The Qaadir Insight G-Line is a 1.6 m high-definition pressure walkway for multi-step gait, static and postural analysis. Its 12,288 resistive sensors cover a 1500 x 500 mm active area, so clinicians can capture several consecutive steps in one pass and see how each foot loads the ground through the whole gait cycle. At just 9 mm thick and 11.8 kg, the composite plate lies flat on any clinic floor, runs from a single USB cable and packs into its own transport bag, making it easy to move between consulting rooms, gait labs and outreach clinics. Data is sampled at up to 200 Hz and can be synchronised with video and EMG for full multi-measurement assessments. The Insight analysis software turns each walk into clear reports, with space-time parameters, Foot Posture Index, centre-of-pressure mapping and stabilometry, helping you plan orthoses, footwear and rehabilitation and show patients measurable progress. Key Features 1.6 m walkway capturing multiple consecutive steps 12,288 resistive HD sensors across a 1500 x 500 mm active area Dynamic, static and postural analysis modules Sampling at up to 200 Hz with live display Roll-off animation and global dynamic pictures, calculations and graphs Simultaneous display of each step with space-time parameters Gait timing, stance-phase timing and complete time/pressure analysis Medio-lateral analysis and pressure mapping with calculations per foot area Foot Posture Index with automatic foot-type detection Numerical and graphic stabilometry, centre-of-pressure mapping and Romberg quotient Synchronisation with video (webcam or digital camera), EMG and other devices 1:1 scale printing and exam comparison Thin, light composite plate with transport bag Technical Characteristics Size (L x W x H): 1610 x 652 x 30 mm Thickness: 9 mm Weight: 11.8 kg Material: Composite Active Sensing Area: 1500 x 500 mm Sensor Type: Resistive HD Number of Sensors: 12,288 Sensor Size: 7.8 x 7.8 mm Pressure Range per Sensor: 0.4 N to 100 N Maximum Load: 300 kg Sampling Rate: Up to 200 Hz PC Interface: USB 2.0 Power Supply: Through USB Synchronisation: 1 input, 1 output Operating Temperature: 0 °C to +85 °C Software: Insight analysis software What's in the Kit Insight G-Line pressure walkway USB cable Transport bag Insight analysis software Typical Applications in Prosthetics & Orthotics Multi-step gait analysis for custom foot orthoses and insoles Diabetic foot pressure assessment and ulcer prevention Prosthetic gait assessment and alignment review Postural assessment and stabilometry, including Romberg testing Sports movements and postural sequences Multi-measurement clinical work combining pressure, video and EMG Before-and-after comparison of orthotic, footwear or prosthetic changes Typical Users Podiatry and foot health clinics Orthotic and prosthetic clinics Hospital rehabilitation and gait laboratories Posturology and balance clinics Sports medicine and physiotherapy practices Universities and research institutes The Qaadir Insight G-Line gives clinics lab-grade, multi-step gait analysis on a walkway that sets up in minutes and travels wherever patients are seen. Download the Qaadir Insight Pressure Scanners Brochure 2026 (PDF)

Read more less

The Qaadir Insight Track is a 2-in-1 gait analysis system: a motorised treadmill with an installable HD pressure plate that also works on the floor as a 1.6 m walkway. Clinicians can measure plantar pressure while the patient stands, walks over the floor or walks and runs on the treadmill, all with one system and one software package. The plate carries 12,288 high-definition resistive sensors across a 1500 x 500 mm active area, sampling at up to 200 Hz. Built on 37 years of development in electronic podometry, the Insight Track adapts to every type of examination, from elite athletes at running speed to older patients at risk of falls, with treadmill speeds from 0.8 to 20 km/h. The Insight analysis software turns each recording into clear visual reports, including a diabetic foot pressure index and ulceration risk level, Foot Posture Index, space-time gait parameters and stabilometry, so you can plan orthoses, footwear and rehabilitation with confidence and show patients the results on screen. Key Features Treadmill with an installable HD pressure plate that doubles as a 1.6 m floor walkway Four acquisition modes: static, dynamic on the floor, posturology and dynamic on the treadmill 12,288 resistive HD sensors across a 1500 x 500 mm active area Walking and running analysis from 0.8 to 20 km/h Sampling at up to 200 Hz Multiple views: thermographic, iso-pressure, 3D, histograms and diagrams, with live display Foot Posture Index (FPI) with automatic foot-type detection, and Center of Pressure Excursion Index (CPEI) Diabetic foot pressure index and ulceration risk level based on the work of David Armstrong Space-time parameters, stance-phase timing, medio-lateral analysis, symmetry, pace and foot angle Stabilometry, sway index, centre-of-pressure butterfly and Romberg quotient Pressure mapping with calculations per foot area and roll-off animation Video synchronisation with up to two cameras, plus EMG and other devices Configurable clinical assessments, customisable reports with PDF export, 1:1 printing and exam comparison Import of patient databases from earlier pressure systems Remote software support Technical Characteristics Treadmill Size (L x H x W): 180 x 153 x 88 cm Treadmill Weight: 125 kg Treadmill Speed: 0.8 to 20 km/h Plate Size (L x W x H): 1610 x 652 x 30 mm Plate Thickness: 9 mm Plate Weight: 11.8 kg Plate Material: Composite Active Sensing Area: 1500 x 500 mm Sensor Type: Resistive HD Number of Sensors: 12,288 Sensor Size: 7.8 x 7.8 mm Pressure Range per Sensor: 0.4 N to 100 N Maximum Load: 300 kg Sampling Rate: Up to 200 Hz PC Interface: USB 2.0 Power Supply (plate): Through USB Synchronisation: 1 input, 1 output (video, EMG and other devices) Operating Temperature: 0 °C to +85 °C Acquisition Modes: Static, dynamic on floor, posturology, dynamic on treadmill Software: Insight analysis software (release 10) What's in the Kit Motorised treadmill Installable HD pressure plate (also usable as a floor walkway) Transport bag for the plate Insight analysis software Typical Applications in Prosthetics & Orthotics Gait and running analysis for custom foot orthoses and insoles Diabetic foot risk assessment and ulcer prevention Footwear assessment and before-and-after orthotic comparison Prosthetic gait assessment and alignment review Fall-risk, balance and posture assessment for older patients Performance testing for athletes, sports movements, injury assessment and return-to-run testing Multi-measurement clinical work combining pressure, video and EMG Clinical research and outcome tracking Typical Users Podiatry and foot health clinics Orthotic and prosthetic clinics Hospital rehabilitation and gait laboratories Posturology and balance clinics Sports medicine centres and running clinics Diabetes and wound care centres Universities and research institutes The Qaadir Insight Track brings treadmill and floor pressure analysis together in one system, giving clinics a complete picture of how patients stand, walk and run, from a single assessment room. Download the Qaadir Insight Pressure Scanners Brochure 2026 (PDF)

Read more less

The Qaadir Insight Mini is a compact, wireless foot pressure (baropodometry) platform that brings plantar pressure assessment into any clinic, pharmacy or outreach setting. Weighing just 0.95kg, it connects by Bluetooth or USB to a smartphone, tablet or PC and displays foot pressure in both static and dynamic modes within seconds. Its 800 resistive sensors cover a 400 x 200mm active area, capturing data at up to 100Hz. The Insight Mini scores diabetic foot risk and highlights the areas most at risk of ulceration, helping clinicians identify high-risk patients early and explain findings visually. Force curves, gait line and left/right and front/back load distribution support orthotic prescription, footwear advice and follow-up. Light, portable and simple to use, it suits podiatrists, orthotists and foot health teams who need reliable pressure data without a full gait lab. Results are saved to a patient database and can be printed or shared as a PDF report in one click. Your browser does not support the video tag. Key Features Static and dynamic plantar pressure display 800 sensors across a 400 x 200mm active area Ultra-light at 0.95kg and only 11mm thick Diabetic foot scoring with ulcer-risk areas highlighted Bluetooth or USB connection Free companion app for Android smartphones and tablets from Google Play Patient database with full history, voice or written notes and photos Force curves, gait line, left/right and anterior/posterior analysis Average and maximum pressure and contact surface measurements Instant PDF reports, one-click printing over Wi-Fi Share results by email, WhatsApp or SMS Sensors rated for more than 1,000,000 actuations Qaadir-branded plate and app Technical Characteristics Size (L x W): 430 x 280mm Thickness (sensor area): 11mm Active Area: 400 x 200mm Weight: 0.95kg Sensor Type: Resistive Sensor Size: 10 x 10mm Number of Sensors: 800 (40 x 20) Maximum Pressure: 100 N/cm² Acquisition Frequency: Up to 100Hz A/D Conversion: 8 bits Sensor Lifetime: More than 1,000,000 actuations Temperature Range: −40°C to +85°C Interface: Bluetooth and USB Power Supply: USB Modes: Static and dynamic acquisition Outputs: Pressure maps, average and maximum pressures, surfaces, force curves, gait line, diabetic foot risk score Reports: Instant PDF, print, email, WhatsApp, SMS Accessories (available separately) Foam positioning frame to help balance both feet Spare cable Spare power adapter Typical Applications in Prosthetics & Orthotics Diabetic foot screening and ulcer prevention Custom foot orthotic and insole prescription Footwear assessment and fitting advice Pre- and post-treatment comparison Sports and running assessments Community and outreach screening programmes Typical Users Podiatry and chiropody clinics Orthotic and prosthetic clinics Diabetes and wound care centres Pharmacies and foot health retailers Sports medicine and physiotherapy practices Mobile and outreach health teams The Qaadir Insight Mini puts fast, visual foot pressure assessment in the palm of your hand, helping clinicians screen diabetic feet, guide orthotic decisions and show patients exactly where their feet are under pressure. Download the Qaadir Insight Pressure Scanners Brochure 2026 (PDF)

Read more less

The Qaadir Fleece Fan Sanding Drum is designed for fine sanding, surface conditioning and finishing in orthotic and prosthetic fabrication workshops. Its flexible fleece flaps follow curved and irregular surfaces, helping produce an even finish while reducing the risk of aggressive material removal. Ideal for final-stage finishing and blending, the drum can be used on plastics, metals and other suitable workshop materials. Key features: 60 mm diameter × 50 mm width Flexible fleece fan construction Provides controlled, consistent surface finishing Suitable for curved, contoured and irregular components Ideal for fine sanding, blending, deburring and polishing preparation Helps remove light marks and surface imperfections Suitable for orthotic and prosthetic workshop applications Designed for use with compatible sanding and polishing machinery Confirm the required grit grade, arbor size and machine compatibility before ordering.

Read more less

The Qaadir Cylindrical Conical Polishing Arbor is designed for mounting polishing wheels, buffs and similar finishing accessories used in orthotic and prosthetic workshops. Its tapered, threaded profile securely grips compatible polishing media while allowing quick installation and replacement. Suitable for use with polishing motors and workshop finishing machines, the arbor supports controlled polishing, smoothing and surface finishing of orthotic and prosthetic components. Key features: Cylindrical mounting shaft with a conical threaded end Securely holds compatible polishing wheels and buffs Enables fast fitting and replacement of polishing accessories Suitable for polishing, smoothing and finishing applications Durable construction for regular workshop use Ideal for orthotic, prosthetic and technical fabrication laboratories Please confirm arbor dimensions, shaft diameter and machine compatibility before ordering.

Read more less

Qaadir Sanding Drums are designed for controlled grinding, shaping and finishing in orthotic and prosthetic workshops. They are suitable for refining the contours and edges of materials used in the fabrication of prosthetic sockets, orthoses, insoles and other custom rehabilitation devices. Available with either an M16 or 5/8-inch mounting connection, the range includes multiple drum diameters and working lengths to accommodate different machinery, components and finishing requirements. The cylindrical profile supports consistent material removal across flat, curved and contoured surfaces. Key Features Suitable for orthotic and prosthetic workshop applications Supports grinding, shaping, edge finishing and surface preparation Useful for working on plastics, foams and other fabrication materials Cylindrical design provides an even working surface Available in different diameters and working lengths Choice of M16 or 5/8-inch mounting connection Compatible with appropriately sized sanding sleeves Suitable for routine use with compatible workshop sanding and grinding machines Always confirm the mounting connection, machine compatibility and required sanding-sleeve dimensions before ordering.

Read more less

The Qaadir Leather Hole Punch Set is designed for producing clean, accurately sized holes in leather, rubber, foam, gasket material and similar workshop materials. It is ideal for orthotic and prosthetic technicians fabricating straps, closures, suspension systems, protective pads and other customised components. The set contains 25 individual hollow punches in graduated sizes from 1 mm to 25 mm, providing the flexibility required for both fine detailing and larger fastening holes. Each punch can be positioned directly over the material and struck with a suitable mallet on a protected cutting surface. Applications: Punching holes in orthotic and prosthetic leather straps Preparing holes for rivets, eyelets, buckles and fasteners Fabricating suspension straps and closure systems Cutting circular openings in rubber, foam and gasket materials Producing washers, spacers and small circular components Features: Complete set of 25 hollow punches Graduated sizes from 1 mm to 25 mm Produces clean and consistent circular holes Suitable for leather, rubber, foam and similar materials Individual punches allow accurate size selection Suitable for professional O&P workshops, footwear workshops and leatherwork Supplied as an organised set for convenient storage and selection Set Contents: 25 leather hole punches Sizes: 1 mm to 25 mm in 1 mm increments

Read more less

The Qaadir Water Exhaust Pump is a practical manual pump designed to remove residual water from plaster separators before the collected plaster or gypsum sludge is disposed of. It is ideal for orthotic and prosthetic workshops, rehabilitation centres and plaster rooms where moulds, casts and fabrication tools are regularly cleaned. Simply insert the pumping tube into the residual water, place the flexible outlet hose into a suitable collection container and operate the pump lever. The manual pumping action transfers the water cleanly and efficiently, making plaster-separator maintenance easier and reducing unnecessary contact with the collected waste. Features: Designed for draining residual water from plaster separators Manual operation with no electrical connection required Pumping tube reaches into the separator chamber Flexible outlet hose directs water into a separate container Helps simplify plaster and gypsum sludge disposal Reduces mess during separator cleaning and maintenance Lightweight and easy to operate Suitable for orthotic, prosthetic and rehabilitation workshops Technical Specifications: Overall length: 480 mm Pump stroke: 135 mm Displacement volume: approximately 100 ml per stroke

Read more less

The Qaadir T-Handle Hex Key is designed for efficient tightening and loosening of hexagonal socket screws during orthotic and prosthetic fabrication, assembly and equipment maintenance. Manufactured from high-grade chrome vanadium steel, it delivers dependable durability and workshop performance. Its ball-ended tip enables angled engagement, providing easier access to screws positioned in confined or difficult-to-reach areas. The ergonomic T-shaped handle offers a secure, comfortable grip while generating additional torque for controlled fastening. High-grade chrome vanadium steel construction Ball end for angled access to hex screws Suitable for confined and difficult-to-reach areas Ergonomic T-shaped handle Provides a strong, secure grip Delivers additional torque for efficient fastening Suitable for O&P assembly, adjustment and workshop maintenance

Read more less

The Qaadir Plumb Bob provides a reliable vertical reference for workshop installation, alignment and layout tasks. Its balanced 250g pointed body suspends from a suitable plumb line, allowing gravity to establish a clear and accurate vertical position. Suitable for aligning equipment, checking upright structures and positioning workshop fixtures in orthotic and prosthetic facilities, rehabilitation centres and technical training environments. Weight: 250g Tapered body with a defined reference point Provides a simple, reliable vertical reference Suitable for equipment installation, alignment and layout work Compact and easy to store in a workshop toolbox Designed for use with a suitable plumb line

Read more less

The Qaadir Engineers’ Hammer is a versatile workshop tool designed for controlled striking, assembly and general metalworking tasks in orthotic and prosthetic fabrication. Its balanced 300g forged-steel head provides effective striking force while remaining comfortable for precise bench work. The flat, ground striking face is suitable for driving pins, nails and small fittings, while the cross-peen end supports more focused striking, shaping and adjustment work. A lacquered hardwood handle provides a secure, comfortable grip and incorporates a protective sleeve at the hammer head. Head weight: 300g Overall length: approximately 305mm Head length: approximately 105mm Forged C45 tool-steel head Induction-hardened striking-face edges Flat striking face with cross-peen end Lacquered hardwood handle Protective handle sleeve and secure ring-wedge fixing Manufactured in accordance with DIN 1041 Suitable for O&P workshops, rehabilitation centres and technical training facilities

Read more less

Qaadir Flat File 200 × 20 × 5 mm – Fine, Medium or Coarse The Qaadir Flat File is a durable workshop hand tool designed for the controlled shaping, smoothing and finishing of materials used in orthotic and prosthetic fabrication. Its flat profile provides a consistent working surface for refining edges, reducing excess material and completing general bench-work tasks. Available in three cutting grades, the file can be selected according to the required level of material removal and surface finish: Fine – for precision finishing and final smoothing Medium – for general-purpose shaping and surface preparation Coarse – for faster removal of excess material and initial shaping Dimensions: 200 × 20 × 5 mm Supplied without a handle Suitable for O&P workshops, rehabilitation centres and technical training facilities

Read more less

Professional 250 mm backsaw designed for accurate, controlled cutting in prosthetic, orthotic and general workshop fabrication. The Qaadir Backsaw 250 mm combines a rigid, reinforced blade design with precision-ground teeth to provide clean, controlled cuts. Its compact size makes it particularly useful for detailed workshop tasks where accuracy and stability are more important than the long cutting stroke of a conventional handsaw. Manufactured with a high-quality carbon steel blade, the saw provides a strong, well-balanced cutting platform, while the reinforced back helps minimise blade flex during use. The soft-grip handle provides comfortable, secure control during repetitive fabrication work. Key Features 250 mm Blade Length: Compact size for accurate and controlled workshop cutting. Precision-Ground Teeth: Designed to produce clean, efficient cuts. Carbon Steel Blade: Strong and durable construction for regular professional use. Reinforced Back: Helps maintain blade rigidity and minimise bending during cutting. Smooth Cutting Action: Solid, well-balanced construction supports controlled sawing. Soft-Grip Handle: Provides a comfortable and secure grip for improved cutting control. Compact & Manoeuvrable: Particularly suitable for smaller components and precision fabrication tasks. P&O Workshop Application: Ideal for cutting wood, model-making materials and other suitable workshop materials during prosthetic and orthotic fabrication. Technical Specifications Specification Details Product Qaadir Backsaw Type Backsaw / tenon saw Blade Length 250 mm Blade Material Carbon steel Teeth Precision ground Handle Ergonomic soft grip Operation Manual Application Precision cutting and fabrication Primary Use Prosthetic & orthotic workshops The Qaadir Backsaw 250 mm provides the blade rigidity, cutting accuracy and comfortable handling required for precise everyday fabrication work in professional P&O workshops. The specification is based on the referenced 250 mm saw, which confirms the carbon-steel blade, precision-ground teeth, soft-grip handle and rigid, balanced construction. Qaadir — professional workshop tools for prosthetic and orthotic fabrication.

Read more less

Wall-mounted emergency eye wash station providing rapid access to sterile saline solution for immediate eye irrigation following exposure to dust, debris or other workplace contaminants. The Qaadir Eye Wash Station is designed for prominent installation in prosthetic and orthotic workshops, plaster rooms, fabrication laboratories and other technical work areas where airborne particles or contaminants may present a risk to the eyes. The durable enclosed cabinet contains two 500 ml sterile 0.9% sodium chloride eye wash bottles, keeping emergency supplies clean, protected and immediately accessible when required. The cabinet incorporates a quick-release wall bracket, allowing the complete unit to be removed and carried directly to the user if necessary. Key Features 2 × 500 ml Eye Wash Bottles: Provides a total of 1 litre of sterile saline eye wash solution. Sterile 0.9% Saline Solution: Suitable for emergency irrigation of the eyes and general wound washing. Enclosed Protective Cabinet: Helps protect emergency supplies from workshop dust, dirt and contamination. Wall-Mounted Design: Keeps the eye wash station clearly positioned and readily accessible in an emergency. Quick-Release Bracket: Allows the complete station to be rapidly removed from the wall and taken to the affected person. Integrated Carry Handle: Enables convenient portable use when required. Bottle Stabilisers: Hold the eye wash bottles securely within the cabinet during storage and transport. Hinged Case: Provides rapid access while keeping the contents organised and protected. Self-Supporting Design: The opened case can provide a convenient working platform while remaining on its wall bracket. Eye Dressings Included: Supplied with two sterile eye dressings for additional first-aid provision. Ideal for P&O Workshops: Particularly relevant around grinding, routing, drilling, sanding, plaster preparation and other fabrication processes where dust and particles may be generated. Technical Specifications Specification Details Product Qaadir Eye Wash Station Mounting Wall mounted / portable via quick-release bracket Eye Wash 2 × 500 ml Total Solution 1 litre Solution Sterile 0.9% saline Eye Dressings 2 sterile dressings Cabinet Durable moulded plastic Closure Hinged Carry Handle Yes Application Emergency eye irrigation Primary Use P&O workshops, laboratories and technical work areas Station Contents 2 × 500 ml sterile 0.9% saline eye wash bottles 2 × sterile eye dressings Protective eye wash cabinet Quick-release wall mounting bracket Eye wash identification label. The Qaadir Eye Wash Station provides a clearly identifiable and readily accessible emergency eye-care point for professional prosthetic and orthotic fabrication environments. Qaadir — practical professional safety equipment for prosthetic and orthotic workshops.

Read more less

The Qaadir Ear Protectors provide dependable passive hearing protection for orthotic and prosthetic workshops, fabrication laboratories and other environments where technicians are exposed to machinery and high noise levels. With a Single Number Rating of SNR 33 dB, the earmuffs help reduce exposure to potentially harmful workplace noise while supporting comfort during extended periods of use. Thick, sound-absorbing foam inside the ear cups combines with cushioned sealing rings to create a close fit around the ears. The adjustable reinforced headband and rotating ear cups accommodate different head sizes and help distribute pressure evenly. Key Features High-performance passive hearing protection Noise reduction rating: SNR 33 dB Noise Reduction Rating: NRR 28 dB Tested in accordance with ANSI S3.19 Multi-layer noise-dampening foam Cushioned ear seals for a close, comfortable fit Generously sized internal ear-cup space Reinforced metal headband for durability Retractable stainless-steel adjustment arms 360° rotating ear cups Adjustable fit for a wide range of users Padded headband for improved wearing comfort Lightweight, low-profile construction Compact folding design for storage and transport No batteries or electronic components required O&P Workshop Applications Operating routers and socket grinders Sanding and polishing prosthetic components Cutting thermoplastic sheet materials Working with band saws, drilling machines and milling equipment Using workshop extraction and compressed-air systems Carbon-composite trimming and finishing General workshop maintenance Other high-noise fabrication procedures The Qaadir Ear Protectors are a practical item of personal protective equipment for technicians working around intermittent or continuous machinery noise. Their adjustable design provides a secure fit while the padded headband and spacious ear cups support comfort throughout routine workshop activities. For effective protection, ensure that the ear cushions form a complete seal around both ears. Hearing protection should be selected following a workplace noise assessment and used in accordance with the applicable occupational safety requirements.

Read more less

Professional anti-fog safety goggles providing comfortable, enclosed eye protection against dust, airborne particles, impact, mist and splashes during prosthetic and orthotic fabrication. The Qaadir Anti-Fog Safety Goggles are designed for demanding P&O workshop environments where grinding, sanding, routing, drilling, plaster work and other fabrication processes can expose the eyes to dust, particles and debris. The flexible wraparound design provides a close, comfortable fit around the face while maintaining good peripheral vision. An indirect ventilation system combined with an anti-fog lens coating helps maintain clear visibility during prolonged workshop use. The design is also suitable for wearing over most prescription spectacles. Key Features Anti-Fog Lens: Special interior coating helps minimise condensation and maintain clear vision during extended use. Anti-Scratch Exterior: Protective outer lens coating improves resistance to scratching during everyday workshop use. Enclosed Eye Protection: Close-fitting design helps protect against dust, airborne particles, mist, splashes and impact. Indirect Ventilation: Promotes airflow while helping minimise the entry of workshop debris and reducing lens fogging. OTG – Over-the-Glasses Design: Designed to fit comfortably over most prescription eyewear. Wide Field of Vision: Wraparound lens provides good peripheral visibility while working with machinery and hand tools. Flexible Face Seal: Soft body conforms comfortably to the face and helps provide a secure, gap-reducing fit. Adjustable Headband: Allows the goggles to be securely adjusted for different users. Replaceable Lens Design: Enables the lens to be replaced when required rather than replacing the complete goggle. P&O Workshop Protection: Ideal for use during plaster rectification, sanding, grinding, drilling, routing, cutting and other fabrication processes. Technical Specifications Specification Details Product Qaadir Anti-Fog Safety Goggles Lens Clear Lens Treatment Anti-fog interior / anti-scratch exterior Ventilation Indirect ventilation Design Wraparound, enclosed safety goggle OTG Compatible Yes – suitable over most prescription glasses Headband Adjustable Protection Impact, dust, airborne particles, mist and splash Application P&O fabrication and general workshop eye protection

Read more less

The Qaadir Hot Air Gun Accessories Kit is a comprehensive professional set designed to extend the versatility and precision of compatible hot air guns. It provides a selection of specialised nozzles, scraping tools and replacement blades for controlled heating, thermoplastic forming, plastic welding, finishing and repair work. Ideal for orthotic and prosthetic workshops, the different nozzle profiles allow technicians to concentrate, distribute, deflect or reflect the airflow according to the material and fabrication task. The kit is particularly useful when making local adjustments to thermoplastic orthoses, finishing fabricated components and completing general workshop maintenance. Kit Contents 1 × 75 mm surface nozzle 1 × 75 mm window-protection nozzle 1 × 14 mm reduction nozzle 1 × 9 mm reduction nozzle 1 × wide-slit nozzle 1 × plastic-welding nozzle 1 × 24 mm reflector nozzle 1 × scraper 1 × blade holder 3 × replacement blades Accessory Applications 75 mm surface nozzle: Distributes hot air across a broad area for evenly heating larger thermoplastic surfaces. 75 mm window nozzle: Deflects heat away from adjacent temperature-sensitive surfaces. 14 mm reduction nozzle: Concentrates airflow for controlled local heating and detailed fabrication. 9 mm reduction nozzle: Provides a narrow, focused stream for precision work. Wide-slit nozzle: Produces a flat curtain of hot air for sheet materials and overlapping seams. Welding nozzle: Directs heat for compatible plastic-welding applications. 24 mm reflector nozzle: Wraps heat around tubing and curved components for more even heating. Scraper and blades: Assist with removing softened adhesives, coatings and surface residues. Key Features Complete 12-piece professional accessory set Expands the functionality of compatible hot air guns Supports broad-area and precision heating Suitable for thermoplastic forming and modification Includes accessories for plastic welding and scraping Multiple reduction nozzles for controlled airflow Replaceable scraper blades Compact and convenient workshop set Net weight: approximately 437 g O&P Workshop Applications Local modification of thermoplastic orthoses Controlled heating of polypropylene and polyethylene components Edge finishing and contour adjustment Heating and forming tubing or curved parts Plastic welding and seam finishing Softening and removing adhesives Removing coatings and fabrication residues General workshop repair and maintenance The Qaadir Hot Air Gun Accessories Kit is the ideal companion to the Qaadir Hot Air Gun, giving O&P technicians greater control over airflow direction, concentration and coverage for a broad range of fabrication tasks. Always allow accessories to cool completely before removal or storage. Use suitable protective gloves and operate hot air equipment in a well-ventilated workspace.

Read more less

The Qaadir Hot Air Gun is a powerful, digitally controlled professional heat gun designed for precise heating, shaping and finishing applications in orthotic and prosthetic workshops. Its continuously adjustable temperature range makes it particularly suitable for working with temperature-sensitive thermoplastics, where controlled and repeatable heat application is essential. A clear LCD display shows the selected temperature, while joystick control enables adjustment in precise 10°C increments. Two airflow settings allow the technician to select concentrated or higher-volume hot air according to the material and application. Key Features Professional 2300 W hot air gun Continuously adjustable temperature from 80°C to 650°C Precise temperature adjustment in 10°C increments Two-stage airflow control Airflow range: 150–500 litres per minute Clear LCD temperature display Three programmable settings for recurring applications Eco timer adjustable from 10 to 1,990 seconds Automatic energy-saving function Residual-heat indicator High-quality ceramic heating element Electronic temperature control Thermal cut-out and thermostat protection Compatible with interchangeable hot-air nozzles Integrated hanging facility Long 3 m power cable for flexible workshop use Supplied in a protective folding box Technical Specifications Power output: 2300 W Electrical supply: 220–230 V, 50–60 Hz Temperature range: 80–650°C Airflow: 150–500 l/min Temperature adjustment: 10°C increments Control: joystick Display: LCD Cable length: 3 m Dimensions: 253 × 87 × 200 mm Weight: approximately 1.02 kg Nozzle receiver: 34 mm O&P Workshop Applications Localised heating of thermoplastic orthoses Edge finishing and minor fit adjustments Shaping and modifying plastic components Heating selected areas during socket fabrication Plastic welding and repair work Forming heat-shrink tubing Softening adhesives and releasing bonded joints General technical fabrication and maintenance The programmable settings help technicians reproduce frequently used temperature and airflow combinations, improving consistency during repetitive fabrication procedures. The Eco timer can automatically reduce unnecessary operation, helping conserve energy and protect the tool during busy workshop use. Always use appropriate temperature settings for the material being processed. Operate the heat gun in a well-ventilated environment and keep it away from flammable materials.

Read more less

The Qaadir Tripod is a robust aluminium construction tripod designed for secure and accurate positioning of rotation lasers, line lasers and other compatible measuring instruments. Its integrated lifting column provides precise height adjustment, making it particularly useful for alignment, measurement and installation work in orthotic and prosthetic workshops, clinics and technical environments. The air-cushioned lifting mechanism allows the mounted instrument to move smoothly when the column is released, bringing it to a gentle stop and helping protect sensitive laser equipment. A rapid leg-locking system enables quick setup and accurate positioning, including on uneven surfaces. Key Features Durable aluminium tripod construction Integrated lifting column for precise height adjustment Adjustable working height from approximately 98 to 220 cm Air-cushioned column movement for controlled positioning Compatible with rotation lasers and line lasers Standard 5/8-inch threaded mounting screw Rapid-locking legs for quick setup Stable positioning on level or uneven surfaces Removable tripod head for convenient assembly and transport High-quality chain spread limiter Suitable for indoor and outdoor use Versatile Tripod Feet Each tripod leg incorporates a ground spike and a rotatable hard-rubber shoe: Ground spikes provide secure positioning on soil and other outdoor surfaces Rubber shoes improve grip and help prevent scratches on indoor flooring Typical Applications Laser alignment in orthotic and prosthetic workshops Establishing vertical and horizontal reference lines Positioning patients or equipment during alignment procedures Workshop machinery installation and levelling Clinic and laboratory layout work Construction, maintenance and technical installation Indoor and outdoor measurement tasks The Qaadir Tripod combines a broad height-adjustment range with dependable stability and controlled movement, providing a reliable platform for professional laser measurement and alignment equipment.

Read more less

The Qaadir First Aid Kit provides a compact and practical selection of essential first aid supplies for clinics, rehabilitation centres, orthotic and prosthetic workshops, offices and other low-risk workplaces. Its contents are arranged to meet the requirements of BS 8599-1 for workplace first aid kits, supporting an organised response to common minor injuries and workplace emergencies. The durable hinged case protects the contents during storage and is clearly marked “FIRST AID” with the internationally recognised white cross for rapid identification. An integrated carrying handle allows the kit to be taken directly to the casualty when required. Key Features Small, fully stocked workplace first aid kit Contents compliant with BS 8599-1 requirements Suitable for clinics, workshops, offices and other low-risk workplaces Durable hinged plastic case Clearly marked “FIRST AID” in English Internationally recognised white-cross identification Integrated handle for convenient transport Compact design for efficient storage Organised contents for quick access during an emergency Dimensions: approximately 270 × 170 × 90 mm Kit Contents 1 first aid guidance leaflet 2 medium first aid dressings, 120 × 120 mm 2 large first aid dressings, 180 × 180 mm 2 triangular bandages 2 sterile eye dressings 40 washproof adhesive plasters 20 sterile cleansing wipes 1 roll of microporous tape, 25 mm 6 pairs of nitrile examination gloves 2 finger dressings 1 CPR face shield 1 emergency foil blanket 1 burn dressing, 100 × 100 mm 1 pair of clothing cutters 1 conforming bandage, 75 mm Suitable Applications Orthotic and prosthetic clinics O&P fabrication workshops Rehabilitation centres Medical and therapy practices Offices and administrative facilities Training rooms and educational facilities Mobile service and fieldwork teams General workplace emergency preparedness The appropriate number and size of first aid kits should be selected following a workplace risk assessment. Contents should be inspected regularly and replaced immediately after use or when an item reaches its expiry date.

Read more less

The Qaadir Countersink Set is a professional six-piece HSS cutting set designed for clean, accurate countersinking and deburring in metal, plastic and other fabrication materials. The three-flute cutting geometry produces smooth, chatter-free results, making the set ideal for preparing holes for countersunk screws, removing burrs and finishing drilled components. Suitable for orthotic and prosthetic workshops, engineering departments, maintenance teams and general fabrication environments, each countersink features a long cylindrical shank for secure mounting and improved access. The tools deliver their best results when operated at low cutting speeds. Key Features Six-piece HSS countersink set Sizes: 6.3, 8.3, 10.4, 12.4, 16.5 and 20.5 mm Manufactured from high-speed steel 90° countersinking angle Three cutting edges for smooth, controlled cutting Type C design in accordance with DIN 335 Long cylindrical shanks Right-hand cutting direction Sharp, precision-ground flutes Designed for burr-free and chatter-free performance Supplied in a durable storage case Suitable Materials Steel up to 900 N/mm² Aluminium Brass Plastics Bronze Cast iron Typical Applications Countersinking holes for flush-mounted screws Deburring drilled holes and cut edges Finishing metal workshop components Preparing brackets, fixtures and fabrication assemblies Orthotic and prosthetic workshop maintenance General engineering and technical fabrication The Qaadir Countersink Set combines the six most useful workshop sizes in one organised set, providing reliable performance for routine professional drilling and finishing work.

Read more less

Professional 44-piece HSS metric thread-cutting set for creating, repairing and restoring internal and external threads in prosthetic, orthotic and general workshop applications. The Qaadir Tap & Die Set – 44 Piece provides a comprehensive selection of professional hand taps, dies, core drill bits and thread-cutting accessories covering the commonly used metric sizes from M3 to M12. Manufactured from High-Speed Steel (HSS), the cutting tools provide the hardness, cutting performance and wear resistance required for regular workshop use. The set is particularly useful for fabrication, equipment maintenance, component modification and repairing damaged threads within a P&O workshop. Each thread size includes a three-piece hand tap set, allowing threads to be progressively cut by hand for controlled and accurate results. The corresponding HSS dies provide the capability to produce or restore external threads. Key Features 44-Piece Professional Set: Comprehensive solution for internal and external metric thread cutting. Metric Range M3–M12: Covers seven commonly required workshop thread sizes. HSS Hand Taps: Includes 21 HSS taps manufactured to DIN 352. Three Taps per Size: Progressive three-piece hand tap sets for M3, M4, M5, M6, M8, M10 and M12. HSS-G Dies: Seven ground HSS dies manufactured to DIN 223 B, covering M3 through M12. Matching Core Drill Bits: Includes seven correctly sized HSS-G drill bits for preparing the tapping holes. Die Holders: Five sizes for securely holding the supplied threading dies. Tap Wrenches: Two hand tap wrenches provide controlled manual thread cutting. Thread Gauge: Included for identifying and checking thread pitch. Screwdriver Included: Provides an additional tool for adjustment of the supplied holders. Metal Storage Case: Keeps the complete set organised, protected and readily accessible. P&O Workshop Application: Ideal for fabrication jigs, machinery, fixtures, prosthetic and orthotic components and general equipment maintenance. Thread Sizes M3 / M4 / M5 / M6 / M8 / M10 / M12 Core Drill Sizes The set includes the corresponding HSS-G tapping drill sizes: Ø2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm. Set Contents Component Quantity / Sizes HSS Hand Taps DIN 352 21 pcs – 3 each in M3, M4, M5, M6, M8, M10, M12 HSS-G Dies DIN 223 B 7 pcs – M3, M4, M5, M6, M8, M10, M12 HSS-G Core Drill Bits 7 pcs – Ø2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm Die Holders 5 pcs – 20×5, 20×7, 25×9, 30×11, 38×14 mm Tap Wrenches 2 pcs – No. 1 & No. 2 Thread Gauge 1 pc Screwdriver 1 pc Storage Metal case Total 44 pieces The Qaadir 44 Piece HSS Tap & Die Set provides P&O technicians with a complete professional solution for producing new threads, restoring damaged threads and carrying out routine fabrication and workshop maintenance. Qaadir — practical professional tools for prosthetic and orthotic fabrication.

Read more less

The Qaadir Punch Set is a versatile six-piece workshop tool set designed for marking, driving, separating and shaping metal components. It provides orthotic and prosthetic technicians with a practical selection of taper punches, chisels and a centre punch for fabrication, repair and general workshop tasks. Manufactured from high-alloy tool steel, each tool features a polished working end for accurate contact and dependable performance. The complete set is supplied in a compact metal storage case, keeping the tools protected, organised and readily accessible at the workbench or in a mobile workshop. Applications Marking drilling positions in metal components Driving out pins, rivets and fastening elements Cutting and separating light metal sections Creating narrow grooves and channels Removing excess material during fabrication General maintenance and repair of O&P workshop equipment Set Contents 1 × taper punch, 3 mm tip 1 × taper punch, 4 mm tip 1 × centre punch, 4 mm tip 1 × crosscut chisel, 125 mm 1 × flat cold chisel, 125 mm 1 × flat cold chisel, 150 mm 1 × metal storage case Key Features Six-piece punch and chisel set High-alloy tool-steel construction Polished working ends Suitable for metalworking and general fabrication Multiple punch and chisel profiles for common workshop tasks Compact, durable metal case Organised storage and convenient portability Suitable for orthotic, prosthetic and rehabilitation workshops Technical Information Number of tools: 6 Tool types: taper punches, centre punch, crosscut chisel and flat cold chisels Material: high-alloy tool steel Finish: polished working ends Case dimensions: approximately 180 × 115 × 25 mm Set weight: approximately 702 g Supplied in: metal storage case For safety, always wear suitable eye protection and select an appropriate hammer and workpiece support when using striking tools.

Read more less

Professional 25-piece High-Speed Steel drill bit set covering sizes from 1 mm to 13 mm for accurate drilling across a wide range of prosthetic, orthotic and general workshop applications. The Qaadir HSS Drill Bit Set provides a comprehensive selection of metric drill sizes for everyday fabrication, assembly, modification and maintenance tasks. Manufactured from High-Speed Steel (HSS), the drill bits combine hardness, wear resistance and heat resistance for dependable professional workshop performance. With 25 sizes ranging from 1 mm to 13 mm in 0.5 mm increments, the set provides technicians with a convenient selection for drilling different hole diameters without needing to purchase individual bits. Key Features 25-Piece Set: Comprehensive selection of commonly required metric drill sizes. 1–13 mm Range: Suitable for both precision drilling and larger workshop holes. 0.5 mm Increments: Provides excellent size coverage across the complete range. High-Speed Steel (HSS): Offers good hardness, durability and resistance to heat generated during drilling. Twist Drill Design: Efficient cutting geometry and flute design assist material removal during drilling. Straight Shank: Compatible with standard drill chucks of the appropriate capacity. Versatile Material Compatibility: Suitable for drilling metals, plastics, wood and other appropriate workshop materials when used with the correct speed and technique. Organised Storage: Supplied as a complete set for convenient size identification, storage and workshop access. P&O Workshop Essential: Ideal for fabrication, machinery maintenance, component assembly, jigs, fixtures and general technical work. Included Sizes 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 12.5 / 13 mm Technical Specifications Specification Details Product Qaadir HSS Drill Bit Set Number of Pieces 25 Size Range 1–13 mm Size Increments 0.5 mm Material High-Speed Steel (HSS) Drill Type Twist drill Shank Straight Application Drilling, fabrication, assembly and maintenance Primary Use Prosthetic & orthotic workshops The Qaadir HSS Drill Bit Set 25 Piece provides the essential metric sizes required for routine drilling tasks in a professional P&O fabrication environment. Qaadir — practical professional tools for prosthetic and orthotic fabrication.

Read more less