight-bearing casting system Socket compatibility: Designed for Amparo sockets A More Standardised Starting Point for Socket Fit Majicast is designed to make the first stage of socket fabrication more repeatable, functional and efficient. By capturing the residual limb under weight-bearing conditions and combining this with soft tissue control, the system gives prosthetists a consistent starting point for creating a comfortable total-contact socket. For clinics using the wider Amparo system, Majicast acts as the core capital equipment that supports rapid, remouldable and potentially single-visit transtibial socket fitting.

Read more less

The Amparo Stretch Foil Roll is an extra-resistant compression film designed for use during prosthetic socket fitting and residual-limb preparation. The stretch foil is wrapped around the residual limb to provide controlled compression and volume reduction, helping the clinician prepare the limb for socket forming and achieve a more consistent fitting environment. Its strong, highly stretchable construction allows the foil to conform closely to the limb while maintaining the tension required during the Amparo fitting process. Key Features Extra-resistant stretch film for prosthetic fitting Used for compression and reduction of the residual limb Helps create a more consistent limb shape before socket forming Conforms closely to the residual limb Supports controlled circumferential compression Strong and flexible construction Suitable for clinic, workshop and mobile fitting environments Designed for use within the Amparo direct-fit socket workflow Technical Information Reference: PCF Roll length: 150 m Width: 10 cm Application: Residual-limb compression and volume reduction The Amparo Stretch Foil Roll provides a simple and effective way to apply controlled compression during socket preparation, helping clinicians manage residual-limb volume as part of the fitting process.

Read more less

The Amparo Thermo Gloves are protective workshop gloves designed for handling and shaping heated thermoplastic during prosthetic socket fabrication. Their long design helps protect both the hands and wrists, while the close-fitting construction maintains the dexterity needed for controlled socket shaping and finishing. This makes them particularly suitable for direct-forming workflows where clinicians need to work safely with warm thermoplastic while still maintaining good hand control. Made with Para-Aramid and a seamless construction, the gloves provide a practical balance of heat protection, flexibility and comfort for prosthetic workshop use. Key Features Designed for handling heated thermoplastic Long shape helps protect hands and wrists Tight-fitting design supports good dexterity Suitable for shaping prosthetic sockets Made with Para-Aramid Seamless construction for improved comfort Suitable for clinic, workshop and mobile fitting environments Practical protective equipment for Amparo socket fabrication Technical Information Reference: TGL Size: One size – Size 9 Material: Para-Aramid Construction: Seamless Application: Handling and shaping heated thermoplastic The Amparo Thermo Gloves help clinicians work safely and confidently with heated socket materials while maintaining the precision and control required during prosthetic fabrication.

Read more less

The Amparo Textile Scissors are professional-grade cutting scissors designed for prosthetic fabrication and general workshop use. Built to an industry-standard format, they are suitable for cutting textiles as well as heated thermoplastic materials, making them a versatile tool within the Amparo socket fabrication workflow. Their 8 inch / 20 cm length provides good control for precise trimming while remaining compact enough for use in clinic, workshop and mobile fitting environments. Key Features Industry-standard workshop scissors Suitable for cutting textiles Can be used for trimming hot thermoplastic Supports clean and controlled cutting Compact and easy to handle Suitable for prosthetic fabrication and adjustment Useful for clinic, workshop and mobile fitting applications Technical Information Reference: TSC Length: 8 in / 20 cm Application: Textiles and heated thermoplastic materials The Amparo Textile Scissors provide a simple, reliable cutting tool for day-to-day prosthetic fabrication, helping clinicians trim materials accurately throughout the fitting process.

Read more less