nora® Lunatec combiCAD 2 is a multilayer expanded EVA milling sheet designed for CAD CAM fabrication in orthotics, prosthetics, and orthopaedic footwear production. This composite material combines three different EVA qualities that are vulcanised together during the manufacturing process, creating a strong and reliable milling blank without the need for adhesive bonding between layers. The combiCAD construction provides excellent milling behaviour together with optimised functional properties. Because the layers are permanently fused during production, the material offers consistent structure, high strength, and clean machining without irregularities caused by glue layers. This results in improved durability, better surface quality, and reliable mechanical performance in finished orthotic devices. Material construction Top stabilising layer Material: stabilising EVA layer Colour: 81 black Thickness: approx. 3 mm Middle cushioning layer Material: nora® Lunasoft Z Hardness: approx. 25 Shore A Density: approx. 0.16 g/cm³ Colour: 131 red Thickness: approx. 7 mm Base milling layer Material: nora® Lunatec CAD 35 Hardness: approx. 35 Shore A Density: approx. 0.17 g/cm³ Colour: 70 yellow Thickness: approx. 25 mm Total thickness approx. 35 mm Formats approx. 1120 × 750 mm (44.1 inch × 29.5 inch) approx. 1500 × 1120 mm (59 inch × 44.1 inch) Intended applications CAD CAM milled foot orthotics Composite orthotic blanks Functional footbeds with integrated cushioning Orthopaedic footwear components Structural and comfort combination insoles Digital orthotic production Central fabrication workflows High performance orthotic builds Key properties Composite EVA sheet vulcanised during manufacture No adhesive layers between materials Excellent milling behaviour Clean cutting with smooth surface finish High tensile strength and elongation Consistent material structure No irregularities from glue layers Strong internal bonding Reliable replication in CAD CAM production Optimised combination of cushioning and stability Advantages of combiCAD construction Stronger than bonded multilayer sheets No risk of delamination Improved machining accuracy Reduced production time Consistent quality in automated milling Durable finished orthoses Ideal for central fabrication and digital workflows Processing notes Designed for CNC and CAD CAM milling machines No bonding required between internal layers Can be bonded to other EVA materials using standard adhesives Use correct tool speed and feed for best surface finish nora® Lunatec combiCAD 2 is an ideal composite milling material for orthotic, prosthetic, and orthopaedic footwear workshops requiring a multilayer EVA blank with excellent machining performance, integrated cushioning, and reliable structural stability for modern CAD CAM fabrication.

Read more less

nora® Lunatec combiCAD 1 is an advanced multilayer expanded EVA milling sheet developed for CAD CAM fabrication in orthotics, prosthetics, and orthopaedic footwear production. This innovative composite material combines three different EVA qualities vulcanised together during the manufacturing process, creating a stable, high performance milling blank without the need for adhesive bonding between layers. The combiCAD construction is designed to combine the excellent milling behaviour of nora® Lunatec CAD materials with the functional advantages of vulcanised composite sheets. Because the layers are permanently fused during production, the material provides superior strength, consistent structure, and clean machining without irregularities caused by glue layers. This results in improved durability, better surface quality, and reliable mechanical performance in finished orthotic devices. Material construction Top stabilising layer Material: stabilising EVA layer Colour: 80 anthracite Thickness: approx. 2 mm Middle cushioning layer Material: nora® Lunasoft SLW Hardness: approx. 30 Shore A Density: approx. 0.20 g/cm³ Colour: 137 terra Thickness: approx. 6 mm Base milling layer Material: nora® Lunatec CAD 45 Hardness: approx. 45 Shore A Density: approx. 0.22 g/cm³ Colour: 56 stone grey Thickness options: approx. 24 mm or approx. 32 mm Formats approx. 1120 × 740 mm (44.1 inch × 29.1 inch) approx. 1480 × 1120 mm (58.2 inch × 44.0 inch) Intended applications CAD CAM milled foot orthotics Composite orthotic blanks Functional footbeds with integrated cushioning Orthopaedic footwear components Structural and comfort combination insoles Central fabrication workflows Digital orthotic production High performance orthotic builds Key properties Composite EVA sheet vulcanised during manufacture No adhesive layers between materials Excellent milling behaviour Clean cutting with smooth surface finish High tensile strength and elongation values Consistent material structure No irregularities caused by glue layers Stable bonding between layers Optimised functional performance Reliable replication in CAD CAM production Advantages of combiCAD construction Stronger than bonded multilayer sheets No risk of layer separation Improved machining accuracy Better durability in finished orthoses Reduced production time Consistent quality in automated milling Ideal for central fabrication Processing notes Designed for CNC and CAD CAM milling machines No additional bonding required between layers Can be bonded to other EVA materials using standard adhesives Use appropriate tool speed and feed for best results nora® Lunatec combiCAD 1 is an ideal composite milling material for orthotic, prosthetic, and orthopaedic footwear workshops requiring a high quality multilayer EVA blank with excellent machining properties, strong internal bonding, and reliable performance in modern CAD CAM production systems.

Read more less

nora® Lunatec CAD 25 is a soft expanded EVA sheet developed for CAD CAM milling applications where high cushioning performance and precise machining are required. With a hardness of approximately 25 Shore A and a density of around 0.12 g/cm³, this material provides excellent comfort, flexibility, and elastic recovery while maintaining sufficient stability for accurate CNC milling. It is ideal for soft orthotic insoles, comfort footbeds, and lightweight orthopaedic footwear components produced using digital workflows. The uniform closed cell structure ensures clean cutting, smooth surface finish, and minimal tearing during machining. Trimmed edges allow accurate positioning in milling machines, making Lunatec CAD 25 suitable for both in clinic production and central fabrication environments. Material specification Hardness: approx. 25 Shore A Density: approx. 0.12 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1150 × 750 mm (45.3 inch × 29.5 inch) approx. 1500 × 1150 mm (59.0 inch × 45.3 inch) Colour and thickness 07 beige — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Soft milling blanks for insoles Comfort footbeds Cushioning orthotic components Orthopaedic footwear midsoles Lightweight orthotic constructions Prosthetic and orthotic build ups Digital orthotic production workflows Key properties Soft EVA with good machining stability Excellent cushioning and comfort Clean milling with smooth finish Uniform material structure Reduced tearing during machining Lightweight and flexible Suitable for thick milling blanks Hygienic closed cell material Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use correct tool speed and feed to achieve best surface quality nora® Lunatec CAD 25 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft milling EVA that combines high comfort, reliable machining performance, and consistent quality for modern CAD CAM fabrication.

Read more less

nora® Lunatec CAD 30 is a soft expanded EVA sheet designed for CAD CAM milling applications where cushioning, flexibility, and precision machining are required. With a hardness of approximately 30 Shore A and a density of around 0.15 g/cm³, this material provides excellent comfort properties while maintaining sufficient stability for accurate CNC machining. It is well suited for milled orthotic insoles, comfort footbeds, and lightweight orthopaedic footwear components. The uniform closed cell structure allows smooth cutting with minimal tearing, producing clean edges and consistent surface quality. Trimmed edges ensure accurate alignment in milling machines, making the material ideal for both in clinic and central fabrication digital workflows. Material specification Hardness: approx. 30 Shore A Density: approx. 0.15 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1100 × 700 mm (43.3 inch × 27.5 inch) approx. 1400 × 1100 mm (55.0 inch × 43.3 inch) Colour and thickness 80 anthracite — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Cushioning orthotic components Soft footbeds and comfort insoles Orthopaedic footwear midsoles Prosthetic and orthotic build ups Custom footbeds produced by CNC milling Digital orthotic production workflows Key properties Soft EVA with good machining stability Excellent cushioning performance Clean milling with smooth finish Uniform material structure Reduced tearing during cutting Lightweight with good elasticity Suitable for thick milling blanks Hygienic closed cell material Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use correct tool speed and feed to achieve optimal surface finish nora® Lunatec CAD 30 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft milling EVA that combines comfort, precision machining, and consistent quality in modern CAD CAM fabrication systems.

Read more less

nora® Lunatec CAD 35 is a medium soft expanded EVA sheet developed for CAD CAM milling in orthotics, prosthetics, and orthopaedic footwear fabrication. With a hardness of approximately 35 Shore A and a density of around 0.20 g/cm³, this material offers a combination of flexibility, cushioning, and dimensional stability, making it ideal for milled insoles, orthotic blanks, and comfort focused components. The material features a uniform closed cell structure that allows clean machining with smooth surface finish and minimal tearing. Trimmed edges ensure accurate positioning in CNC and CAD CAM milling systems, supporting consistent results in both in clinic and central fabrication workflows. Material specification Hardness: approx. 35 Shore A Density: approx. 0.20 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1160 × 770 mm (45.6 inch × 30.3 inch) approx. 1540 × 1160 mm (60.6 inch × 45.6 inch) Colour and thickness 60 bright grey — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Cushioning orthotic components Orthopaedic footwear midsoles Prosthetic and orthotic build ups Custom footbeds produced by CNC milling Digital orthotic workflows Central fabrication production Key properties Smooth and clean milling performance Good flexibility with reliable stability Excellent cushioning characteristics Uniform material structure Reduced tearing during machining Suitable for thick milling blanks Consistent results in automated production Hygienic closed cell EVA Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use appropriate tool speed and feed to achieve best surface finish nora® Lunatec CAD 35 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a softer milling EVA with good comfort, reliable machining quality, and consistent performance in modern CAD CAM production systems.

Read more less

nora® Lunatec CAD 45 is a precision expanded EVA sheet developed for CAD CAM milling in orthotics, prosthetics, and orthopaedic footwear production. With a hardness of approximately 45 Shore A and a density of around 0.22 g/cm³, this material provides an excellent balance of stability, elasticity, and machining performance, making it ideal for milled orthotic blanks, insoles, and structural footwear components. The uniform closed cell structure allows clean milling with smooth surface finish and minimal tearing, while the trimmed edges ensure accurate positioning and reliable clamping in CNC and CAD CAM systems. Lunatec CAD 45 is particularly suited for workshops and central fabrication facilities requiring consistent quality in digital production workflows. Material specification Hardness: approx. 45 Shore A Density: approx. 0.22 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1080 × 710 mm (42.5 inch × 27.9 inch) approx. 1420 × 1080 mm (55.8 inch × 42.5 inch) Colour and thickness 09 white — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Orthopaedic footwear components Prosthetic and orthotic build ups Custom footbeds produced by CNC milling Structural midsole elements Central fabrication production Digital orthotic workflows Key properties Excellent milling behaviour Clean cutting with smooth finish Good dimensional stability Balanced firmness and flexibility Uniform material structure Reliable strength for orthotic builds Suitable for thick milling blanks Hygienic closed cell EVA Processing notes Designed for CNC and CAD CAM milling machines Can be bonded using standard EVA adhesives after milling Suitable for multilayer constructions Use appropriate tool speed and feed for optimal finish nora® Lunatec CAD 45 is an ideal EVA milling material for orthotic, prosthetic, and orthopaedic footwear workshops requiring consistent machining quality, reliable strength, and efficient production in modern CAD CAM fabrication systems.

Read more less

nora® Lunatec CAD 55 is a high stability expanded EVA sheet developed specifically for CAD CAM milling applications in orthotics, prosthetics, and orthopaedic footwear production. With a hardness of approximately 55 Shore A and a density of around 0.30 g/cm³, this material provides excellent dimensional stability, clean machining performance, and reliable structural strength, making it ideal for precision milled orthotic components. The material is supplied with trimmed edges for accurate positioning in milling machines and consistent block alignment. Lunatec CAD 55 offers a uniform cell structure that allows smooth cutting, minimal tearing, and high surface quality, ensuring efficient production in both central fabrication and in clinic CAD CAM workflows. Material specification Hardness: approx. 55 Shore A Density: approx. 0.30 g/cm³ Structure: closed cell expanded EVA Surface: smooth Edges: trimmed for precise machining Designed for CAD CAM milling systems Available formats approx. 1000 × 650 mm (39.3 inch × 25.6 inch) approx. 1300 × 1000 mm (51.1 inch × 39.3 inch) Colour and thickness 318 ice blue — 30 mm, 35 mm Intended applications CAD CAM milled foot orthotics Milling blanks for insoles Orthopaedic footwear components Prosthetic and orthotic build ups Structural midsole elements Custom footbeds produced by CNC milling Central fabrication workflows Key properties Excellent milling performance Clean cutting with minimal tearing High dimensional stability Uniform material structure Reliable strength and durability Suitable for thick milling blanks Consistent results in automated production Closed cell hygienic material Processing notes Designed for CNC and CAD CAM milling systems Can be bonded using standard EVA adhesives Suitable for multilayer constructions after milling Ensure correct tool speed and feed for optimal surface finish nora® Lunatec CAD 55 is an ideal milling material for orthotic, prosthetic, and orthopaedic footwear workshops using digital production workflows, providing precise machining, reliable strength, and consistent quality for high performance custom devices.

Read more less

nora® Lunalastik is a resilient expanded EVA sheet designed for cushioning applications where good shock absorption, durability, and reliable elastic recovery are required. With a hardness of approximately 25 Shore A and a density of around 0.20 g/cm³, this material provides a balanced combination of softness and strength, making it suitable for orthotic insoles, foot beddings, and cushioning elements in orthopaedic footwear. Lunalastik offers excellent restoration capability after repeated loading, ensuring long term comfort and performance. The closed cell structure makes the material hygienic, washable, and resistant to moisture, while its high tear resistance allows reliable use in both manual and CAD CAM fabrication. Smooth and perforated versions are available to support multilayer constructions and improved bonding. Material specification Hardness: approx. 25 Shore A Density: approx. 0.20 g/cm³ Surface: smooth or perforated Sheet format: approx. 1150 × 750 mm (45.3 inch × 29.5 inch) Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: suitable for polychloroprene and standard EVA adhesives Structure: closed cell expanded EVA Available versions Smooth 07 beige — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 27 light blue — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm 81 black — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm 70 yellow — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm Perforated 07 beige — 3 mm, 6 mm Intended applications Cushioning sheets for orthopaedic insoles Soft bedding layers in custom made shoes Cushioning in ready made footwear Foot beddings and orthotic insoles Cushioning support for calcaneal spur Shock absorbing layers in footwear Comfort layers in orthoses Sandwich constructions in orthotic devices Key properties Excellent cushioning performance High elastic recovery Durable under repeated load Excellent tear resistance Comfortable walking properties Hygienic closed cell structure Washable and moisture resistant Easy to bond Suitable for multilayer constructions Processing notes Easy bonding using polychloroprene or standard EVA adhesives Adapt contact pressure according to material flexibility Thermoform at 110°C to 130°C (230°F to 266°F) Avoid excessive pressure to maintain cushioning properties nora® Lunalastik is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a durable cushioning EVA material with good resilience, strong tear resistance, and reliable comfort for insoles, foot beddings, and therapeutic footwear applications.

Read more less

nora® Lunairflex is a lightweight expanded EVA sheet designed for applications requiring soft cushioning with improved stability for medium load conditions. With a hardness of approximately 22 Shore A and a density of around 0.12 g/cm³, Lunairflex provides excellent resilience, good elastic recovery, and reliable comfort while offering more support than very soft EVA grades. It is well suited for inner shoe cushioning, orthotic insoles, and shaping elements where a balance between softness and durability is required. The closed cell structure makes the material hygienic, washable, and resistant to moisture, ensuring long lasting performance in clinical and workshop environments. Lunairflex is available in smooth and perforated versions, allowing flexibility in multilayer constructions and improved bonding where required. Material specification Hardness: approx. 22 Shore A Density: approx. 0.12 g/cm³ Surface: smooth or perforated Sheet format: approx. 1200 × 750 mm (47.2 inch × 29.5 inch) Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Structure: closed cell expanded EVA Available versions Smooth 07 beige — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 24 mm 27 light blue — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm Perforated 07 beige — 3 mm, 6 mm Intended applications Cushioning sheets for inner shoes Foot orthotics and insoles Shock absorbing layers in footwear Shaping elements for medium load applications such as calf prostheses Upper material for interim, therapy, and bathing shoes Bedding and damping layers in inner shoes Sandwich type orthotic constructions Soft lining material in orthoses Key properties Very low density EVA Soft with good stability Highly resilient with good recovery Comfortable walking properties Good shock absorption Hygienic closed cell structure Washable and durable Suitable for medium stress applications Ideal for multilayer constructions Processing notes Use standard EVA bonding methods Adapt contact pressure to the flexibility of the material Avoid excessive horizontal deformation during forming Thermoform at 110°C to 130°C (230°F to 266°F) nora® Lunairflex is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft but stable EVA material for cushioning, bedding, and medium load applications in insoles, orthoses, and therapeutic footwear.

Read more less

nora® Lunairmed is an ultra lightweight expanded EVA sheet designed for applications requiring maximum cushioning, very low weight, and high walking comfort. With a hardness of approximately 16 Shore A and a density of around 0.08 g/cm³, Lunairmed provides excellent resilience and shock absorption while remaining extremely soft and flexible. The material is ideal for inner shoe cushioning, foot beddings, and orthotic constructions where comfort and pressure relief are essential. Thanks to its closed cell structure, Lunairmed is hygienic, washable, and resistant to moisture, making it suitable for long term clinical use and for patients with sensitive or high risk feet. The material is available in smooth and perforated versions, allowing optimal bonding and flexibility in multilayer orthotic designs. Material specification Hardness: approx. 16 Shore A Density: approx. 0.08 g/cm³ Surface: smooth or perforated Sheet format: approx. 1080 × 825 mm (42.5 inch × 32.4 inch) Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Structure: closed cell expanded EVA Available versions Smooth 07 beige — 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 24 mm 80 anthracite — 2 mm, 3 mm, 4 mm, 6 mm, 8 mm 27 light blue — 2 mm, 3 mm, 4 mm, 6 mm Perforated 07 beige — 3 mm, 6 mm Intended applications Cushioning sheets for inner shoes Foot orthotics and foot beddings Shock absorbing layers in insoles Sandwich type insole constructions Pressure relief for diabetic and rheumatic feet Upper material for interim and therapy shoes Bathing and rehabilitation footwear Low stress shaping elements such as calf prostheses Soft lining material in orthoses Key properties Very low density EVA Extremely soft and flexible High resilience and elastic recovery Excellent walking comfort Good shock absorption Hygienic closed cell structure Washable and durable Suitable for sensitive and diabetic feet Ideal for multilayer constructions Processing notes Use standard EVA bonding methods Adapt contact pressure to the flexibility of the material Avoid excessive horizontal deformation during forming Thermoform at 110°C to 130°C (230°F to 266°F) nora® Lunairmed is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a very soft, lightweight EVA material for cushioning, pressure relief, and high comfort applications, especially in diabetic care, rheumatic conditions, and sandwich type insole constructions.

Read more less

nora® Lunatec Motion 20 is a soft expanded EVA sheet designed for orthotic and orthopaedic applications requiring effective cushioning, pressure relief, and resistance to shear forces. With a hardness of approximately 20 Shore A and a density of around 0.18 g/cm³, this material provides excellent bedding properties while offering greater stability than ultra soft EVA grades. It is particularly suitable for patients requiring high levels of comfort together with reliable support, including heavier users and those with sensitive or painful feet. The material absorbs both vertical and horizontal load, helping to minimise shear forces that can cause irritation, pain, or skin damage. Its closed cell structure makes it hygienic, durable, and washable, making it ideal for long term clinical use. Material specification Hardness: approx. 20 Shore A Density: approx. 0.18 g/cm³ Surface: smooth Edges: trimmed for accurate processing Sheet format: approx. 830 × 615 mm (32.6 inch × 24.2 inch) Colour: 382 white Thicknesses: 2 mm, 3 mm, 4 mm, 6 mm, 8 mm Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Intended applications Foot orthotics and insoles Cushioning layers in inner shoes Top cover layers for orthotic devices Pressure relief for sensitive feet Diabetic and neuropathic foot care Patients over 100 kg requiring additional support Rheumatoid and painful joint conditions Cushioning in classic orthoses Functional lining for support orthoses and corsets Protection of pressure sensitive areas Key properties Soft bedding with good stability Absorbs shear forces effectively Excellent damping in the horizontal load plane Helps reduce pain during walking Suitable for high body weight patients Closed cell hygienic structure Durable and washable Comfortable and flexible Processing notes Use standard EVA bonding methods Adjust contact pressure according to material flexibility Thermoform at 110°C to 130°C (230°F to 266°F) Avoid excessive pressure to maintain cushioning performance nora® Lunatec Motion 20 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops requiring a soft but stable EVA material for pressure relief, diabetic care, and high comfort orthotic constructions.

Read more less

nora® Lunatec Motion A12 is an ultra soft expanded EVA sheet developed for applications requiring maximum cushioning, pressure relief, and shear force reduction. With a hardness of approximately 12 Shore A and a density of around 0.13 g/cm³, this material provides exceptional bedding and damping properties, making it ideal for sensitive feet, painful joints, and high risk patients. The material is designed to absorb horizontal shear forces as well as vertical load, helping to reduce pain and improve comfort with every step. Its closed cell structure ensures durability, hygiene, and easy cleaning, while maintaining excellent flexibility and long term performance. Lunatec Motion A12 is widely used as a top layer, cushioning insert, or lining material in orthotic and orthopaedic applications. Material specification Hardness: approx. 12 Shore A Density: approx. 0.13 g/cm³ Surface: smooth Edges: trimmed for clean processing Structure: closed cell expanded EVA Thermoforming temperature: 110°C to 130°C (230°F to 266°F) Bonding: compatible with standard EVA adhesives Available formats Format 1100 × 700 mm (43.3 inch × 27.5 inch) Colours: 06 silk, 56 stone grey Format 1400 × 1100 mm (55.0 inch × 43.3 inch) Colour: 06 silk Thicknesses 2 mm 3 mm 4 mm 6 mm 8 mm Intended applications Foot orthotics and insoles Cushioning layers in inner shoes Top cover layers for orthotic devices Pressure relief for sensitive feet Diabetic and neuropathic foot care Rheumatoid and painful joint conditions Cushioning in orthoses Functional lining for support orthoses and corsets Protection of high pressure areas Key properties Extremely soft bedding material Excellent damping and cushioning Absorbs shear forces in the horizontal load plane Helps reduce pain during walking Flexible and comfortable Closed cell hygienic structure Durable and washable Suitable for sensitive and diabetic feet Processing notes Use standard EVA bonding methods Adjust contact pressure to suit the softness of the material Thermoform at 110°C to 130°C (230°F to 266°F) Avoid excessive pressure during forming to maintain cushioning properties nora® Lunatec Motion A12 is an ideal material for orthotic, prosthetic, and orthopaedic footwear workshops requiring maximum comfort, pressure relief, and shear force protection, especially for diabetic, rheumatic, and highly sensitive patients.

Read more less

nora® Lunatec Fusion 50 is a high density expanded EVA sheet designed for orthotic and prosthetic fabrication using adhesive free fusion bonding technology. With a hardness of approximately 50 Shore A and a density of around 0.30 g/cm³, this material provides increased stability and strength while maintaining good elasticity and shock absorption. It is suitable for structural layers, stabilising components, and multilayer orthotic constructions where firm support and reliable bonding are required. As part of the Lunatec Fusion system, the material allows permanent bonding between layers without the need for adhesive. When heated and processed under pressure, the EVA surfaces fuse together during the cooling phase, creating a strong and durable bond without glue, solvents, or intermediate layers. This allows faster production, cleaner working conditions, and environmentally friendly fabrication. Material specification Hardness: approx. 50 Shore A Density: approx. 0.30 g/cm³ Surface: smooth or perforated Sheet format: approx. 1020 × 675 mm (40.2 inch × 26.6 inch) Edges: trimmed for accurate processing Thermoforming temperature: approx. 130°C (266°F) Bonding: fusion bonding without adhesive within the Lunatec Fusion range Available versions Smooth Colour: 27 light blue Thickness: 8 mm, 12 mm Perforated Colour: 27 light blue Thickness: 4 mm, 8 mm Intended applications Orthotic insoles and footbeds Stabilising layers in orthoses Multi layer EVA constructions Midsole and reinforcement layers Sandwich constructions without adhesive Structural components in orthopaedic footwear CAD CAM and manual fabrication workflows High load orthotic builds Key properties High stability with good elasticity Dimensionally stable under load Good elastic recovery Reliable cushioning performance Fusion bonding without glue Clean and fast workshop processing No discoloration from adhesive Strong bond after cooling Suitable for deep drawing and vacuum forming Fusion bonding principle Lunatec Fusion materials bond directly to each other when heated and pressed together. During the cooling phase, the warmed EVA layers fuse permanently without adhesive or intermediate layers. Testing of peel resistance according to DIN EN 1392 has shown that the bond created can be stronger than the material itself, meaning the material may tear before the fused layers separate. The Lunatec Fusion range was developed to allow healthy and environmentally friendly fabrication without the use of adhesive, while still allowing the option of conventional EVA bonding when required. Processing instructions Roughen all bonding surfaces before heating Use perforated material where possible for optimal bonding Oven setting: approx. 130°C / 266°F Follow recommended heating times Apply sufficient pressure during vacuum forming Rule of thumb: heating time multiplied by two equals ideal cooling time Perforated sheets heat faster and may reduce heating time Cooling time depends on total material thickness Advantages of fusion processing No adhesive required Reduced fabrication time Clean working environment No solvent fumes No glue contamination No drying time Immediate use after cooling Strong permanent bond Environmentally friendly production nora® Lunatec Fusion 50 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops that require a firm EVA material with strong bonding capability, good elastic recovery, and efficient adhesive free processing within the Lunatec Fusion system.

Read more less

nora® Lunatec Fusion 40 is a medium density expanded EVA sheet designed for orthotic and prosthetic fabrication using adhesive free fusion bonding technology. With a hardness of approximately 40 Shore A and a density of around 0.20 g/cm³, this material provides an excellent balance between cushioning, stability, and elastic recovery. It is well suited for multilayer orthotic constructions, insoles, and structural comfort components where reliable bonding and dimensional stability are required. As part of the Lunatec Fusion system, the material allows permanent bonding between layers without the need for adhesive. When heated and pressed together, the EVA surfaces fuse during the cooling phase, creating a strong and durable bond without glue, solvents, or intermediate layers. This enables faster production, cleaner processing, and environmentally friendly workshop conditions. Material specification Hardness: approx. 40 Shore A Density: approx. 0.20 g/cm³ Surface: smooth or perforated Sheet format: approx. 1040 × 625 mm (40.9 inch × 24.6 inch) Edges: trimmed for clean processing Thermoforming temperature: approx. 130°C (266°F) Bonding: fusion bonding without adhesive within the Lunatec Fusion range Available versions Smooth Colour: 09 white Thickness: 4 mm, 8 mm, 12 mm Perforated Colour: 09 white Thickness: 4 mm, 8 mm Intended applications Orthotic insoles and footbeds Multi layer EVA constructions Cushioning and stabilising layers Comfort layers in orthoses Lightweight midsole builds Sandwich constructions without adhesive CAD CAM and manual fabrication workflows Diabetic and sensitive foot applications Key properties Lightweight and elastic EVA Good dimensional stability Reliable elastic recovery Comfortable walking properties Fusion bonding without glue Clean and fast workshop processing No discoloration caused by adhesive Strong bond after cooling Suitable for deep drawing and vacuum forming Fusion bonding principle Lunatec Fusion materials bond directly to each other when heated and pressed together. During the cooling phase, the warmed EVA layers fuse permanently without adhesive or intermediate layers. Testing of peel resistance according to DIN EN 1392 has shown that the bond created can be stronger than the material itself. In many cases, the material will tear before the bonded layers separate. Lunatec Fusion materials were developed to allow healthy and environmentally friendly fabrication without the use of adhesive. However, the material can also be processed with conventional EVA adhesives if required. Processing instructions Roughen all bonding surfaces before heating Use perforated material where possible for optimal bonding Oven setting: approx. 130°C / 266°F Follow recommended heating times Apply sufficient pressure during vacuum forming Rule of thumb: heating time multiplied by two equals ideal cooling time Perforated sheets heat faster and may reduce heating time Cooling time depends on total material thickness Advantages of fusion processing No adhesive required Reduced fabrication time Clean working environment No solvent fumes No glue contamination No drying time Immediate use after cooling Strong permanent bond Environmentally friendly production nora® Lunatec Fusion 40 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops that require a reliable EVA material with moderate firmness, strong bonding capability, and efficient adhesive free processing within the Lunatec Fusion system.

Read more less

nora® Lunatec Fusion 30 is a lightweight, flexible expanded EVA sheet developed for orthotic and prosthetic fabrication using adhesive-free fusion bonding technology. With a hardness of approximately 30 Shore A and a density of around 0.15 g/cm³, this material offers an ideal balance of cushioning, stability, and elastic recovery, making it suitable for multilayer orthotic builds, insoles, and comfort components where reliable bonding and dimensional stability are required. As part of the Lunatec Fusion system, the material can be permanently bonded to other Lunatec Fusion layers without adhesive. When heated and processed under pressure, the EVA surfaces fuse together during cooling, creating a strong, durable bond without glue, solvents, or intermediate layers. This allows faster production, cleaner workflows, and more environmentally friendly processing. Material specification Hardness: approx. 30 Shore A Density: approx. 0.15 g/cm³ Surface: smooth or perforated Sheet format: approx. 1000 × 700 mm (39.4" × 27.5") Edges: trimmed for accurate processing Thermoforming temperature: approx. 130°C (266°F) Bonding: fusion bonding without adhesive within the Lunatec Fusion range Available versions Smooth Colour: 378 blue Thickness: 2 | 3 | 4 | 6 mm Perforated Colour: 378 blue Thickness: 4 mm Intended applications Orthotic insoles and footbeds Multi-layer EVA constructions Cushioning and comfort layers Stabilising layers in orthoses Lightweight midsole builds Sandwich constructions without adhesive CAD/CAM and manual fabrication workflows Diabetic and sensitive foot applications Key properties Lightweight and flexible EVA Good elastic recovery Dimensionally stable Reliable cushioning performance Fusion bonding without glue Clean and fast workshop processing No discoloration from adhesive Strong bond after cooling Suitable for deep drawing and vacuum forming Fusion bonding principle The Lunatec Fusion range uses the natural bonding properties of EVA polymer to create permanent bonds between layers without adhesive. When heated to the recommended temperature and pressed together, the materials fuse during the cooling phase, forming a bond that can be stronger than the material itself. This process is similar to hot-melt bonding but requires no additional glue or intermediate layer. Processing instructions Roughen all bonding surfaces before heating Use perforated material where possible for optimal bonding Oven setting: approx. 130°C / 266°F Follow recommended heating times Apply sufficient pressure during vacuum forming Rule of thumb: heating time × 2 = ideal cooling time Perforated sheets heat faster and may reduce heating time Cooling time depends on total material thickness Advantages of fusion processing No adhesive required Reduced fabrication time Clean and healthy working environment No solvent fumes or glue contamination No drying or waiting time Immediate use after cooling Strong, permanent bond Environmentally friendly production nora® Lunatec Fusion 30 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops looking for a modern EVA material that combines comfort, stability, and efficient adhesive-free processing within the Lunatec Fusion system.

Read more less

nora® Lunatec Fusion 20 is a lightweight, soft, and highly elastic expanded EVA sheet designed for modern orthotic and prosthetic fabrication using adhesive-free fusion bonding technology. With a hardness of approximately 20 Shore A and a density of around 0.12 g/cm³, Lunatec Fusion provides excellent cushioning, low weight, and high elastic recovery, making it ideal for comfortable insoles, footbeds, and layered orthotic constructions. Part of the Lunatec Fusion range, this material allows permanent bonding between EVA layers without the use of adhesive. When heated to the recommended temperature and processed under pressure, the material fuses during cooling to create a strong, durable bond without glue, solvents, or intermediate layers. This enables faster, cleaner, and more environmentally friendly workshop production. Material specification Hardness: approx. 20 Shore A Density: approx. 0.12 g/cm³ Surface: smooth or perforated Sheet format: approx. 1050 × 760 mm (41.3" × 29.9") Edges: trimmed for clean processing Thermoforming temperature: approx. 130°C (266°F) Bonding: fusion bonding without adhesive within the Lunatec Fusion range Available versions Smooth Colour: 60 bright grey Thickness: 2 | 3 | 4 mm Perforated Colour: 60 bright grey Thickness: 4 mm Intended applications Orthotic insoles and footbeds Multi-layer EVA constructions Cushioning layers in orthoses Lightweight midsole builds Comfort layers for diabetic and sensitive feet Sandwich constructions without adhesive CAD/CAM or manual fabrication workflows Key properties Very lightweight, soft, and elastic Excellent elastic recovery Comfortable walking properties Low density with high durability Fusion bonding without glue No discoloration or hardening from adhesive Clean and healthy working environment Strong bond strength after cooling Suitable for multi-layer deep drawing Fusion bonding principle Lunatec Fusion materials bond directly to each other when heated and pressed, using the natural properties of EVA polymer. During the cooling phase, the warmed layers fuse permanently without adhesive or intermediate layers. Testing according to DIN EN 1392 has shown that the bond created can be stronger than the material itself. Processing instructions Roughen the materials before processing Use perforated material where possible for optimal bonding Oven setting: approx. 130°C / 266°F Follow recommended heating times Apply sufficient pressure during vacuum forming Rule of thumb: heating time × 2 = ideal cooling time Perforated materials heat faster and may reduce heating time Consider total material thickness when cooling Advantages of fusion processing Significant time savings Reduced material costs No adhesive required No drying time No solvent exposure No glue contamination Immediate use after cooling Environmentally friendly production nora® Lunatec Fusion 20 is ideal for orthotic, prosthetic, and orthopaedic footwear workshops looking for a modern, clean, and efficient EVA processing system that delivers high comfort, strong bonding, and reliable performance without the need for adhesives.

Read more less

nora® Lunacell top cover sheets are high-density expanded EVA materials developed specifically as durable covering layers for orthotic insoles and footbeds. With a hardness of approximately 68 Shore A and a density of around 0.37 g/cm³, Lunacell provides exceptional rigidity, wear resistance, and dimensional stability, making it ideal for thin top cover applications where strength and longevity are required. Available in both smooth and perforated finishes, Lunacell top covers offer excellent grip, clean finishing, and reliable bonding to EVA, cork, PU, and other orthotic base materials. The material is particularly suitable for high-stress insoles, work footwear, and orthopaedic applications where standard top cover materials may wear quickly. Material specification Hardness: approx. 68 Shore A Density: approx. 0.37 g/cm³ Surface options: smooth or perforated Sheet format: approx. 1080 × 850 mm (42.5" × 33.5") Thickness: 1.5 mm Colours available: 07 beige (smooth or perforated) 81 black (smooth) Thermoforming temperature: 120° – 170°C (248° – 338°F) Bonding: compatible with standard EVA adhesives Intended applications Top cover material for orthotic insoles Covering layer for thermoformed footbeds Reinforcing layer for thin insoles Durable surface for high-load footwear Work shoe and safety shoe insoles Orthopaedic footwear footbeds Key properties Very hard and rigid EVA top cover Anti-slip surface for improved grip Scratch-resistant and tear-resistant Highly stable and resistant to deformation Excellent trim and grinding properties Particularly durable in thin constructions Reliable bonding to EVA and other insole materials nora® Lunacell top cover sheets are designed for orthotic, prosthetic, and orthopaedic footwear workshops requiring a strong, long-lasting EVA covering material that maintains performance even under heavy daily use.

Read more less

nora® Lunacell is a high-hardness expanded EVA sheet developed for applications requiring exceptional stability, durability, and resistance to deformation. With a hardness of approximately 68 Shore A and a density of around 0.37 g/cm³, Lunacell is one of the firmest EVA materials available for orthotic, prosthetic, and orthopaedic footwear fabrication. It is particularly suitable where thin but strong layers are required, or where high mechanical stress demands long-lasting performance. The material is available in smooth and perforated versions, allowing use as both structural and covering material. Lunacell provides excellent trim properties, strong bonding performance, and reliable thermoforming behaviour, making it ideal for workshop fabrication as well as CAD/CAM workflows. Material specification Hardness: approx. 68 Shore A Density: approx. 0.37 g/cm³ Surface: smooth or perforated expanded EVA Thermoforming temperature: 120° – 170°C (248° – 338°F) Bonding: compatible with standard EVA adhesives High resistance to compression, tearing, and deformation Available formats Format 850 × 540 mm (33.5" × 21.3") Colour: 07 beige — 2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 mm Colour: 81 black — 10 | 20 mm Format 1080 × 850 mm (42.5" × 33.5") Colour: 07 beige — 1.5 mm Colour: 81 black — 1.5 mm Also available: Perforated version — 07 beige Typical applications Covering material for smooth or thermoformed insoles Lift sheets for high-load orthopaedic footwear Thomas heels with frontal median support Ladies’ block heels and wedge bottoms Midsole and stabilising components Insoles and foot beddings requiring reinforcement High-stress reinforcing layers in orthoses Thin but durable insole constructions Key properties Very hard and rigid EVA Highly dimensionally stable Anti-slip surface Scratch-resistant and tear-resistant Excellent durability even in thin layers Clean grinding and finishing Reliable bonding and thermoforming Suitable for high-load footwear and orthotic builds nora® Lunacell is a preferred material for orthotic, prosthetic, and orthopaedic footwear workshops when maximum stability, strength, and durability are required, especially in thin constructions or high-stress applications.

Read more less

nora® Lunalight A is a high-density expanded EVA sheet designed for applications requiring increased rigidity, dimensional stability, and durable structural support. With a hardness of approximately 60 Shore A and a density of around 0.35 g/cm³, this material provides excellent resistance to compression while maintaining the workability needed for orthotic and prosthetic fabrication. It is widely used for lift constructions, mid-soles, shell bottoms, and corrective build-ups where a firm and stable EVA layer is required. The smooth surface finish allows clean bonding and precise finishing, making Lunalight A suitable for both manual fabrication and CAD/CAM milling workflows. The material can be thermoformed and bonded using standard EVA processing techniques, ensuring compatibility with existing workshop equipment. Material specification Hardness: approx. 60 Shore A Density: approx. 0.35 g/cm³ Sheet format: approx. 860 × 550 mm (33.9" × 21.7") Surface: smooth, closed-cell expanded EVA Thermoforming temperature: 120° – 170°C (248° – 338°F) Bonding: compatible with standard EVA adhesives Available colours 05 light beige 07 beige 09 white 17 grey beige 19 stone 35 medium brown 41 pale brown 46 dark brown 56 stone grey 60 bright grey 78 dark blue 80 anthracite 81 black 89 red 352 jeans blue Available thicknesses 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 14 mm 16 mm 20 mm 24 mm (selected colours available in multiple thickness options) Typical applications Lift sheets for orthopaedic footwear Roll soles (butterfly rolls, joint rolls) Outer and inner edge elevation Mid-sole construction Shell bottoms and base layers Structural orthotic build-ups Prosthetic foot and sole components Key properties High rigidity and stability Excellent compression resistance Dimensionally stable under load Clean grinding and finishing Reliable bonding with standard adhesives Suitable for thermoforming and milling nora® Lunalight A is a proven material for orthopaedic, prosthetic, and footwear workshops requiring a firm EVA sheet that maintains shape and performance even under high mechanical stress.

Read more less

The nora® Lunasoft AL expanded EVA sheets are lightweight and stable materials developed for orthopedic footwear, orthotic devices, and shoe modifications where reliable lifting, support, and dimensional stability are required. This grade is particularly suitable as a lifting material for sports shoes, leisure footwear, and flexible street shoes where low weight and high stability must be combined. With a hardness of approximately 53 Shore A and moderate density, Lunasoft AL offers strong support while remaining lighter than many traditional lifting materials. The material provides good resilience, excellent restoration capability, and reliable shape retention, making it ideal for structural orthotic elements and stabilising components. The smooth surface allows easy bonding, grinding, and thermoforming, enabling efficient workshop processing. Lunasoft AL can be thermoformed for precise shaping, making it suitable for custom foot beddings, insoles, and orthopedic shoe modifications. The closed cell structure ensures the material is hygienic, washable, and resistant to moisture, which is important for medical and orthopedic applications. Key Features Expanded EVA sheet with smooth surface Lightweight with high stability Suitable for lifting and build up applications Good resilience and restoration capability Dimensionally stable under load Comfortable during walking Hygienic closed cell structure Washable and moisture resistant Thermoformable for precise shaping Reliable nora quality material Technical Specifications Material: nora® Lunasoft AL expanded EVA Hardness: approximately 53 Shore A Density: approximately 0.26 g per cubic centimetre Sheet size: approximately 920 × 560 mm (36.2 × 22.0 inches) Surface: smooth Available colours and thicknesses 07 beige — 6 mm, 10 mm, 20 mm 09 white — 6 mm, 8 mm, 10 mm, 20 mm 17 grey beige — 6 mm, 10 mm, 20 mm 19 stone — 6 mm, 10 mm, 20 mm 56 stone grey — 6 mm, 10 mm, 20 mm 46 dark brown — 6 mm, 10 mm, 14 mm, 20 mm 81 black — 6 mm, 8 mm, 10 mm, 14 mm, 20 mm Performance and properties Lightweight but stable material High resistance to compression Good resilience and recovery Suitable for structural orthotic use Durable for daily walking Excellent bonding with standard EVA adhesives Hygienic and easy to clean Processing notes Thermoformable at approximately 120 to 170 degrees Celsius Suitable for standard EVA bonding methods Easy to cut, grind, and shape Adapt pressure according to material thickness Typical applications in orthotics, prosthetics, and footwear Lift material for shoes Insoles and sport insoles Foot beddings Rearfoot support elements Orthotic shaping components Stabilising layers Orthopedic footwear modifications Flexible street shoes Sports footwear Workshop fabrication The nora® Lunasoft AL expanded EVA sheet is a lightweight and stable lifting material designed for orthopedic and orthotic fabrication, providing reliable support, easy processing, and long term durability for professional workshop use.

Read more less

The nora® Lunatec SE expanded EVA sheets are stable, resilient materials developed for orthopedic footwear, orthotic devices, and shoe modifications where strong support, lifting capability, and dimensional stability are required. This grade is especially suitable as a lifting material for sports shoes, street footwear, and orthopedic treatment applications. With a hardness of approximately 45 Shore A and higher density than standard EVA cushioning materials, Lunatec SE provides excellent restoration capability, high resilience, and reliable shape retention under load. The material remains flexible while offering strong support, making it ideal for structural elements such as rearfoot stabilisation, wedges, and shaping components. The smooth surface allows easy bonding, grinding, and thermoforming. Lunatec SE can be formed in a single block process, which makes it particularly suitable for foot beddings and orthotic constructions requiring stable support. The closed cell structure ensures the material remains hygienic, washable, and resistant to moisture, which is important for medical and orthopedic use. Key Features Expanded EVA sheet with smooth surface Stable and resilient material High dimensional stability Excellent restoration capability Suitable for lifting and shaping Good shock absorption with firm support Hygienic closed cell structure Washable and moisture resistant Thermoformable for precise shaping Reliable nora quality material Technical Specifications Material: nora® Lunatec SE expanded EVA Hardness: approximately 45 Shore A Density: approximately 0.29 g per cubic centimetre Sheet size: approximately 920 × 590 mm (36.2 × 23.2 inches) Surface: smooth Available colours and thicknesses 09 white — 6 mm, 10 mm, 14 mm 137 terra — 6 mm, 10 mm, 14 mm Performance and properties High stability under load Strong resilience and recovery Good support for lifting applications Durable for daily use Suitable for structural orthotic elements Excellent bonding with standard EVA adhesives Hygienic and easy to clean Processing notes Thermoformable at approximately 120 to 170 degrees Celsius Suitable for single block forming process Use standard EVA bonding methods Easy to cut, grind, and shape Typical applications in orthotics, prosthetics, and footwear Lift material for shoes Insoles and sport insoles Foot beddings Rearfoot stabilisation elements Orthotic shaping components Ankle caps Paralysis caps Semi rigid tongues Interim footwear Bathing shoes Orthopedic footwear fabrication The nora® Lunatec SE expanded EVA sheet is a strong and stable lifting material designed for orthopedic and orthotic fabrication, providing excellent support, reliable shaping properties, and long term durability in professional workshop use.

Read more less

The nora® Lunasoft SL Trendline expanded EVA sheets are lightweight, smooth EVA materials designed for orthopedic insoles, prosthetic applications, and footwear where cushioning performance and an attractive surface finish are required. The Trendline range features patterned and multi-colour designs, making it especially suitable for insole top covers, sport insoles, children’s footwear, and cosmetic prosthetic applications. With a hardness of approximately 40 Shore A and low density, Lunasoft SL Trendline offers excellent flexibility, resilience, and dimensional stability while maintaining high walking comfort. The material provides reliable shock absorption and good recovery after compression, making it suitable for both functional and cosmetic layers. The closed cell structure ensures the material is hygienic, washable, and resistant to moisture, allowing safe use in medical, orthopedic, and prosthetic devices. The smooth patterned surface gives a high quality appearance while remaining easy to bond, cut, and thermoform in the workshop. Key Features Expanded EVA sheet with smooth patterned surface Lightweight with good cushioning properties Flexible and resilient material Dimensionally stable under load Multi-colour and decorative designs Hygienic closed cell structure Washable and moisture resistant Suitable for covering and shaping Thermoformable for easy processing Reliable nora quality material Technical Specifications Material: nora® Lunasoft SL Trendline expanded EVA Hardness: approximately 40 Shore A Density: approximately 0.20 g per cubic centimetre Sheet size: approximately 1280 × 890 mm (50.4 × 35.0 inches) Surface: smooth patterned Available colours and thicknesses 4450 black-red — 2 mm, 3 mm 4451 black-red-yellow — 2 mm, 3 mm 4463 camouflage — 2 mm, 3 mm 4445 cork look — 2 mm, 3 mm Performance and properties Very lightweight material Good resilience and recovery Comfortable under load Durable for daily use Stable during walking Hygienic and washable Resistant to moisture and sweat Excellent bonding with standard EVA adhesives Processing notes Thermoformable at approximately 110 to 130 degrees Celsius Use standard EVA bonding methods Adjust pressure according to flexibility of the material Easy to cut, grind, and laminate Typical applications in orthotics, prosthetics, and footwear Insole top covers Custom foot orthotics Sports insoles Cushioning layers Children’s shoe midsoles Prosthetic socket covering Outer layer of two-layer sockets Shaping elements Orthopedic footwear Workshop fabrication The nora® Lunasoft SL Trendline EVA sheets provide a lightweight, durable, and visually distinctive material for orthopedic and prosthetic fabrication, combining reliable cushioning performance with modern patterned designs for professional workshop use.

Read more less

The nora® Lunasoft SL Color Plus / Quattro expanded EVA sheets are lightweight, smooth EVA materials developed for orthopedic insoles, prosthetic applications, and footwear where both cushioning performance and an attractive appearance are required. These sheets feature multi-colour layered designs, making them ideal for insole top covers, sports orthotics, children’s footwear, and cosmetic prosthetic finishes. With a hardness of approximately 40 Shore A and low density, Lunasoft SL Color Plus provides excellent flexibility, resilience, and dimensional stability while maintaining high walking comfort. The closed cell EVA structure makes the material hygienic, washable, and resistant to moisture, which is important for medical and orthopedic use. The coloured layered construction allows visually appealing designs while maintaining the same mechanical properties as standard Lunasoft SL. The large sheet format is especially suitable for high-volume insole production and workshop fabrication. Key Features Expanded EVA sheet with smooth surface Multi-colour layered design Lightweight with good cushioning properties Flexible and resilient Dimensionally stable under load Hygienic closed cell structure Washable and moisture resistant Ideal for insole top covers Thermoformable for easy shaping Reliable nora quality material Technical Specifications Material: nora® Lunasoft SL Color Plus / Quattro expanded EVA Hardness: approximately 40 Shore A Density: approximately 0.20 g per cubic centimetre Sheet size: approximately 1280 × 890 mm (50.4 × 35.0 inches) Surface: smooth Available colours and thicknesses 0281 white-black — 2 mm, 3 mm 9581 lemon-black — 2 mm, 3 mm 9681 pink-black — 2 mm, 3 mm 3981 lilac-black — 2 mm, 3 mm 4457 orange-blue — 2 mm, 3 mm 4444 four-coloured — 2 mm, 3 mm Performance and properties Very lightweight material Good resilience and recovery Comfortable under load Durable for daily use Stable during walking Hygienic and washable Excellent bonding with standard EVA adhesives Suitable for cosmetic and functional applications Processing notes Thermoformable at approximately 110 to 130 degrees Celsius Use standard EVA bonding methods Adjust pressure according to flexibility of the material Easy to cut, grind, and laminate Typical applications in orthotics, prosthetics, and footwear Insole top covers Custom foot orthotics Sports insoles Children’s footwear midsoles Prosthetic socket covers Cosmetic outer layers Orthopedic footwear Rehabilitation footwear Workshop fabrication High-volume insole production The nora® Lunasoft SL Color Plus / Quattro EVA sheets provide a lightweight, durable, and visually attractive solution for orthotic and footwear fabrication, combining reliable cushioning performance with modern multi-colour design options for professional workshop use.

Read more less

The nora® Lunasoft SL Color smooth EVA sheets are lightweight expanded EVA materials designed for orthopedic, prosthetic, and footwear applications where cushioning, flexibility, and durable surface covering are required. This colour range offers the same performance as Lunasoft SL with the added advantage of bright, attractive colours, making it ideal for insoles, children’s footwear, prosthetic covers, and custom orthotic devices. With a hardness of approximately 40 Shore A and low density, Lunasoft SL Color provides good shock absorption, high resilience, and excellent dimensional stability. The material remains flexible under load while maintaining shape, ensuring high walking comfort and long service life. The closed cell structure makes the material hygienic, washable, and resistant to moisture absorption, which is especially important for medical and orthopedic use. The smooth surface allows easy bonding, trimming, and thermoforming, making it suitable for both structural and cosmetic applications. Key Features Expanded EVA sheet with smooth surface Lightweight with good cushioning properties Flexible and resilient material Dimensionally stable under load Available in multiple bright colours Hygienic closed cell structure Washable and moisture resistant Suitable for covering, cushioning, and shaping Thermoformable for easy processing Reliable nora quality material Technical Specifications Material: nora® Lunasoft SL expanded EVA Hardness: approximately 40 Shore A Density: approximately 0.20 g per cubic centimetre Sheet size: approximately 1140 × 740 mm (44.9 × 29.1 inches) Surface: smooth Available colours and thicknesses 65 blue — 2, 3, 4, 6 mm 69 orange — 2, 3, 4, 6 mm 70 yellow — 2, 3, 4, 6 mm 89 red — 2, 3, 4, 6 mm 98 green — 2, 3, 4, 6 mm 111 royal blue — 2, 3, 4, 6 mm 348 lime — 2, 3, 4, 6 mm 349 blackberry — 2, 3, 4, 6 mm Performance and properties Very lightweight material Good resilience and recovery Comfortable under load Stable during daily use Durable and flexible Hygienic closed cell structure Resistant to sweat and moisture Excellent bonding with standard EVA adhesives Processing notes Thermoformable at approximately 110 to 130 degrees Celsius Use standard EVA bonding methods Adjust pressure according to flexibility of the material Easy to cut, grind, and laminate Typical applications in orthotics, prosthetics, and footwear Insoles and foot beddings Sports insoles Cushioning layers Insole top covers Children’s shoe midsoles Prosthetic socket covers Outer shell covering for two layer sockets Shaping elements Rehabilitation footwear Workshop fabrication The nora® Lunasoft SL Color EVA sheet is a lightweight, flexible, and hygienic material designed for orthopedic, prosthetic, and footwear workshops, offering excellent cushioning, easy processing, and attractive colour options for professional custom fabrication.

Read more less